QUAD
return
to
77
Quad 77 AV Processor Amplifier SPECIFICATIONS
file:///C:/Documents %20and%20Settings/Frank/My%20Documents/M...
Created with Print2PDF. To remove this line, buy a license
77
AV PROCESSOR AMPLIFIER
Specifications
Inputs Sensitivity Input impedance
AV 1 User configurable
AV 2 User configurable
AV 3 User configurable
Quadlink Fixed 2V 10Kohm
Outputs
RCA phono Front left 775mV 1Kohm
Front right 775mV 1Kohm
Centre 775mV 220 ohm
Left surround 775mV 220 ohm
Right surround 775mV 220 ohm
Subwoofer 775mV 220 ohm
Ampbus Front left 2V 20 ohm
Front right 2V 20 ohm
Centre 2V 20 ohm
Left surround 2V 20 ohm
Right surround 2V 20 ohm
Subwoofer 2V 20 ohm
Power
Modes 10
"Pro Logic" 5 channels with wide bandwidth centre channel
5 channels with normal bandwidth centre channel
5 channels with phantom centre channel
"Dolby 3" 3 channels with wide bandwidth centre channel
3 channels with normal bandwidth centre channel
"FX" 2 channels with surround Club effect
2 channels with surround Hall effect
2 channels with Church effect
2 channels with Stadium effect
"Stereo" 2 channels bypassing all processing circuitry
Performance The following is valid for any input type (RCA phono,
Centre or
subwoofer
Quadlink) and any output type (RCA phono, AMPBUS or
Power).
100 or 300 or
775mV
100 or 300 or
775mV
100 or 300 or
775mV
Nominal output
level
2V 1.5uH//3.3ohm
33Kohm
33KOhm
33Kohm
Output
impedance
main page
at: http://www.binarynow.com/
1 of 2 27/10/2010 10:05 p.m.
Mode Channel Bandwidth THD@1KHz Noise "A" wtg.
Quad 77 AV Processor Amplifier SPECIFICATIONS
file:///C:/Documents %20and%20Settings/Frank/My%20Documents/M...
Created with Print2PDF. To remove this line, buy a license
Pro Logic/FX L&R 10Hz to 50KHz 0.05% 91dBu
Pro Logic/FX C (normal) 150Hz to 50KHz 0.05% 91dBu
Pro Logic/FX C (wide) 10Hz to 50KHz 0.05% 91dBu
Pro Logic/FX Rear 10Hz to 7KHz 0.3% 84dBu
Pro Logic/FX Subwoofer 10Hz to 50KHz 0.05% 91dBu
Stereo L&R 10Hz to 50KHz 0.005% 100dBu
Stereo Subwoofer 10Hz to 50KHz 0.005% 100dBu
NB: measured with volume at position 24
at: http://www.binarynow.com/
2 of 2 27/10/2010 10:05 p.m.
Loading...