Page 1
ASSEMBLY INSTRUCTION
Table Top
1pc
Table Leg
4pcs
Jcbc Bolt
M8 x 80mm
Spring Washer
M8
8 pcs
8 pcs
8 pcs 1 pc
This page lists all the contents included in the
box. Please take the time to identify the
hardware as well as the individual components
to this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
Flat Washer
M8 x 22mm
Allen Key
M8 x 60
36" COUNTER HEIGHT TABLE
Page 2
Put the Table Top (A) upside down on the soft and smooth surface. Attach Table Leg (B)
onto Table Top (A).Then insert Jcbc Bolt (C), Spring Washer (D) and Flat Washer (E) into
holes of each corner block of Table Top (A), by using Allen Key (F).
***Do not fully tighten the nut or bolts until all nuts and bolts are attached.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface
with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are tight.
Stand table up on an even surface and check that it is balanced. If there is a slight wobble, apply
downward pressure in the corner where a leg is uneven. Keeping pressure in that corner, tighten all
bolts. If balanced, apply downward pressure evenly in the center and tighten all bolts. Do not
over-tighten beyond hole depth.
Loading...