Page 1
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
Weight Capacity: 550 lbs
Warning : Do not stand on bench
Warning : Do not over torque bolts/ screws
PIECE DESCRIPTION PICTURE
A
B
C
D
HW1
HW2
Seat Frame
Leg
Cushion Back
Cushion Seat
Socket screw 6 x 0.5 x 15 mm
Allen key
QUANTITY
1X
4X
2X
1X
16X
1X
Model# PAT7519
Product Dimensions:52.76" W x 27.17" D x 28.74" H
Page 2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
1
HW1
HW2
HW1
2
HW1
HW1
HW2
HW1
Step 1
Attach Leg (B) to Seat Frame (A). Use Bolt (HW1) tighten with
Allen Key (HW2).
Step 2
Like step 1 using Leg (B) is inserted into the Seat Frame (A). Use Bolt
(HW1) tighten with Allen Key (HW2).
Page 3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
3
4
Step 3
Put Back Cushion (C) and Seat Cushion (D) on the
Bench. The Bench is ready to be used.
Step 4
Caution: This Bench can only be used on a flat, level surface
Page 4
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove furniture from standing water. Dust regularly with small brush or vacuum
Wicker
Spills should be taken care of immediately before they harden or
stain
with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
Weight Capacity: 275 lbs
Warning : Do not stand on chair
Warning : Do not over torque bolts/ screws
PIECE DESCRIPTION PICTURE
E
B
F
G
HW1
HW2
Seat Frame
Leg
Cushion Back
Cushion Seat
Socket screw 6 x 0.5 x 15 mm
Allen key
QUANTITY
1X
4X
1X
1X
16X
1X
Model# PAT7519
Product Dimensions:25.2" W x 27.17" D x 28.74" H
Page 5
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
1
E
HW1
HW1
HW2
2
E
HW1
HW1
HW2
HW1
Step 1
Attach Leg (B) to Seat Frame (E). Use Bolt (HW1) tighten with
Allen Key (HW2).
Step 2
Like step 1 using Leg (B) is inserted into the Seat Frame (E). Use Bolt
(HW1) tighten with Allen Key (HW2).
Page 6
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
3
4
F
G
Step 3
Put Back Cushion (F) and Seat Cushion (G) on the
Chair. The Chair is ready to be used.
Step 4
Caution: This Chair can only be used on a flat, level surface
Page 7
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
Weight Capacity: 40 lbs
Warning : Do not stand on table
Warning : Do not over torque bolts/ screws
PIECE DESCRIPTION PICTURE
H
I
K
HW1
HW2
Socket screw 6 x 0.5 x 15 mm
Table Top
Leg
Glass table 1X
Allen key
QUANTITY
1X
4X
16X
1X
Model# PAT7519
Product Dimensions:23.62 W x 39.37" D x 14.96" H
Page 8
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
1
HW1
I
I
HW1
HW1
2
I
I
K
I
HW2
H
HW1
Step 1
Attach Leg (I) to Table Top (H). Use Bolt (HW1) tighten with
Allen Key (HW2).
Step 2
Put on Table glass (K) to complete Table
Caution : This Table can only be used on a flat, level surface.
Loading...