Meridian Audio SRC-2010 Owners manual

FAROUDJA

SRC-2010

PROGRAMMABLE REMOTE
CUSTOM PROGRAM

The SRC-2010 remote has been programmed with Infrared codes for the
Faroudja processor and display products. Additional devices can be
programmed in a PC using the free software to create a new layout and
then “flash” the IR codes to the device. Instructions on this process can
be found in the attached manual. See each products manual for specific

desriptions of the available commands.

Press here to control the video processor func­tions

Press here to control the transport functions for
the DCS DVD drive

Press here to control the plasma displays

Press here to control the DILA2 projector

Press here to control the NRS processor

Software is available to edit
the remote layout and
button selection. Download
the program at
www.faroudja.com. See the
Help menu in the software.

Unfold here

SLC-2081 Connecter User’s guide

Function

1. Use the SLC-2081 to connect the remote to the PC.

2. Edit the layout of the remote using the free editing software
available at www.faroudja.com.

3. Transmission cable included.

4. Easily duplicate all data between two remotes by the transmission cable.

Package

SLC-2081 connecter

Transmission cable

Operation

A. Computer connection to edit the remote and transfer data.

1. Connect the remote and computer
with SLC-2081 and cable.
Install the batteries before proceding.

2. Download the “Remote Comm”
software from www.faroudja.com.

www.faroudja.com