Page 1
Pre-assembly:
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware
(A)x1 (B)x1
(C)x1Lx1R
(D)x1
Hardware Pack
(E)x10
(F)x10
1
A
Open the bottom cover, loosely attach the seat cushion(B)
to the back cushion (A) use the bolt (E) , big flat washers
(J) and lock washer (F) .Loosely tighten with an Allen key (H).
3
C
B
1-2
B
F
J
E
H
1-1
H
E
J
F
D
A
2
Using bolt(E), big flat washers (J)and lock washer (F), connect
arm(C) to back cushion(A). Loosely tighten with an Allen key (H)
H
E
J
F
A
C
4
F
H
J
E
D
H
J
E
C
B
(G)x4
(I)x8 (J)x10
(H)x1
lnsert front stretcher (D) to left arm(C) with bolt.And then using
bolt(E), big flat washers (J) and lock washer (F) connect arm
(C)to back cushion (A).Loosely tighten with an Allen key (H).
5
G
Attach the wool spacer to the bottom of the chair leg
G
Attach right arm and left arm (C)to the frontstretcher(D),
using bolts(E), .big flat washers(J) and lock washer (F).
Securely tighten all bolts by Allen wrench (H)
6
I
Securely tighten all bolts by Allen wrench (H). Attach wooden
plugs (g) toeach bolt hole, tighten withrubber hammer to knock
the wooden plug till its tighten. Note: use a soft cloth between
the wooden plug andhammer to prevent damage to wooden
plug finish. ent damage to the surface of the cork. The
assembly is comple
te.
WAR NI NG :
Beware of Small parts and sharp edges.
Care Instructions
Lightly wipe or dust the surface with a dry soft cloth. Window cleaners, scrub cleaners, cleaning abrasives and alcohol
solvent could damage the protective coating and paint of the product.
Customer Service
Questions ragarding the product, please contact customer service and have the model number ready.
(213)-281-8796 hello@archiology.design www.archiology.design
CAMERON
Accent Chair
AC-A0001
AC-A0002
AC-A0003
AC-A0004
AC-A0059
Loading...