Page 1
、
Hanging Rod
Allen Key
Drawer unit screw
Rod achor
Shelf Support
Cam lock/screw
Wooden dowel
甾
晷
δ
q,
书 ° 遭
书
0
灬
`
臼 0 口 Ⅱ
溺
淘
咤
⑴
`魁
豸
蟹
㈦
⌒
ˇ
`
0
\
廿
∞
丶
§
λ
ハ 恣
逞
’
^
导 导
° 〓
⒐
ω∞
⒐
品
Q●
Φ
`冖
`
⒐
忭
早
Page 2
㈡
MIDDLE
PANEL
BASE PANEL
Step 1a - Screw in cam screw (B) and insert wooden dowel (A) into BASE PANEL
Step 1b - Lower MIDDLE PANEL into BASE PANEL
Step 1c - Lock cam lock (B) by turning it clockwise 180 degrees
Step 2a - Screw in cam screws (B) on both sides of the MIDDLE PANEL's back edge
Step 2b - Insert PANEL STAYS and lock cam locks (B), from bottom to top
Step 2c - Slide in BACK PANEL after each PANEL STAY
is locked in
Step 2d - Repeat for all 4 PANEL STAYS
and 6 BACK PANELS are in
place
BACK PANEL
PANEL
STAY
PANEL
STAY
《
〓
∞
`
一
Φ
巳
Page 3
TOP PANEL
FRONT TRIM
Step 3a - Screw in cam screw (B) into FRONT TRIM and insert cam lock (B) in
TOP PANEL
Step 3b - Insert wooden dowel (A) in corresponding holes
Step 3c - Attach FRONT TRIM to TOP PANEL and lock cam lock (B)
Step 3d - Screw in cam screws (B )on the underside of the TOP PANEL
Step 3e - With helper, carefully align cam screws
with corresponding holes, lower
the TOP PANEL onto the
main frame
LEFT
SIDE
PANEL
RIGHT
SIDE
PANEL
Step 4a - Prepare the two SIDE PANELS by screwing in the cam screws (B) and
inserting wooden dowels (B) along the inside edge of the PANELS
Step 4b - With helper, carefully align cam screws of LEFT SIDE
PANEL to corresponding holes on the FRAME
Step 4c - Lock all cam screws to secure the PANEL
Step 4d - Repeat for RIGHT SIDE PANEL
FRAME
卟
吻
`
灬
℃
Page 4
〓 〓
TOP SHELF
TOP SHELF
BOTTOM
SHELF
Step 5a - Affix HANGER ROD HOLDER (D) to TOP SHELF by
threading screw (D)through TOP SHELF
Step 5b - Affix shelf support screws (C) on the SIDE PANELS
and MIDDLE PANEL
Step 5c - Insert black plastic shelf supports (C) on underside
of TOP SHELVES
Step 5d - Align TOP SHELF to
shelf support screws and lower
SHELF in place
5e - Insert drawer unit
on desired side of
wardrobe
5f - Lower the BOTTOM
SHELF into place
5g - With the top drawer open,
thread screw (E) from
drawer unit to lock it
to underside of
BOTTOM SHELF
6a - With helper, angle in the bottom of DOOR so as to align the two rollers at
the bottom of the door to fall perfectly on the inside track at bottom of frame
6b - Stand door up and lock it in place by depressing the small knob and pushing it
up into the corresponding groove
6c - Repeat for second DOOR
NOTE: If doors move on its own,
the floor is likely uneven. To
correct this, prop up the lower
side with filler such as floor
protector pads
皮
〓
父
F%
Ω
℃
°
°
〓
Φ
卜
Φ
υ
,日
一
卜
∞
dΦ
Φ
卜
心
〓
Φ
Φ
`°
Qg,
%
皮
〓
Φ
°
c~伫
°
°
p亠
疋
〓
Φ
eζ
¤
卜
e吊
e︒
e
Φ
8⒍
eΦ
心
〓
〓
一
心
灬
u°
〓
∞
∽
Φ
⒐
ι
丶
Φ￡∞
$υ
Φ
°
p〓
δ
心
〓
●
Bυ
心
J
⌒
迅
BΦ
←
8bg
Φ
Φ灬∞
⒐
Loading...