MERIDIAN AUDIO L Active Speakers Overview data

Page 1
the closest approach to the original sound.
L Series Studio Active Loudspeakers
P e r f o r m a n c e
s e r i e s
Page 2
2
Page 3
Philosophy
Quad has, since the 1950s, led the field in loudspeaker development. The famous Quad electrostatics are now, quite rightly, regarded amongst the very finest loudspeakers money can buy.
With a fifty-strong R&D team, our research into acoustics and reproduction leads the field in development of quality hi-fi equipment. British design and engineering coupled with the industry’s most efficient manufacturing facility combine to create products unequalled in terms of value and performance.
Our philosophy is based upon a belief that hi-fi should add nothing nor remove anything from a recording – merely reproduce it. The resulting sound should be without artefacts, distortion, colouration and truly revealing of the recording process.
Quad products are sometimes seen as the kind of products bought at the end of a journey through hi-fi; we believe they mark the beginning.
The Quad
Page 4
4
The L- Studio active was born of Quad’s desire to simplify high-performance and to create the ideal amplifier module to control what has become a reference for its class.
Quad designed an amplifier module to work in absolute synergy with the L-series, compact enough to fit within the confines of the cabinet, yet powerful enough to deliver a full, rich and detailed sound.
Designing an active speaker is really the perfect foil for most loudspeaker designers. Being able to correct acoustic abhorations through equalisation is a desirable objective. What though if the speaker you are starting with is already a class leader? What if it’s response is already flat within 3dB from 20Hz to over 20kHz.
The objective then is to deliver an amplifier module which can fully realise the capability of the loudspeaker. To offer a clean signal path free from lossy, long cable runs and be perfectly matched to the impedance characteristics of the loudspeaker.
At Quad we have taken this one stage further. Each amplifier module contained in each single speaker contains not just one, but two amplifier modules.
A powerful and dynamic 60W amplifier is used to control the bass driver whilst a refined 40w amplifier controls the high-frequency response. Simple high and low-pass filters can be used on each amplifier section to replace the crossover and in-so-doing a revelation occurs.
Not only is the bass fast and rhythmic; the treble sweet and free from constraint, the mid-band takes on a new ‘fluid’ dimension, released from congestion and phase interference, to present vocals and complex harmonies in a totally natural, detailed and layered fashion.
The specification of one of the finest loudspeakers of recent times combined with four amplifiers per pair of speakers in a horizontally bi-amped configuration is remakable in itself, yet the performance stands alone as justification enough for these loudspeakers.
L-Studio active
The Quad
Page 5
The original L-series entered hi-fi’s hall of fame in 2002, with the 11L winning What Hi-Fi? magazine’s prestigious ‘Product of the Year’ Award – an accolade that was repeated the following year, and again in 2004, winning best in class. Around the world the pattern was repeated with major awards from leading magazines on every continent.
Page 6
6
Page 7
Versatility
L
-Studio active
The L-studio active speakers are as versatile in use as they are remarkable in performance.
Having both standard RCA connectors, and balanced inputs, they are fully compatible with a wide range of source components.
Whether it is a small MP3 player or our own performance series 99CDP-2, these loudspeakers will enable you to get the most from your music.
Each loudspeaker has its own independent volume control. By using this to set the balance and overall outout level, any source device with a variable level volume can be used. the 99CDP-2 is ideal for a high-quality bedroom or kitchen system.
Coupled with a network music player, they enable you to listen to your music collection anywhere in the house ­without the quality restraints usually involved in such systems.
Page 8
8
Good Design
The theory of
According to Quad’s philosophy a good loudspeaker should add nothing, nor remove anything from the recorded sound.
That’s fine in theory, but how can we make sure that our loudspeaker designs adhere to this principle?
The answer is both simple and complex. Put simply, we manufacture everything ourselves - that’s not we
make the cabinet ourselves and buy in drive units - it’s not that we make our own crossovers to tune a ‘cobbled-together’ loudspeaker.
We manufacture every part of every loudspeaker from raw materials:­Wood, metal, KEVLAR, rubber and plastics.
