Page 1
Wardrobe
Page 2
Page
Included in the package
01 - Base Panel = 01 piece (box 3/4)
02 - Left Side Panel = 01 piece (box 2/4)
03 - Left Partition Panel = 01 piece (box 2/4)
04 - Right Partition Panel = 01 piece (box 2/4)
05 - Right Side Panel = 01 piece (box 2/4)
06 - Front of the Drawer = 02 pieces (box 3/4)
07 - Left Side Panel of the Drawer = 02 pieces (box 4/4)
08 - Right Side Panel of the Drawer = 02 pieces (box 4/4)
09 - Rear Panel of the Drawer = 02 pieces (box 4/4)
10 - Base of the Drawer = 02 pieces (box 4/4)
11 - Top Panel = 01 piece (box 3/4)
12 - Smaller Crossbar = 02 pieces (box 4/4)
13 - Larger Crossbar = 02 pieces (box 3/4)
Wardrobe
14 - Smaller Partition = 01 piece
15 - Smaller Shelf = 01 piece (box 3/4)
16 - Larger Shelves = 03 pieces (box 4/4)
17 - Medium Shelf = 01 piece (box 3/4)
18 - Left Support of the Drawer’s Slide = 01 piece (box 4/4)
19 - Right Support of the Drawer’s Slide = 01 piece (box 4/4)
20 - Doors = 06 pieces (box 1/4)
21 - Smaller Back Panel= 01 piece (box 3/4)
22 - Larger Back Panel = 02 pieces (box 3/4)
23 - Smaller Aluminum Hanger Bar = 01 piece (box 3/4)
24 - Larger Aluminum Hanger Bar = 03 pieces (box 3/4)
25 - Handle = 06 pieces (box 3/4)
(box 3/4)
02
24
11
23
22
03
02
15
21
04
16
16
16
17
05
20
25
10
14
07
01
09
13
12
08
19
06
18
Page 3
Page
Included in the package
B = 46x C = 44x F = 28x
G = 28x H = 08x
Hardware (box 4/4)
D = 12x
I = 74x
J = 08x
Wardrobe
E = 08xA = 108x
K = 08x L = 08x
03
M = 22x
N = 08x P = 18x R = 02x
O = 28x
Tools needed
(not included)
Front view
Q = 02x
Phillips screw driver
Screw driver
11 lb
11 lb
S = 02x
Try square
11 lb
11 lb
15.4 lb
All the hanger
bars 15.4 lb.
Rear view
11 lb
11 lb
11 lb
Page 4
Page
Wardrobe
Attention!
The wardrobe must be assembled in the vertical position.
Step 01
C
N
C
02
C
N
C
05
Rear Side
Rear Side
Fix the hardware (H) onto the parts (02)
04
and (05) with the hardware (C ). Fix the
hardware (N) onto the parts
(02), (05), (04) and (14)
with the hardware (C).
Rear Side
C
N
C
C
N
C
C
N
C
04
H
C
H
C
C
C
H
CC
H
C
C
Step 02
Connect the part (12) onto the part (13)
with the hardwares (F + G).
*Observe the position of the
F
part 12, the indicated drill must
be to the up side!
F
G
12
13
G
F
F
G
G
F
F
G
12
G
G
F
F
G
12
Rear Side
14
Fix the hardware (H) onto the
part (13) with the
hardware (C).
13
G
F
F
G
C
13
H
C
C
H
C
C
13
H
C
H
C
C
Page 5
Page
Step 03
Connect the part (01) onto the part (12)
with the hardware (B).
B
Drill
12
B
Drill
Rear Side
B
Drill
12
Wardrobe
B
Drill
05
01
Step 04
Fix the hardware (N) onto the parts
(03) and (04) with the hardware (C).
Connect the part (16) onto the parts
(03) and (04) with the hardware (B).
C
N
C
N
03
C
C
Rear Side
04
B
Observe the
shoes position.
Connect the parts (03) and (04) onto the
part (01) with the hardware (F + G).
04
Rear Side
03
16
B
Rear Side
16
Rear Side
B
B
F
Rear Side
G
F
G
G
01
F
F
Page 6
Page
Step 05
Connect the part (05) onto the parts (01)
and (13) with the hardware (B + L).
*How to use the hardware B + L.
First, put the hardware L into the drill.
(pay attention to the position
of the hardware L)
After, connect the part (17) and (16)
onto the parts (04) and (05)
with the hardware (B).
Rear Side
Wardrobe
B
Rear Side
Rear Side
04
B
B
B
B
16
17
01
16
05
L
L
06
B
B
B
B
B
B
13
Rear Side
Step 06
Fix the hardware (N) onto
the parts (03) with
C
N
C
03
04
the hardware (C ).
Rear Side
Rear Side
Using the hardware (J) and the hardware
J
18
19
J
(E) connect the part (18) onto the
part (03) and the part (19)
J
J
J
E
E
E
E
E
E
E
E
J
J
J
onto the part (04).
*Observe the right position of
the parts (18) and (19).
Page 7
Page
Step 07
Connect the part (02) onto the parts (01)
and (13) with the hardware (B + L).
Rear Side
02
Rear Side
Wardrobe
Rear Side
07
Step 08
Connect the part (14) onto the part (01)
with the hardware (F + G).
