Page 1
ASSEMBLY INSTRUCTIONS
ATTENTION:
1. Please read these instructions carefully before assembly.
2. Since aluminum is soft metal over tightening may strip thread or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for proper assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe
and proper assembly.
Parts list Parts picture Description
A
B
C
C1
C2
C3
J
K
L
V
Table top
Base
Center tray
HANDLE
GAS FRIEPIT
Gas bottle holder
Foot leveler
Wheel
Wheel
Door
Glass bead
Q'ty
1
1
1
2
Parts list Parts picture Description
D
E
F
G
1
1
Factory
already
assembled
H
1
I
1
Made in China
(M8*35)
(M8)
(M8)
(M8)
Bolt
Flat washer
Lock washer
Nut
Nut cap
Wrench
Q'ty
4
4
4
4
4
1
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
NO POWER TOOLS
*
Page 2
ASSEMBLY INSTRUCTIONS
Assembly steps:
1.Loosely attach the base (B)to the table top(A) with bolts(D),flat washers(E),lock washers(F),
nuts(G)and nut caps(H).
2.Turn the table onto its legs and put glass beads(V) into the gas firepit basin.
3.When you keep the fire pit free, you can put the center tray(C) on the table top.
Warning : Do not use acid or alkaline washing liquid to clean the product.
11
V
11
33
H
G
D
22
11
F
E
C
A
B
Note: it needs to be put basin to the left or right 30°.
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
Made in China
*
NO POWER TOOLS
Loading...