Meridian Audio 502 Brochure

Background

Meridian has established a strong reputation for preamps. The Meridian 502 is by far the highest specification and best sounding preamp from this distinguished high-end company.

Meridian 502

The 502 has been designed as a reference quality partner to the 557 and 505 Power Amplifiers, which also feature balanced operation and dual-mono construction. This preamp is ready to receive balanced inputs from Meridian’s 588 CD Player or 566 D–A Converter and when used with 557, 505 or a Meridian Active Loudspeaker, it completes a fully balanced analogue system.

Balanced operation has always been used in professional audio because it can bring very substantial improvements in dynamic range by reducing inadvertent system noise from cabling or ground-loops. In a music system, balanced operation guarantees that the very best sonics are obtained from a combination of components.

The 502 brings the very best sonic and musical results to an all-analogue hi-fi. Seven sources can be controlled – four connected as unbalanced on phono, the other three provide fully balanced operation with XLR inputs.

502 provides balanced (XLR) and unbalanced outputs so it can be used with either balanced or single-ended power amplifiers or active speakers. A balanced tape output is also provided to allow sophisticated connection for ‘Pro’ recorders and processors or balanced operation in a two-room setup.

502 is constructed in a dual-mono format; there are separate isolated printed circuits for the left and right channels. Each channel has its own highperformance power supply which employs linear techniques, massive storage with audiophile-grade capacitors and multiple ultra-low-noise linear active regulation.

No expense has been spared in the construction – the 502 uses very high quality components including high-grade gold-plated connectors, Nichicon and polypropylene audio-grade capacitors, ultra-linear amplifier stages, four-layer PCB construction and a low-flux toroidal transformer. For vinyl lovers, two ultrahigh-end mono phono modules can be fitted as an option (one for each channel).

Preamps that integrate analogue audio systems need to have a wide range of operating levels and gains. The 502 has enormous overload capacity and will accept and deliv er over 4V rms single-ended (8V rms balanced). The gain setting allows a ±12dB variation; this gain setting is user-adjustable for each input and automatically remembered by the preamp. Like all the Meridian 500 Series, 502 has full remote capability and it can control a Meridian system when used with the MSR system remote. The on-board controller also has RS232 access for sophisticated system integration and computer control.

502

Analogue Controller

Sales information 1st December 2001

• Completes a fully balanced

analogue system when used with 500 Series amps or Meridian Active Loudspeakers

• Constructed in dual-mono to

match the 557 power amp

• Two tape outputs

• User adjustable sensitivity

• Phono option with MC or MM

plug-in modules for each channel

• Large low-field ultra-linear

power supply

Meridian Audio Limited

Stonehill, Stukeley Meadows Huntingdon Cambridgeshire PE29 6EX

T +44 (0) 1480 445678 F +44 (0) 1480 445686

Meridian America Inc.

Suite 122, Building 2400 3800 Camp Creek Parkway Atlanta GA 30331

T (404) 344 7111 F (404) 346 7111

www.meridian-audio.com

Technical Specification

Distortion: Less than 0.01% input to output. Signal/Noise: Better than –96dB CCIR (1V output, normal input) Less than –70dB for MM input and –60dB for MC. MM option: Sensitivity adjustable 0.5–17mV for 5cm/s @1kHz. Overload

point 47mV @ 1kHz. Cartridge load 47k ohms + 100pF.

MC option: Sensitivity adjustable 38–1200µV for 5cm/s @1kHz.

Cartridge load 220 ohms + 10nF.

Inputs: 4 unbalanced on phono, 27–840mV rms (impedance 20k

ohms). 3 balanced on XLR, 27–840mV rms (impedance 20k ohms). Outputs: 1 unbalanced on phono, 1.4–3V rms (impedance 47 ohms). 1 balanced output on XLR, 1.4–3V rms (impedance 47 ohms).

Tape outputs: Two unbalanced 1.5V rms (impedance 47 ohms). Construction: Two-channel dual-mono construction.

High-grade components used throughout. Phono option with new moving-coil or magnetic plug-in

modules for each channel. Large low-field ultra-linear power supply. Black textured enamel and glass finish. Dimensions: 88mm (3.46in) H, 321 (12.64) W, 332 (13.07) D.

Weight 5kg (10lbs). Controls: Front panel controls for Source, Copy, Mute, Display, Volume

up/down, Off. Volume control: 99 steps of 1dB with balanced

mode. Remote control, Meridian 500-Comms and RS232 operation Two Room Plus compatible.

Front display: 8-character dot -matrix LED display.

502