Connect the part (15) onto the part (14)
with the hardware (F + G).
Connect the part (15) onto the
part (02) with the hardware (B).
B
B
B
Rear Side
B
B
B
Step 03
Rear Side
01
L
13
Rear Side
Rear Side
15
B
B
02
14
01
15
F
F
14
G
14
F
G
01
F
G
G
Page 8
Page
Step 09
First, apply the hardware F into the part 11.
F
F
F
11
F
After installed the hardware (F), turn the
part (11) upside down to proceed.
Connect the part (11) onto the
parts (03) and (04) with
the hardware (F + G).
B+L
02
B+L
Rear Side
11
03
Wardrobe
11
F
G
04
03
04
08
B+L
B+L
L
05
Connect the part (11) into the parts (02)
and (05) with the hardware (B + L).
Step 10
Connect the parts (23) and (24)
into the hardware (N).
02
Step 03
24
24
03
05
04
24
23
Page 9
Page
Step 11
Before starting the process, use a try square to
align the parts (22), (11), (05) or (02), after
connect the parts (22) with the hardware (I)
keeping the alignment, and
repeat the process on the
part (21).
22
Rear Side
22
21
11
05
02
I
22
Wardrobe
Connect the parts (21) and (22)
with the hardware (M) and (I).
M+I
Rear Side
22
21
09
Rear Side
Step 12
10
Rear Side
M
I
Step 03
Connect the parts (07), (08) and (09) with the hardware (B).
Apply the part (10)
in the groove of the
parts (07) and (08)
until the groove
of the part (09).
07
B
B
I
B
B
08
09
Page 10
Page
F
Step 13
06
F
F
Wardrobe
Connect the parts (07), (08) and (06)
using the hardware (F + G).
O
G
O
G
07
10
F
G
O
O
Use the hardware (C) with the
hardware (K) as shown
G
Step 14
on detail.
08
Step 03
06
K
K
C
Rear of the drawer
C
09
K
Observe that the hardware K + C
are applied in the parts 06 and 09.
K
C
C
awer
Front of the dr
Page 11
Page
Step 15
Install the drawer fitting it into
the slides fixed on the side
of parts (03) and (04).
Wardrobe
11
04
03
Apply the Stickers, hardware (O) onto the
hardware (G) and the hardware (L), all of them.
O
G
L
O
Page 12
Page
Attention! Tip-over System
Attention!
Before installing the tip-over system, it is mandatory
that the wardrobe be in the right place in the room.
C = 04x
First approach the wardrobe
as close as possible to the wall.
Q = 02x
R= 02x
Wardrobe
S = 02x
12
Using a pencil, mark where you should
drill the wall with a 3/8" drill bit
to put in the hardware (R).
11
Q
Wall
Page 13
Page
Attention! Tip-over System
*press the hardware wings (R) to put in the
hole that you drilled in the wall.
wings
R
Hardware (R), plugged in the wall.
Pass the hardware (S) through the
Q
hardware (Q) until the hardware (R)
Wardrobe
R
plugged in the wall.
wings
13
11
S
Be sure that the wardrobe is on the final position!
Then fix the hardware (Q) onto the part (11)
with the hardware (C).
C
Q
Wall
C
Q
Page 14
Page
Wardrobe
Door assembly and
adjustment
Attention!
Is the wardrobe in the right place?
If yes go ahead installing the doors.
14
20
P
A
A
edge
You must align the hardware (P)
parallel with the edge
of the door (20).
P
Fix the hardware (P) onto
A
P
align parallel
the part (20) with
the hardware (A).
A
A
A
P
A
A
P
A
A
Repeat the procedure on all the doors!
Page 15
Page
02
03
04
05
20
Wardrobe
Connect the part (20) onto
the parts (05), (04),
(03) and (02) with
the hardware (A).
Attention:
Fix the hardware (A)
in the indicated hinge hole.
P
A
A
15
Repeat the procedure to
install all the doors!
20
D
25
D
20
D
20
Use the screw (D) until it
pass through
the door from
inside to outside.
D
Repeat the procedure to
install all the handles!
Connect the part (25) onto
the part (20) with
the hardware (D).
Page 16
Page
Wardrobe
16
Doors adjustment process
Page 17
Page
Wardrobe
Step 01
Start aligning all the doors using as reference the Top Panel (11).
disaligned
17
To adjust the alignment of the doors loosen
the indicated screw and adjust the 3 hinges
up or down on each door, and after aligned
retighten all the screws.
aligned
Correct adjustment!
Page 18
Page
Step 02
Adjusting the distance between the doors.
Wardrobe
18
To adjust the distance between the doors
turn the indicated screw to the clockwise
or counterclockwise.
Page 19
Page
Step 03
Adjusting the distance between the doors of the wardrobe
Top view of the wardrobe
disaligned doors
Wardrobe
19
To adjust the nearby of the doors to the wardrobe
loosen the indicated screw and adjust the hinge
forward or backward, then retighten the screw.
It is necessary to check all the hinges!
Top view of the wardrobe
aligned doors
Page 20
Page
Wardrobe
Attention!
To finish the assemblage, and after all the doors adjusted,
fix the hardware (A) in the indicated hinge holes.
Repeat the process for
all the hinges.
20
Congratulations!
Loading...