Page 1
35
lb
15
lb
26
lb
The indicated values consider static weights and evenly distributed over the parts.
Bathroom Vanity Sink
Page 2
INCLUDED IN THE PACKAGE
09
06
05
07
n.° ID
01
02
03
04
05
06
07
08
09
02
08
08
Parts Identification (Description)
Shelf
Left Side Panel
Right Side Panel
Base
Top Panel
Left Door
Right Door
Wood Feet
Countertop washbasin
01
03
04
08
08
Quantity
1
1
1
1
1
1
1
4
1
2
Page 3
TOOLS NEEDED
screwdriver.
IMPORTANT! Two people are recommended to assemble and install this product.
The cabinet can be installed with the feet or without the feet, suspended and fixed to the wall (check the conditions
!
of the wall to anchor the cabinet).
Simple hammer.Flat head and phillips
Level indicator.
Electric drill and electric screwdriver with
drill bit Ø1/2 inch and phillips tips.
INCLUDED IN THE HARDWARE
A
12x
D
4x
G
2x
B
6x
E
10x
H
28x
C
4x
F
2x
I
4x
J
4x
M
2x
K
4x
N
2x
L
4x
3
Page 4
STEP 1
Preparing the Side Panels (02) and (03):
• Fix the metal brackets (F) with bolts (H) in
the Left Side Panel (02) and in the Right
Side Panel (03), as shown in the DETAIL 1.
STEP 2
0302
DETAIL 1
• Connect the Left Side Panel (02)
and the Right Side Panel (03) on
the Shelf (01) with dowels (A)
and bolts (B).
• At the end of the fixing, apply
the adhesive covers (E) on
the bolts (B).
02
To assemble the cabinet with the feet, see STEP 3.
!
To assemble the cabinet without the feet, go to STEP 4.
STEP 3
03
01
• Fix the wood feet (08) under the Base (04)
with the bolts (I).
• Apply the plastic covers (J) on the bolts (I).
• Apply the adhesive protective felts (K)
under the feet (08).
4
08
08
04
08
08
Page 5
STEP 4
• Connect the Top Panel (05) onto the Side Panels
(02) and (03) using dowels (A) and the cam lock
hardware (C + D). At the end of the fixation,
apply the adhesive covers (E) over the holes of
the hardware (D).
• Connect the Side Panels (02) and (03) on the
Base (04) with dowels (A) and bolts (B).
• If you have chosen to install the cabinet without
the feet, apply the adhesive covers (E) over the
four unused holes to fix the feet in the Base (04).
05
03
02
01
04
STEP 5
ATENTION!
Before installing the cabinet, check
the conditions of the wall to anchor
the furniture and the existence and
posicion of hydraulic, electrical and
gas pipes, avoiding damage to these
structures when drilling the holes
for the bushings and bolts.
The bushings (M) supplied with the
product are for hollow walls or dry
wall type. Check the type of the wall
on which the installation will be made
and, if necessary, look for more
suitable bushings or devices.
To mark the position and fix the
cabinet on the wall, check the level of
the entire assembly and the position
of the feet in relation to the floor.
• Place the already assembled cabinet
on the desired site for installation
and mark the position of the holes
on the wall to fixation throught the
two metal brackets (F), as shown in
the drawing and using the brackets
themselves as reference.
• With electric drill and
make the two holes in the wall.
• Apply the bushings (M) into the two
holes in the wall.
• Reposition the cabinet in the place
and apply the bolts 1/4 x 2.1/4" as
shown in the drawing, for fixing the
brackets (F) at the bushings (M)
already applied on the wall.
• At the end of the fixation, apply the
plastic covers (G) over the metal
brackets (F).
• Install the washbasin (09) on the
cabinet.
Install the siphon* and tap*.
drill bit Ø1/2",
FRONT VIEW
09
05
02
04
1/2" hole in the
wall for bushing
and bolt (M)
03
1/2" hole
in the wall
DETAIL 2
Kap Toggle
bushing ( M)
Bolt
1/4 x 2.1/4"
___________
Siphon and tap are items not supplied with the product.
*
5
Page 6
STEP 6
Preparing the Doors (06) and (07):
• Fix the hinges (L) with bolts (H) in
the Left Door (06) and in the Right
Door (07), as shown in the DETAIL 3.
• Insert the plastic ring (N) in the
Doors (06) and (07).
STEP 7
Installing the Doors (06) and (07):
• Fix the hinges connectors (L) of the
Doors (06) and (07) on the Side
Panels (02) and (03) with bolts (H),
taking the markings on the Side
Panels (02) and (03) as reference
for correct positioning.
The hinge and connector includes
two more bolts, shown in DETAIL 4.
Use these fixer and adjustment bolts
to tighten, adjust and align the door.
09
05
02
06
06
07
DETAIL 3
03
07
01
04
DETAIL 4
Fixer and
adjustment
bolts
6
Loading...