Page 1
Kitchen Cart
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Base
1 pc.
B.
Front Rail
1 pc.
C.
Back Rail
1 pc.
D.
Back Rail
1 pc.
E.
Shelf
4 pcs.
F.
Support
2 pcs.
G.
Side Panel
1 pc.
K.
Back Upright
1 pc.
P.
Drawer
1 pc.
H.
Middle Panel
1 pc.
L.
Back Upright
1 pc.
I.
Middle Panel
1 pc.
M.
Back Panel
3 pcs.
Q.
Drawer
3 pcs.
N.
Door
1 pc.
J.
Side Panel
1 pc.
O.
Door
1 pc.
Refer to later page(s) of these instructions for drawer assembly.
Tool(s) required for assembly: Phillips screwdriver
Page 2
Hardware List
Assembly Instructions 2/10
Hex Wrench
1 pc.
Cam Lock Screw
15 pcs. (+1 extra)
M6x20
Head Cap Bolt (short)
20 pcs. (+1 extra)
Small Hex Wrench
1 pc.
Cam Lock
15 pcs. (+2 extra)
M6x30
Head Cap Bolt
10 pcs. (+1 extra)
Locking Caster
2 pcs.
Flat Washer
16 pcs. (+1 extra)
M3.5x15
Wood Screw (short)
40 pcs. (+1 extra)
Non-Locking Caster
2 pcs.
Spring Washer
16 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
32 pcs. (+1 extra)
Adjustable Pin
16 pcs. (+1 extra)
Towel Bar
2 pcs.
M4x25
Machine Screw
4 pcs.
Handle
6 pcs.
M4x35
Machine Screw (long)
8 pcs.
Hinge
4 pcs.
Page 3
Assembly Instructions 3/10
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into pre-drilled
holes in Back Rails (C), (D), Side Panels (G), (J)
and Back Uprights (K), (L) then tighten.
(See Figure 1)
C
D
K
G
J
L
Figure 1
Page 4
STEP 2
Attach Base (A) to Back Rail (D)
with Cam Locks. (See Figure 2)
Assembly Instructions 4/10
Cam Lock
A
D
Figure 2
STEP 3
Attach Back Uprights (K)
and (L) to Back Rail (C).
Attach Middle Panels (H) and (I)
to unit with Cam Locks.
Cam Lock
C
H
I
K
L
Page 5
Assembly Instructions 5/10
STEP 4
Slide Back Panels (M) into position.
Attach unit from Step 2 to unit
with Head Cap Bolts. (See Figure 3)
Head Cap Bolt
M
M
M
Figure 3
Head Cap Bolt
Head Cap Bolt (middle)
Cam Lock
STEP 5
Attach Front Rail (B) to unit
with Head Cap Bolts.
B
F
F
Attach Supports (F) to unit
with Cam Locks and
Head Cap Bolts (middle).
Page 6
STEP 6
Attach Side Panels (G)
and (J) to unit with Cam Locks
and Head Cap Bolts.
Head Cap Bolt
Assembly Instructions 6/10
Cam Lock
G
J
STEP 7
Attach Towel Bars to unit
with Head Cap Bolts (short).
Attach Casters to unit with
Flat Washers, Spring Washers
and Head Cap Bolts (short),
with Locking Casters at front,
tightening bolts only halfway.
(See Figure 4)
Tighten all Head Cap Bolts (short).
Towel Bar
Head Cap Bolt (short)
Figure 4
Locking Caster
Non-Locking Caster
Flat Washer
Spring Washer
Head Cap Bolt (short)
Page 7
Assembly Instructions 7/10
STEP 8
Attach Hinges to Doors (N) and (O)
with Wood Screws (short) into
pre-drilled holes, then tighten.
(See Figure 5)
Figure 5
N
Wood Screw (short)
Hinge
Wood Screw (short)
Hinge
O
Handle
Machine Screw
STEP 9
Attach Doors (N) and (O)
to unit with Wood Screws (short)
into pre-drilled holes, then tighten.
(See Figure 6)
Attach Handles to Doors (N)
and (O) with Machine Screws.
(See Figure 7)
Insert Adjustable Pins into
side panels and middle panels
at desired level.
Place Shelves (E) into position.
N
O
E
E
E
E
Figure 6 Figure 7
Adjustable Pin
Page 8
Drawer (P)
Assembly Instructions 8/10
Wood Screw (long)
Bottom
STEP 10
P3
P1
P2
Roller at back
STEP 11
Slide Drawer Bottom (P5) into groove.
Attach Drawer Bottom (P5) to
unit with Wood Screws (short).
Machine Screw (long)
Handle
Attach Drawer Front (P1) and
Drawer Back (P2) to Drawer Side (P3)
with Wood Screws (long).
P4
Attach Drawer Side (P4) to unit
with Wood Screws (long).
Wood Screw (short)
P5
Part List
P1.
Drawer Front
1 pc.
P2.
Drawer Back
1 pc.
P3.
Drawer Side
1 pc.
STEP 12
Attach Handle with Machine Screws (long).
P4.
Drawer Side
1 pc.
P5.
Drawer Bottom
1 pc.
Page 9
Drawer (Q)
Assembly Instructions 9/10
Wood Screw (long)
Bottom
STEP 13
P3
Q1
P2
Roller at back
STEP 14
Slide Drawer Bottom (P5) into groove.
Attach Drawer Bottom (P5) to
unit with Wood Screws (short).
Machine Screw (long)
Handle
Attach Drawer Front (Q1) and
Drawer Back (P2) to Drawer Side (P3)
with Wood Screws (long).
P4
Attach Drawer Side (P4) to unit
with Wood Screws (long).
Wood Screw (short)
P5
Part List
Q1.
Drawer Front
3 pcs.
P2.
Drawer Back
3 pcs.
P3.
Drawer Side
3 pcs.
STEP 15
Attach Handle with Machine Screws (long).
P4.
Drawer Side
3 pcs.
P5.
Drawer Bottom
3 pcs.
Page 10
Assembly Instructions 10/10
STEP 16
Attach Top (W) to unit with Head Cap Bolts (middle).
Slide Drawers (P) and (Q) into position.
Note: Supports (V) from 20 09100 Top carton are not used in this assembly.
W
Head Cap Bolt (middle)
P
Q
Q
Q
STEP 17
If needed, adjust doors up or down by removing the front Wood Screws (short) and
loosening slightly the back Wood Screws (short) from side panel, adjusting doors up
or down and re-installing screws. (See Figure 8).
If needed, adjust doors left to right. (See Figure 9)
If needed, adjust doors front to back. (See Figure 10)
Up
Down
Figure 8 Figure 9
Left
Right
Figure 10
Front
Back
Page 11
CARE INSTRUCTIONS
NEVER
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
Do not write
directly on surface.
PREVENT
MARKING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
CLEAN
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
We will provide replacements
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, we are under no obligation to provide replacement parts. Parts are not available for fully assembled items
nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
free of charge for missing or damaged hardware or parts within 30 days of
Loading...