Merlin Flash Charger Wireless Instruction Manual

Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.

The documentation provided will allow you to fully enjoy all the
features this unit has to offer.

Please save this manual for future reference.

Instructions

The Merlin Flash Wireless charger allows you to effortlessly charge
your smart device without connecting any cables.

1) Start by connecting your USB charger to the wall socket.

2) Connect as standard micro usb 2.0 cable to the wall charger.

3) Connect the cable to the micro usb port on the wireless charger.

Note: For products that support fast wireless charging please connect
a QC2.0 fast charger like the Merlin Flash charger to the wireless
charger.

FAQ

Q) Does the wireless charger support fast wireless charging?

A) Yes. Please connect a QC2.0 charger like the Merlin Flash
Charger to the wireless charger.

Q) Will my phone work with the wireless charger?

A) Any device that is Qi-enabled will work with this product.
Please consult your device’s user manual for specifications.

Maintenance:

1. Retain these instructions for future use.

Usage:

1) Once the wall charger is connected to the wireless charger as
blue light will flash twice and then turn off. This shows the unit is
in standby mode.

2) To start the charging your device place your phone on the
wireless charger. The blue light will turn on to indicate it is
charging.

2. Clean the product with a damp cloth and mild soap.

3. Do not expose this product to rain or moisture.

4. Be careful not to turn or twist the cables used in this
product too much as it can lead to malfunction and
failure.

5. This product is not designed to be submerged in water
and will malfunction if this occurs.

6. This product has no user serviceable items inside. Do not
open this product as the user risk injury and would void
the warranty.

7. Please keep this device at least 20cm away from medical
implants such as pacemakers and cochlear implants.

8. Don’t keep and magnetic strip or chip & pin cards (eg. ID,
bank cards) close to the charger.

1

2