Page 1
Outdoor Wicker Sofa
Page 2
PART LIST
A
Arm Panel
2 PCS
F
Core of Seat
Cushion
3 PCS
B
Back Panel
1 PC
G
Cover of Back
Cushion *
3 PCS
C
Seat Panel
1 PC
H
Core of Back
Cushion
3 PCS
D
Lower Front
1 PC
*Please note cushion covers will
ship separately.
E
Cover of Seat
Cushion *
3 PCS
HARDWARE LIST
#1 #2 #3 #4 #5
M6*25mm M6*40mm M6*50mm
Short Bolt
3 PCS
#6
M6mm M6mm
Wrench
1 PC
#7 #8
Medium Bolt
4 PCS
Allen Key
1 PC
Long Bolt
11 PCS
Adjustable Leveler
6 PCS
M6mm M6mm
Nut
15 PCS
Washer
33 PCS
2
Page 3
EXTRA HARDWARE LIST
#1
M6*30mm M6*40mm M6*50mm
Short Bolt
1 PC
#2 #3 #4 #5
Medium Bo
1 PC
lt
Long Bo
#8
M6mm
Adjustable
Leveler
2 PCS
3 PCS
M6mm
lt
Nut
3 PCS
M6mm
Washer
3 PCS
3
Page 4
Step 1.
Lay arm panel (part A) down on a soft flat surface,such as carpet,as shown
below.Attach back panel
(part #2),washers (part #5),nuts (part #4),wrench (part #6) and allen key
key (part #7).
NOTE: Please do not fully tighten bolts until unit is fully
(part B) to arm panel (part A) using medium bolts
assembled.
#7
#2
#5
B
#5
#4
A
#6
Step 2.
#2
#4
#5
Attach seat panel (part C) to arm panel (part A) and back panel (part B) using
long bolts (part #3),washers (part #5),nuts (part #4),wrench (part #6) and
allen key (part #7).
NOTE: Please do not fully tighten bolts until unit is fully
assembled.
X2
X2
X4
#7
#3
#5
C
B
A
#5
#4
#6
#3
#4
#5
4
X5
X5
X10
Page 5
Step 3.
Attach lower front (part D) to arm panel (part A) and seat panel (part C) using
short bolts (part #1),long bolts (part #3),washers (part #5),nuts (part #4),
wrench (part #6) and allen key (part #7).
NOTE: Please do not fully tighten bolts until unit is fully
#7
#1
#7
#5
D
C
#5
#3
A
#5
#4
#6
assembled.
B
#1
#3
#4
#5
X3
X2
X2
X7
Step 4.
Attach arm panel (part A) to assembled unit (parts A,B,C&D) using medium
bolts (part #2),long bolts (part #3),washers (part #5),nuts (part #4)
wrench (part #6) and allen key (part #7) as shown.
NOTE: Please fully tighten all bolts at this time.
#6
#4
#6
#4
#5
A
#5
D
#5
#2
#7
#2
X2
#5
#3
#7
C
B
A
#3
#4
#5
5
X4
X6
X12
Page 6
Step 5.
Screw adjustable levelers (part #8) to desired position in the pre-drilled
holes on the bottom of the sofa where shown.
Step 6.
Insert core of seat cushion (part F) into cover of seat cushion (part E).
Insert core of back cushion (part H) into cover of back cushion (part G).
F
H
E
G
6
Page 7
Step 7.
Carefully turn the assembled sofa upright and add cushions as shown below.
7
Loading...