![](/html/3f/3fff/3fffe633303cf4247bd6acae045f025260a47d804b6360cd60685f5c817ef528/bg1.png)
V3 861 RS232 Information
Data from JMB 4i02
Meridian Version 3 861 RS232 Interface.
General Information
The RS232 interface for the 861 can be operated from any terminal that operates at 9600 baud with 1
start bit, 1 stop bit and no parity. Commands take the form of 2 ASCII characters, in some case s
followed by a signed argument. All characters are echoed by the processor. A carriage return
character will execute the command and backspace is also implemented. When a command is
executed, the 861 will return 20 characters.
Basic Functions
The followi ng tables list the basic commands available and show examples of the messages returned.
In each case the message retuned via RS232 corresponds with the display on the front panel of the
processor.
Source Commands
RS232 Command Description Message Returned
CD Select CD source
RD Select Radio
LP Select LP
TV Select TV
T1 Select Tape 1
T2 Select Tape 2
CR Select CDR
CB Select Cable
DV Select DVD
V1 Select VCR 1
V2 Select VCR 2
LD Select Laser Disc
COnn Select Copy source1
Volume Commands
RS232 Command Description Message Returned
VP Volume +
VM Volume VNnn Go to volume (1-99)
MU Mute
General Commands
RS232 Command Description Message Returned
SB Standby
MR Menu Right
ML Menu Left
MP Menu Plus (Up)
MM Menu Minus (Down)
PNnn Goto preset2
CD Trifield 65
Radio Music 65
LP Music 65
TV TV Logic 65
Tape1 Music 65
Tape2 Music 65
CDR Trifield 65
Cable Pro Logic 65
DVD Pro Logic 65
VCR1 Pro Logic 65
VCR2 Pro Logic 65
LDisc THX Cinema 65
Copy Ldisc
CD Trifield 66
CD Trifield 64
CD Trifield 87
Mute
.
CD Centre +OdB
CD Balance <O>
CD Balance <1
CD Balance 1>
CD Trifield 65
Meridian Audio Limited, Stonehill, Stukeley Meadows, Huntingdon, Cambs PE29 6EX
Tel +44 1480 445678 Fax +44 1480 445686
http://www.meridian-audio.com/
![](/html/3f/3fff/3fffe633303cf4247bd6acae045f025260a47d804b6360cd60685f5c817ef528/bg2.png)
V3 861 RS232 Information
Data from JMB 4i02
Additional Source Commands – Correspond to MSR4 keys
RS232 Command Description RS232 Command
PL Play rp AB Repeat
ST Stop AB AB Repeat
PS Pause PH Phase
RP Repeat TB T (MSR 3)
NE Next #B # button
PR Previous CH Chapter (MSR3)
DI Display SE Setup
SR Store ME Menu
CL Clear RT Return
DP Decimal Point EN Enter
FF Fast Forward TM Top menu
FB Fast Back NP Next page
N0 – N9 Number keys 0 - 9 PP Previous page
OP Open cl Fn Clear
MO Mono sr Fn Store
SL Slow di Fn Display
BA Band mu Fn Mute
AU Audio mp Fn Menu U
SU Subtitle on/off mm Fn Menu D
su Subtitle choice ml Fn Menu L
OS OSD mr Fn Menu R
RC Record vp Fn Volume Up
AN Angle
1. Source argument
RS232 Command Description
CO0 Copy CD
CO1 Copy Radio
CO2 Copy LP
CO3 Copy TV
CO4 Copy Tape1
CO5 Copy Tape2
CO6 Copy CDR
CO7 Copy Cable
CO8 Copy DVD
CO9 Copy VCR1
CO10 Copy VCR2
CO11 Copy LDisc
CO12 Copy Source
CO13 Copy Mute
RS232 Command Description RS232 Command Description
PN0 Direct PN13 Dig THX
PN1 Music PN14 DTS
PN2 Trifield PN15 DTS THX
PN3 Ambisonics PN16 DTS Music
PN4 Super PN17 MPEG
PN5 Stereo PN18 MPEG THX
PN6 Mulogic PN19 MPEG Music
PN7 Pro Logic PN20 MLP
PN8 THX PN21 PLII Music
PN9 Mono PN22 PLII Movie
PN10 Direct PN23 PLII THX
PN11 TV Logic
PN12 Digital
vm Fn Volume Down
2. Goto Preset argument
Subsequent values call user presets
Description
Meridian Menu Commands
The RS232 interface allows direct access to menu commands on version 3 Meridian 861. The existing
menu commands (ML, MR, MM, MP) have not been replaced but an extra command sequence allows
direct access to any menu and for a value to be entered into that menu. It must be noted that not all
menus will be available for direct access at all times. For example it is not possible to access the
Centre Delay wh ile listening in Direct mode. In these cases an error message will be returned.
The command string ‘APnnxx’ sets menu ‘nn’ to value ‘xx’, where both are hexadecimal numbers and
‘xx’ is two’s complement allowing negative values to be represented. The table below gives details.
When using this feature you should note that some menus work in half unit steps and that entering
invalid numbers will return an error message.
Example: AP0102 sets the treble to +1dB
AP0103 sets the treble to +1.5dB
Meridian Audio Limited, Stonehill, Stukeley Meadows, Huntingdon, Cambs PE29 6EX
Tel +44 1480 445678 Fax +44 1480 445686
http://www.meridian-audio.com/