Page 1
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
QUANTITY
PIECE1XDESCRIPTION
Flat washer
Allen bolt(M6x25 mm)
Allen key
Allen bolt(M6x35 mm)
Bench left frame
Bench back frame
Bench seat frame
Bench front frame
Bench right frame
Bench seat cushion
Bench back cushion
Corner right frame
Corner back frame
Corner seat frame
Corner front frame
Corner left frame
Corner seat cushion
Corner back cushion
PICTURE
1X
1X
1X
1X
2X
2X
1X
1X
1X
1X
1X
1X
1X
32X
14X
8X
30X
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
E
Product Dimensions:
51.96"x26.77"x25.98" H (Bench)
26.77"x26.77"x25.98" H (Corner)
26.77"x26.77"x13.97" H (Table)
26.77"x26.77"x13.97" H (Stool)
Weight Capacity : 275 Lbs (single seat)
550 Lbs (towperson seat)
Warning : Do not stand on chair
Warning : Do not over torque bolts/screws
Plastic feet
2
X
1-4
Page 2
Part List and Hardware List
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
QUANTITY
PIECE1XDESCRIPTION
Flat washer
Allen bolt(M6x25 mm)
Allen key
Allen bolt(M6x35 mm)
Bench left frame
Bench back frame
Bench seat frame
Bench front frame
Front right frame
Bench seat cushion
Bench back cushion
PICTURE
1X
1X
1X
1X
1
2
3
4
5
6
7
A
B
C
D
E
Plastic feet
2X
2X
17X
8X
4X
7X
1
1X
Weight Capacity : 275
Warning : Do not stand on
Lbs (single seat)
550 Lbs (towperson seat)
Bench
Warning : Do not over torque bolts/screws
4
2-
Page 3
2
3
1
5
4
1 2
3
4
B
B
B
B
A
A
A
A
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
Step 1
Connect Bench Back Frame (2) & Bench Seat Frame (3) & tighten
Bolt (B) with Allen key (E)
Step 2
Connect part from Step 1 & Left Frame (1) tighten Bolt (B)
with Allen key (E)
Step 3
Connect part from Step 2 & Front Right Frame (5) tighten Bolt (A)
with Allen key (E)
D
D
D
D
D
A
D
D
A
D
D
D
D
Step 4
Connect part from Step 3 & Bench Front Frame (4) tighten Bolt (A) with
Allen key (E)
3-4
Page 4
6
7
5
6
A
A
A
6
Step 5
Puton Bench Cushion (6) & Bench Back Cushion (7) to complete Bench
C
C
A
C
C
Step 4
Connect part from Step 4 & Plastic Feet (C) tighten Bolt (A) with
Allen key (E)
4-4
Loading...