Meris Polymoon Delay Pedal User manual
MANUAL v.1i
MORE THAN LOGIC. UNITING ART + ENGINEERING.
CONTACT
email: info@meris.us
phone: 747.233.1440 website: www.meris.us
TABLE OF CONTENTS
SECTION 1 PG. 1 FRONT PANEL CONTROLS
SECTION 2 PG. 2-4 GLOBAL SETTINGS CONFIGURATION MODE
SECTION 3 PG. 4 DESIGN CONCEPT
SECTION 4 PG. 4-6 SIGNAL FLOW OVERVIEW
4a - DYNAMIC FLANGER
4b - DELAY LINE NETWORK
4c - DELAY NETWORK HEX MODULATION
4d - DUAL BARBERPOLE PHASER
SECTION 5 PG. 7-8 EXP JACK MODES IN DEPTH
5a - EXPRESSION PEDAL
5b - TAP SWITCH
5c - 4 BUTTON PRESET SWITCH
5d - MIDI
SECTION 6 PG. 9 KNOB AUTO SCAN IN DEPTH
SECTION 7 PG. 9 PRESETS IN DEPTH
SECTION 8 PG. 9 TEMPO IN DEPTH
SECTION 9 PG. 10 MIDI CC TABLES
SECTION 10 PG. 11 PRESET FACTORY 1 SETTINGS
SECTION 11 PG. 12 TECHNICAL SPECIFICATIONS
SECTION 1 - FRONT PANEL CONTROLS
Feedback: Sets the feedback amount
Alt Function: Feedback Filter Controls filter in the
feedback path. Set to noon for no
Time: Sets the time for the delay and the
synchronized phaser
Alt Function: Early Modulation
Triangle waveform modulation of the early delay
taps. Ranges from gentle modulation, to FM, to
pitch effects
Multiply: Sets the number of delay taps added to
the output
Alt Function: Late Modulation
Triangle waveform modulation of the later delay
taps. Ranges from gentle modulation, to FM, to
pitch effects
Hold to access Alt Functions:
Alt Functions are only accessible when this
button is held
Tap: Sets the time for the delay and the
synchronized phaser
Alt Function: Dotted Eighth Note
Changes current tempo from 1/4 notes to dotted
1/8 notes
Hold Tap: to engage Half Speed Delay
filtering, set towards minimum for a darker filter, set
towards maximum for a brighter filter
Dimension: Sets the dimension amount. Dimension
smears and sustains the delay tap reflections
Alt Function: Dynamic Flanger Mode Set to minimum
for Envelope Down, set to noon for Envelope Up, and
set to maximum for LFO
Mix: Adjusts the balance between
Dry and Wet signals
Alt Function: Delay Level Sets the
gain of the Wet signal. Ranges from
0dB to -12dB. For auto-scaling, set
to min
Dynamics: Sets the intensity/depth
of the Dynamic Flanger.
Flanger is off at minimum
Alt Function: Dynamic Flanger Speed
Sets the envelope
attack time or LFO speed based on
the Dynamic Flanger Mode
(Press to Select Phaser)
Slow: Stereo Barberpole phaser with
fixed speed of 0.1 Hz
Sync: Stereo Barberpole phaser with
speed linked to a quarter note of the
delay time
Slow + Sync: Stereo Barberpole
phaser with speed linked to a whole
note of the delay time
Bypass: Disables processing and
passes the input through to the
output
Alt Function: Dynamic Flanger Feedback Adds negative feedback to the
Dynamic Flanger
1
(L) LED indicates
INSTRUMENT LEVEL
LINE/SYNTH LEVEL:
I
N
S
T
R
U
M
E
N
T
L
E
MIDI THRU ON:
SECTION 2 - GLOBAL SETTINGS CONFIGURATION MODE
TO START GLOBAL SETTING
CONFIGURATION MODE
INPUT MODE:
N
I
O
N
O
M
S
T
E
R
E
O
I
N
(
T
R
S
)
HOLD (L) LED switch on power up (power up takes 3
secs); all of the front panels LEDs will blink 3 times
KILL DRY:
only in active mode; in bypass, the entire pedal is muted.
*With DRY MUTED, the pedal delivers wet
D
R
E
V
I
T
C
A
Y
R
D
Y
M
U
T
E
D
*
(L) LED indicates MONO (R) LED indicates TRS
P
R
A
T
EXPRESSION
MODE:
Expression Tap
P
X
E
P
E
S
E
T
M
I
D
I
(L) LED indicates
DRY ACTIVE
2
4 Button Switch MIDI
(R) LED indicates
DRY MUTED
LINE/SYNTH LEVEL:
LEDs on front panel blink to indicate binary
MIDI CHANNEL:
T
u
r
n
k
n
o
b
t
o
s
e
l
e
c
TRAILS:
Trails
Glide
(OFF)
(OFF)
Trails
Glide
(ON)
(OFF)
BYPASS MODE:
L
T
N
E
M
U
R
T
S
N
I
(L) LED indicates
INSTRUMENT LEVEL
MIDI THRU ON:
L
E
V
E
Toggle (R) foot switch GLOBAL TEMPO:
L
I
N
E
L
E
V
E
L
(R) LED indicates LINE LEVEL
P
Y
B
D
E
R
E
F
F
U
B
(L) LED indicates
BUFFERED BYPASS
S
S
A
R
E
L
A
Y
B
Y
P
A
S
S
(R) LED indicates
RELAY BYPASS
Toggle (L) foot switch
(R) LED indicates MIDI THRU(L) LED indicates MIDI OUT
(L) LED indicates
GLOBAL TEMPO
(R) LED indicates per
PRESET TEMPO
3
Loading...