Mercury Row W007836203 Owner Manual

Page 1
WARRANTY
We strive to offer high-quality products, and we also try our
best to satisfy each and every customer that orders from us with
product or service as needed. We provide 30 days warranty
starting from the time you receive the item. Each customer must
item receipt for any items that are out of the warranty period
you may also still receive replacement parts by purchasing them
with our company if they are available.
Are you having difficulty
with assembly? Missing parts?
Please send email with your order No.
For return, Please check the return policy with
the retailer or MarketPlace you bought from.
Appreciated your purchasing from us.
Pop up your life by our furniture piece!
NOTE:
This brochure contains IMPORTANT safty info. Please read and keep for future reference.
Page 2
MAINTAINANCE
PARTS
AND WARNING
Keep furniture away from heat. Do not clean furniture with harsh cleansers or polish. Do not use detergents, Solvents, abrasives, spray packs or leather cleaner. Use non-color mild soap with warm water clean spills(Mix 1:10 soap to water) Do not place furniture under direct sunlight, material will possibly fade over time. Do not use on site dry Cleaning machine. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. Not for commercial use, For residential use only.
LIST
A: X1
E: X1
I: X1 J: X2
F: X1
B: X1
G: X1
K: X1
C: X1
L: X1
D: X1
H: X2
M: X1
Weight Limitation
110LBS
N: X1 O: X1 P: X1
Q : X3
Page 3
A
J
K
L
C
O
Q
N
H
M
G
E
I
F
H
D
B
Q
P
Q
J
OVERVIEW
Page 4
HARDWARE
ASSEMBLY
LIST
: X10
M6*35mm
: X28
: X1
SPARE
: X1
: X28
21mm
: X12
M3*12mm
: X31
8*30mm
: X4
8*1-1/4
: X1 : X1
: X28
INSTRUCTIONS
E&F
②-1
②-1
: X1
M6*30mm
: X1
21mm
: X1
M3*12mm
: X1
8*30mm
: X1
8*1-1/4
: X1
: X1
Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment.
②-2
STEP 1: Attach the female drawer slide to the panel E & F as the picture show. First, Separate drawer slides # to female slide# -1 and male slide#-2. Next, align the hole on the female drawer slide#-1 with the pre-drilled screw hole on the panel E & F. Make sure the hole position same as picture show. Tighten the screw# by screwdriver#.
Page 5
G
E
F
C&D
STEP 2: Connect the panel G with panel E & F. Insert the panel E and F into the panel G according the groove.
STEP 3: Preparation panel C and D. Screw in the cam bolt # into the pre-drilled screw hole by screwdriver#; Insert the wooden dowel# Make sure find right position as the picture show.
into the predrilled hole by hand.
Page 6
Q
Q
C
E
G
F
D
B
P
B
Q
STEP 4: Attach the panel C/D to the finished parts in step 2. Align the hole on the panel G to the cam bolt# and wooden dowel# tighten the nut# by screwdriver#10. last, use the sticker# to cover the screw hole to make them look nice.
on the panel C/D, insert them and
STEP 5: Preparation for panel B. 5-1, Insert the wooden dowel # into the predrilled hole on panel B, then align the wooden dowel hole on the panel Q to attach the panel Q to panel B. 5-2, Tighten the screw# by allenkey# as the picture show.
Page 7
A
&
B
STEP 6: Preparation for panel A & B. Insert the wooden dowel# into the predrilled hole on panel A/B as the picture show. Screw in the cam bolt# into the hole in panel A and B as the picture show.
C
E
G
F
B
STEP 7: Attach the panel B to the finished part in step 4. Align the hole on the panel C/D to the cam bolt# and wooden dowel# on the panel B, insert them and tighten the nut# by screwdriver#. last, use the sticker# to cover the screw hole to make them look nice.
D
Page 8
C
H
C
H
E
G
A
N
O
L
M
I
D
H
F
O
L
STEP 8: Attach the panel A to the finished part in step
7. Align the hole on the panel C/D to the cam bolt# and wooden dowel# on the panel A, insert them and tighten the nut# by screwdriver#10. last, use the sticker# to cover the screw hole to make them look nice.
STEP 9:Preparation for drawers. Insert the wooden dowel # into panel N as the picture show, then attach the panel L/M to panel N, slide in the panel O through the grooves on panel L/ M/N. Last, tighten the screw# by screwdriver# as the picture show.
Page 9
N
M
L
N
O
M
K
K
K
L
O
K
②-2
STEP10:Preparation for drawer. Screw in the cam bolt#and wooden dowel#
into the panel K as picture show. Connect the panel K to the finished part in step
9. Align the hole on the panel L/M to the cam bolt #and wooden dowel#, tighten the nut# by screwdriver# as the picture show.
STEP11: Attach the male slider -2 to the drawer sides. Align the hole on the male slider -2 to the screw hole on the side of panel L/M. tighten the screw # by screwdriver#.
Page 10
J
J
J
STEP12: Assemble the drawer to the cabinet. Carefully align male#
slides then insert the drawers gradually. drawers not aligned properly, loose the screw on male slides and make slightly adjustment to set the drawer leveled and even gap around drawer fronts.
- 2 and female #
- 1 drawer
If the
J
STEP 13:13-1Press down the pin on top of the sliding doorplace the wheel to track on bottom panel, then carefully align the door with track under top.
Page 11
J
J
J
J
STEP 13:13-2 hold the whole door on track. Try to slide the door and see if the door siting correctly on track and make slightly adjustment if the drawers not align.
Press the button on back of the latch to release the pin in order to
STEP 14:Assemble the anti-collapse set to keep safe.
Use philips head screwdriver to adjust the height of wheel in order to slide the door smoothly.
Loading...