Page 1
ASSEMBLY INSTRUCTIONS
175 Southbelt Industrial Drive,
Houston, TX 77047
Email: info@eastwestfurniture.net
Description
Dimension : 24”.W x 16.5”.D x 35”.H
: Chair Wood Seat
Cube Size : 47.2” x 19.1” x 11.4”
Chair Wood Seat
- 1 -
NW: 20 LBS
GW: 30 LBS
Page 2
BEFORE ASSEMBLY
ASSEMBLY TOOLS REQUIRED
Than
k you for purchasing this quality product. This product has been designed for easy assembly and constructed
for durability. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during
shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all
parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
Remove all wrapping material, including staples & packing straps before you start to assemble.
-
- DO NOT tighten all screws and bolts until completely assembled.
-
Keep all hardware parts out of reach of children.
NOT INCLUDED
PART LIST
When
unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make
sure you have the following parts:
NO
A
Description
Chair 1
Qty Sketch
STEP 1
Open and close the chair follow direction of arrows as shown below.
Chair Wood Seat
- 2 -
Loading...