Page 1
COMPUTER DESK
ASSEMBLY INSTRUCTION
Page 1 of 7
Page 2
A B
ASSEMBLY INSTRUCTION
Page 2 of 7
TOP BOARD
1PC
LEFT BOARD
C D
RIGHT BOARD
1PC
LEFT MIDDLE BOARD
E F
RIGHT MIDDLE BOARD
G
BOTTOM BOARD
1PC
1PC
BACK BOARD
H
DRAWER FRONT PANEL
1PC
1PC
1PC
2PCS
I J
DRAWER LEFT PANEL
K L
DRAWER BACK PANEL
2PCS
2PCS
DRAWER RIGHT PANEL
DRAWER BOTTOM PANEL
2PCS
2PCS
Page 3
M N
ASSEMBLY INSTRUCTION
Page 3 of 7
ITEM :
SUPPORT CROSSBAR
O
LEFT FRAME
Q
DRAWER GLIDE
CAM BOLT
LARGE CAM LOCK
1PC
1PC
4PCS
SUPPRORT FRAME
P
RIGHT FRAME
1PC
1PC
12PCS
8PCS
SMALL CAM LOCK
LARGE WOOD DOWEL
SMALL WOOD DOWEL
CAP
SHORT SCREW
LONG SCREW
SHORT HANDLE SCREW
LONG HANDLE SCREW
SHORT BOLT
4PCS
8PCS
4PCS
4PCS
12PCS
20PCS
4PCS
2PCS
3PCS
MEDIUM BOLT
LONG BOLT
DOOR KNOB
9PCS
2PCS
2PCS
Page 4
GLUE
ASSEMBLY INSTRUCTION
Page 4 of 7
1PC
STEP 1
ALLEN WRENCH
4
1
1PC
1
1
4
1
A
4
1
1
1
4
1
You will need two people for this installation. And will take about fifty-five minutes.
STEP 1 :
1. Insert Cam Bolt (1) and Large Wood Dowel (4) to the Top Board (A).
STEP 2
C
2
2
F
E
D
2
2
B
STEP 2 :
1. Install Left/Right Board (B,C) and Left/Right Middle Board (D,E) onto the Top Board (A).
2. Insert Back Board (F) between Left Board (B) and Right Board (C) along slots.
3. Install Large Cam Lock (2) to the Left/Right Board (B,C) and Left/Right Middle Board (D,E) tighten
with screw driver (not included).
Page 5
STEP 3
ASSEMBLY INSTRUCTION
Page 5 of 7
Q
Q
7
Q
Q
7
STEP 3 :
1. Attach Drawer Glide (Q) to the Left/Right Board (B,C) and Left/Right Middle Board (D,E) by using
Short Screw (7) tighten with allen wrench.
STEP 4
8
8
8
8
8
8
8
G
8
8
8
8
8
STEP 4 :
1. Attach Bottom Board (G) to the assembled piece from step 3 by using Long screw (8) tighten with allen
wrench.
Page 6
STEP 5
ASSEMBLY INSTRUCTION
Page 6 of 7
8
3
14
I
1
5
10
H
L
1
5
K
8
J
3
STEP 5 :
1. Attach Drawer Left/Right Panel (I,J) to Drawer Back Panel (K) by using Long Screw (8).
2. Insert Drawer Bottom Panel (L) between Drawer Left Panel (I) and Drawer Right Panel (J) along slots.
3. Insert Cam Bolt (1) and Small Wood Dowel (5) to the Drawer Front Panel (H).
4. Attach Door Knob (14) to Drawer Front Panel (H) by using Long Handle Screw (10).
5. Attach Drawer Front Panel (H) to Drawer Left/Right Panel (I,J) by using Small Cam Lock (3) tighten
with screw driver (not included).
6. Repeat for the remaining drawer.
STEP 6
STEP 6 :
1. Insert Cap (6) into the hole at the Left/Right Frame (O,P).
2. Attach Support Crossbar (M) and Support Frame (N) to Left/Right Frame (O,P) by using
Medium Bolt (12) and Long Bolt (13) tighten with allen wrench.
3. Attach the assembled piece from step 6-2 to the assembled piece from step 5 by using Short Bolt (11) and
Medium Bolt (12) tighten with allen wrench.
Page 7
STEP 7
ASSEMBLY INSTRUCTION
Page 7 of 7
9
9
9
Q
STEP 7 :
1. Attach Drawer Glide (Q) to the assembled piece from step 6 by using Short Handle Screw (9).
9
9
Q
FINISH
Loading...