Page 1
ASSEMBLY INSTRUCTION
DINING TABLE
1 PC
Iron
2 PCS
1 PC
2 PCS 2 PCS
1
This page lists all the contents included in
the box. Please take the time to identify
the hardware as well as the individual
components to this product. As you
unpack and prepare for assembly, place
the contents on a carpeted or padded
area to protect them from damage.
Table Top
Left Leg
Right Leg
Connecting Rod
1/4 "
Bolt
1/4 "*3/4 "
20 PCS
12 PCS 20PCS
Flat Washer
1 PC
Allen Key
M4
Spring Washer
1/4 "
Page 2
Attach Left Leg (B) and Right Leg (C) to bottom of Table Top (A) using Bolt (F), Spring
Washer (G), Flat Washer (H) with Allen Key (I).
Note: At this stage, do not fully tighten the Bolts.
2
A
B
B
C
C
H
G
F
I
Attach Iron (D) to Left Leg (B) and Right Leg (C) using Bolt (F), Flat Washer (H) with Allen Key
(I).
Note: At this stage, tighten all Bolts at all joints fully in a sequential manner.
F
H
I
D
Page 3
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
Cleaning & Care
3
With assistance from your adult partners, turn the Dining Table right way up. Adjust
the Pre-installed Levelers on the bottom of Left Leg (B) and Right Leg (C) until the
Dining Table is level with the ground.
Adjust Pre-installed Levelers
height to achieve balance.
C
B
C
A
I
F
G
H
A
B
C
B
C
Attach Connecting Rod (E) to Left Leg (B) and Right Leg (C) using Bolt (F), Spring Washer (G),
Flat Washer (H) with Allen Key (I).
Note: Lock all the screws after they have aligned the holes.
Loading...