Page 1
Installation Manual
BEFORE BEGINNING
Carefully read the instructions before beginning the installation.
DANGER!
To avoid the risk of electrocution, please turn off the electricity mains before commencing the installation.
It is strongly recommended that this installation be performed by a professional electrician.
It is recommended that you wear safety glasses at all times during the installation.
A minimum of two people are needed to perform this installation
This product is wall mounted only
WARNING
To avoid the risk of electrocution, please turn off the electricity mains before commencing the installation.
We recommend the mirrors gets fitted by a qualified electrician.
MIRROR INSTALLATION
Level and mark the location. Measure the center of the holes and mark the drilling locations
ensure marking are leveled
Page 2
INSTALL SCREWS CONNECTING ELECTRICAL WIRING
Using a drill, make holes and fill with supplied plugs and screws.
Leave a gap of 2 - 3mm between the head of the screw and the wall.
Place the mirror against the wall and slide down as shown in image B
Loading...