Our designers and engineers have complete freedom. If they want to develop a new chassis - no problem; if they want to experiment with new materials - that’s fine. Because we rely on nobody else, we can design the complete product with complete synergy - every part tweaked and honed to form a perfect symbiotic relationship with every other part.
That’s why, with Quad products the whole is always much greater than the sum of the parts.
Page 9
Page 10
Specifications
L Studio Series
Model
11L Studio
Passive Components
Transducer Complement
Cone Bass driver
Soft Dome Tweeter
Bass driver
Tweeter
Active Components
Bass Power Amplifier
Treble Power Amplifier
Active Crossover Network
System Performance
Frequency response +/-6dB
Bass Filter
Short-term Peak SPL (@1m)
Upper frequency limit -10dB
Input Impedance @ 1 kHz
Input Sensitivity
Signal/Noise Ration
System Fb
Magnetic Screening
Mains Voltage
Power Consumption
Physical Characteristics
Balanced signal input socket
Unbalanced signal input socket
Mains input connector
Enclosure type
Enclosure construction material
Product dimensions HxWxD
Net Weight
Finish
2 Way
5” 125mm
1” 25mm
D688
D695
60W Current Dumping
40W Current Dumping
1.8 kHz
45Hz-24kHz (unfiltered)
-6dB/Octave (rel. 100Hz)
102dB
32kHz
10K Ohms
0.775V (0dBu)
>100dB
55Hz
Yes
230V or 110V available
22W idle; 120W max.
XLR - 1/4 TRS jack combo
RCA phono (cinch)
3 pin IEC fused
Ported
15 & 25mm MDF
326 x 190 x 284mm
8.2Kg
Piano Gloss Black
12L Studio
2 Way
5” 170mm
1” 25mm
D689
D695B
60W Current Dumping
40W Current Dumping
1.8 kHz
45Hz-24kHz (unfiltered)
-6dB/Octave (rel. 100Hz)
110dB
32kHz
10K Ohms
0.775V (0dBu)
>100dB
50Hz
Yes
230V or 110V available
22W idle; 120W max.
XLR - 1/4 TRS jack combo
RCA phono (cinch)
3 pin IEC fused
Ported
15 & 25mm MDF
357 x 205 x 308mm
9.7Kg
Piano Gloss Black
10
Page 11
Loudspeakers
• L-ITE 5.1 System
• L-ITE Mini Loudspeaker - Pair
• L-ITE Centre Loudspeaker - Single
• 9L2 Loudspeaker - Pair
• 11L2 Loudspeaker - Pair
• 12L2 Loudspeaker - Pair
• 21L2 Loudspeaker - Pair
• 22L2 Loudspeaker - Pair
• L2 Centre Loudspeaker - Single
• L2 Subwoofer - Single
• L-ITE Subwoofer - Single
Electronics
• 99 CDP-2
• 99 CD-S
• 99 Pre
• 99 Stereo
• 99 Tuner
• 909 Stereo
• 909 Mono
Electrostatic Loudspeakers
• ESL - 989
• ESL - 988
Amplifiers
• II-forty Power Amplifier (mono)
• II-Classic Power Amplifier
• QC-twenty four Pre Amplifier
• QC-24P Phono stage
Electrostatic Loudspeakers
• ESL - 2805
• ESL - 2905
Referenc e
s e r i e s
P e r f o r m a n c e
s e r i e s
Clas s i c
s e r i e s
Quad Product Range
ESL - 2805
99 - Pre Amp 99 - Power Amp
Quad ll-Forty Power Amp QC24 Pre Amp
Page 12
Qu.LA.0 6.2 007
Quad Electr oacoustics Ltd,
IAG House, Sove reign Court, Ermine Business Park,
Huntingdo n, Cambs, PE29 6XU
Tel :- 01480 447700, Fax :- 01480 431767 www.quad-hifi.co.uk
The inf ormatio n in this b rochure is s ubject to cha nge witho ut notice. All r igh ts res erve d © 2 006 Qu ad Quad i s a m ember of the Inter nat ional Audio Group
Loading...