DSP5200
Digital Signal Processing
Loudspeaker System
www.meridian-audio.com
New triple amplifier design
based on the acclaimed
DSP8000 minimizes
colouration
Powerful, compact and
elegant digital active
loudspeaker with 2 1/2-way
DSP crossover
Self-contained audio system
with three custom drivers,
three amplifiers, two digital
converters, digital crossovers
and advanced sound-shaping
DSP computers for maximum
fidelity
Listener remote control
features including bass, treble
tilt, listening axis, volume,
time-compensated balance
and absolute phase
Dynamic bass protection
system avoids LF distortion at
high levels
Controls accommodate
different room positions
Ultra-rigid cabinet in veneered
ply, braced and resin damped
for maximum sonic purity
Available in black or silver
high gloss lacquer, satin
santos rosewood, natural satin
maple, satin stained cherry
and black ash finishes
Maximum output level
up to 108dB spl
Meridian's acclaimed DSP-based loudspeakers are unparalleled in the industry. They
combine excellent acoustic and drive-unit technology, with multiple built-in power amps
and unique performance-enhancing DSP and digital conversion systems.
The Meridian DSP loudspeaker is the ultimate expression of our loudspeaker philosophy.
Active loudspeakers mean giving each driver its own amplifier in direct and close
control of all its parameters. DSP capability means crossover specifications that cannot
be matched by conventional designs and bass extension vastly superior to other
loudspeakers of the same volume. Keeping the signal in the digital domain until the last
moment means that there is an unbroken link between the recording studio or concert
hall and your listening room.
The new DSP5200 takes these principles to the highest ever level in a smaller
loudspeaker.
Meridian Audio Limited
Latham Road
Beaufort Park
Huntingdon
Cambridgeshire PE29 6YE
England
T +44 (0) 1480 445678
F +44 (0) 1480 445686
Meridian America Inc
8055 Troon Circle, Suite C
Austell
Atlanta GA 30168-7849
T +1 (404) 344 7111
F +1 (404) 346 7111
DSP5200
Digital Signal Processing
Loudspeaker System
www.meridian-audio.com
DSP5200DS v1.0 10122004 RE
The DSP5200 takes the elegant
appearance and advanced design
of Meridian’s flagship DSP8000 and
popular DSP7000 and delivers it in
a compact package under 36in tall.
Indeed, m
any of the features that
make the 5200 a truly impressive
smaller loudspeaker derive from the
larger systems in the range.
Ideal
for more spacious as well as smaller
rooms, these loudspeakers will do
justice to any system, in almost any
justice to any system, in almost any
environment.
The self-contained system combines
a 2 1/2-way crossover design, three
custom drivers, three amplifiers, two
multi-bit delta-sigma digital converters,
digital crossovers and computers to
deliver an impressive, powerful and
accurate sound with full remote control
over bass, treble tilt, time-correct
balance, absolute phase, tweeter
axis and input. The latest technology
gives the DSP5200 uncompromised,
precise detail with pinpoint imaging
and dimensionality in both stereo and
surround. Advanced signal processing
packs dynamics and bass into a size
that defies imagination. DSP controls
allow correction of the frequency
response in a variety of locations.
Cabinet design
An enhanced basket design with sturdy
clamp rings delivers the very best
performance from the drivers, which
are chosen specifically for their sound.
T
he stylish, curved and tapered cabinet
both increases stiffness and improves
thick multi-layer materials, with
Inside the DSP5200
the cabinet for maximum neatness
to be placed closer to power amplifiers,
to none.
The bottom line
– is intended to look as good as it
Outline Specifications
Frequency response in-room within 3dB from 35Hz to over 20kHz. Linear-phase mid/top crossover.
1 x 25mm aluminium-dome tweeter, silver wire, short horn-loaded.
Amplifiers
Weight
Meridian retains the right to improve or modify
product specifications and design at any time.
E&OE.
Loading...