Page 1
ASSEMBLY INSTRUCTIONS
Description: Square Night Stand End Table Product
Dimension: 19.7"Wx15.7"Dx23.5"H
Cube Size : 26.3”x17.5”x11”
NW : 22 LBS
GW : 24.2 LBS
Square Night Stand End Table
- 1 -
Page 2
BEFORE ASSEMBLY
Thank you for purchasing our product. This product has been designed for easy assembly and long lasting use. Please take
PART LIST
HARDWARE LIST
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Long bolt
(M6x35mm)
6
2
Allen Key
(4mm)
1
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
CHEST
1 B LEG
1
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and
count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware:
Square Night Stand End Table
- 2 -
Page 3
STEP 1
Attach Leg (B) to the Chest (A) by using bolts (1). Tighten with Allen Key (2).
A
1
2
ASSEMBLY IS COMPLETE
Square Night Stand End Table
- 3 -
Loading...