MEROTEC LH C41AW, M0E-16ET-410 User Manual
The expert for robots in your home
With one click to the online shop
myRobotcenter.eu myRobotcenter.co.uk
myRobotcenter
LH C41AW
M0E-16ET-410
20V CORDLESS POLE HEDGE TRIMMER
Original Instructions
READ & UNDERSTAND
INSTRUCTION MANUAL
Save all warnings and instructions for future reference.
1
Read this manual carefully prior to assembling and
operating the pole hedge trimmer. It is dangerous to
operate this product without being familiar with these
instructions. Keep this manual in a safe place and have
it ready for future reference.
2
LH C41AW Original Instruction
TABLE OF CONTENTS
Description of Product Parts 2
Technical Specications 4
Intended Use 5
Safety Information 6
Assembly 15
Operation 17
Maintenance and Storing 20
Troubleshooting 21
EC Declaration of Conformity 22
1
Fig. 1
DESCRIPTION OF PRODUCT PARTS
6
8
9
4
7
Parts List
As shown in Fig. 1
1. Blade
2. Working head
3. Pivot knob
4. Quick release for telescopic handle
5. Pole tube
2
3
5
10
6. Front handle
7. Front handle adjusting knob
8. Safety lock-off button
9. Main switch
10. Blade sheath
1
2
DESCRIPTION OF PRODUCT PARTS
Check the delivery parts
As shown in Fig. 2
Carefully remove the machine from its packaging and check as the following parts are
complete:
Fig. 2
A
B
C
D
A. Conection handle 1pc
B. Hedge trimmer attachment 1pc
C. Front handle 1pc
D. Manual 1pc
WARNING: If any parts are damaged or missing, do not operate this tool until
the missing parts are replaced. Failure to heed this warning could result in
serious personal injury.
NOTE! Always recycle the packaging in accordance with local recycling
schemes.
3
TECHNICAL SPECIFICATIONS
Model Number LH C41AW
Voltage 20 V
Battery type Lithium-Ion
No load speed 1400 min
Cutting length/Capacity 410 mm / 14 mm
Tooth gap 16 mm
Measured sound pressure level(L
Measured sound power level(L
Guaranteed sound power level(L
) 74.5dB(A) K=3.0 dB(A)
pA
) 87.9dB(A) K=3.0 dB(A)
wA
) 90 dB(A)
wA
Weight 3.4 kg
Vibrations 2.0 m/s² K=1.5 m/s²
The sound values have been determined according to noise test code given in EN 607452-15, using the basic standards EN ISO 11094 and EN ISO 3744.
The noise gures quoted are emission levels and are not necessarily safe working levels.
Factors that inuence the actual level of exposure of work-force include the characteristics
of the work room, the other sources of noise, etc. i.e. the number of machines and other
adjacent processes, and the length of time for which an operator is exposed to the noise.
Also the permissible exposure level can vary from country. This information, however, will
enable the user of the machine to make a better evaluation of the hazard and risk.
Wear hearing protection! The sound intensity level for the operator may exceed 80 dB (A)
and ear protection measures are necessary!
The declared vibration value has been measured in accordance with a standard test
method (according to EN 12096) and may be used for comparing one product with
another. The declared vibration value may also be used in a preliminary assessment of
exposure.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
-1
WARNING!
Depending on the actual use of the product the vibration values can differ from the
declared total! Adopt proper measures to protect yourself against vibration exposures!
Take the whole work process including times the product is running under no load or
switched off into consideration!
Proper measures include among others regular maintenance and care of the product and
cutting attachments, keeping hands warm, periodical breaks and proper planning of work
processes!
4
INTENDED USE
This Li-ion pole hedge trimmer is intended for trimming hedges, bushes and shrubs.
Observe the technical data for the maximum cutting capacity. Do not cut non plant
material or branches exceeding the stated maximum capacity. For safety reasons it is
essential to read the entire instruction manual before rst operation and to observe all the
instructions there in. This product is intended for private domestic use only, not for any
commercial trade use. It must not be used for any purposes other than those described.
5
Loading...