Page 1
P.1
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts.
Page 2
General Assembly Guidelines
P.2
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
21
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product .
VII. Power tools should not be used to assemble this product.
VIII. Drill may be needed for securing product to wall.
Page 3
P.3
Parts List
1
3
7
6
5
4
11
10
8
x 3
9
13
12
14
x 4
15
15
2
15
15
Page 4
P.4
Hardware List
Ø8x30mm Wooden dowelA 26 pcs
Ø6x35mm Cam boltB 38 pcs
Ø15x11mm Cam lockC 18 pcs
D
E
F
G
H
J
K
L
M
N
P
Ø15x9mm Cam lock 20 pcs
Ø30mm Sticker
Ø3x12mm Screw 48 pcs
Ø6x50mm Screw
Ø5x15mm Screw
Ø6x35mm Bolt 1 pc
Ø6x12mm Bolt 16 pcs
M 4
Ø4x22mm
Ø4x38mm
Hex key
Handle
Handle Bolt
Screw
38 pcs
6 pcs
4 pcs
1 pc
8 pcs
16 pcs
20 pcs
Q
R
S
T
U
V
Ø4x12mm
Ø4x25mm
Ø6x30mm Wooden dowel
10''
Screw
Screw
Plastic strap
Nut
Drawer slider 4 sets
* Note: This piece comes preassembled for
shipping purposes and must be disassembled
to complete the desk assembly.
Glue tube 2 pcsW
1 pc
1 pc
1 pc
1 pc
8 pcs
Philips head screwdriver required for assembly
(not included)
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Page 5
P.5
Step 1
Insert wooden dowel (A) into parts (5,6,8) and wooden dowel (U) into part (11) as per diagram.
U
11
U
x 4
A
8
A
x 3
A
A
A
5
A
A
A
A
A
A
A
6
A
A
Page 6
P.6
Step 2
Insert wooden dowel (A) into parts (4,7), then secure cam bolt (B) into parts (1,4,7) with Philips
head screwdriver as per diagram.
A
B
B
B
B
B
1
A
B
B
B
4
B
B
B
B
B
B
A
A
B
7
B
B
A
B
A
A
A
Page 7
Step 3
P.7
Pick up the slider arm (V) and separate the slide runner for the following Steps. Extend
the slide runner all the way forward,press the plastic release lever of the slider arm up
and pull the slide runner complete out .
Slider arm
Slider arm
Slider bracket
V
Slider bracket
V
Page 8
Step 4
P.8
Using screw (F) attach drawer slider (V) into parts (10,13) with Philips head screwdriver
as per diagram.
F
V
10
F
F
F
F
F
V
13
x 4
Page 9
Step 5
P.9
Using screw (F) attach drawer slider (V) into parts (4,7) with Philips head screwdriver
as per diagram.
F
F
V
V
7
V
V
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
V
V
4
V
V
Page 10
Step 6
P.10
Attach part (6) to part (5) as per diagram.
5
6
Page 11
P.11
Step 7
Using Cam lock(C) secure part (5) to part (4) with Philips head screwdriver as per diagram.
21 3
C
4
C
5
C
Page 12
P.12
Step 8
Using Cam lock(C) secure part (8) to part (4) ,then using screw (H) attach part (3) to part (4) with
Philips head screwdriver as per diagram.
H
21 3
C
C
C
8
4
8
8
3
Page 13
Step 9
P.13
Using Cam lock(C) secure parts (6,8) to part (7) ,then using screw (H) attach part (3) to part (7) with
Philips head screwdriver as per diagram.
21 3
H
C
3
8
C
8
C
C
7
8
6
C
C
Page 14
Step 10
P.14
Using screw (G) attach part (2) to parts (4,5,6,7) with Hex key (L) as per diagram.
7
6
4
5
2
G
G
G
G
L
G
Page 15
Step 11
P.15
Using bolt (K) attach part (15) to part (2) with Hex key (L) as per diagram.
15
2
15
15
K
15
L
Page 16
Step 12
P.16
Using cam lock (C) secure part (1) into parts (4,5,6,7) with Philips head screwdriver ,then using
bolt (J) attach part (3) to part (1) with Hex key (L) as per diagram.
21 3
1
6
5
C
C
4
C
C
7
1
3
J
L
Page 17
Step 13
P.17
Secure cam bolt (B) into part (14) ,then using handle bolt (N) secure handle (M) to part (14) with
Philips head screwdriver as per diagram.
M
M
B
N
N
B
14
N
N
B
B
x 4
B
Page 18
Step 14
P.18
Using screw (P) attach parts (10,13) to part (9) with Philips head screwdriver, then put part (12)
as per diagram.
10
13
P
9
P
12
9
10
13
x 4
Page 19
Step 15
P.19
Using screw (P) attach part (11) to part (9) , then using Cam lock (D) attach part (14) to
parts (10,11,13) with Philips head screwdriver as per diagram.
11
21 3
D
D
14
11
P
9
D
10
13
x 4
Page 20
Step 16
P.20
Place sticker (E) cover the holes as per diagram .
x 4
E
E
E
E
E
Page 21
Slider bracket
Slider arm
Step 17
P.21
Insert the assembled drawers into the unit frame, extend the Ball Bearing Slide Tracks (V) on the
pedestal Side Panel all the way forward .Then align the Slide Runners on the assembled drawers
with the Slide Tracks and push the drawer carefully inside until it stops. Note : if the drawer does
not go in smoothly, please take it out and repeat the step. If you need to remove the drawer, please
pull the drawer all the way out,press or lift the plastic release lever and pull out the drawer and then
re-assembled the drawer until it was going in smoothly .
OR
V
Page 22
Step 18
P.22
Position the assembled unit at the desired location ,if necessary adjust the floor leveler at the
bottom of the leg to level the unit .
Page 23
Step 19
P.23
Using screw (Q) attach plastic strap (S) into part (1) with Philips head screwdriver as per diagram.
1
S
Q
Page 24
P.24
21 3
Using screw (R) attach plastic strap (S) into Nut (T) to wall with Philips head screwdriver
as per diagram.
Step 20
WARNING
Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend
that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure
hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
Wall
T
R
S
Page 25
Step 21
P.25
Final Assembly
Loading...