Page 1
Creative design
Better life
Cabinet
Instructions
The picture is for reference only, please refer to the actual product Please read the
instruction manual carefully before using this product and follow the instructions to
assembleWarning: It is forbidden to use it on uneven, staircases to prevent the product
from tilting and affecting the stability
Page 2
Assembly instructions
Step description
Component list
Please check the quantity and quality of the components, and contact the
seller in time if there is any abnormality
①Door plank ②Back plank ⑤Back plank④Side panel ⑥Side panel ⑦Side panel
⑭ Screws
⑧Roof ⑫Roof ⑬Layer board⑩Layer board⑨Floor ⑪Floor
③Side panel
1.Lay ② the back flat
on the ground
5.Lay ⑤ the back flat
on the ground
②
2.Installed roof and floor plate
as shown
⑤
6.As shown in figure layer board
and roof installation
⑫
⑬
⑩
⑨
③
3.Mount on both sides of
the side panel
7.Mount on both sides of
the side panel
④
4.Mount base plate, the upper part
of the installation is complete
⑦⑥
⑪
Tips
Please follow the steps below to install step by step. This product adopts high-density environmental
protection wood-plastic board, waterproof and moisture-proof. When installing with strong toughness,
please follow the position of the eyelet and align the tenon Press in step by step. If the installation order
is wrong, you can disassemble and reinstall. This product may have a little dust due to static electricity
during the production process. Just wipe with a rag during installation. If you find that the board is missing,
damaged or other problems during the installation, please contact the seller in time!
①
8.No. (1) door plank
⑧
9.Cover the top cover plate, the
lower part of the installation
is complete
10.Upper and lower parts together
and screw on the screw, the
installation is complete
Loading...