Page 1
Assembly Instructions
Caution : You must read this before you proceed
DINING TABLE
Part List
Label Picture Description QTY
A Table Top 1
B Table Leg 4
Page 1 of 4
Page 2
Hardware
Label Picture Description QTY
JCBB M8 x 70mm
①
② Allen Key M5 1
Assembly Preparation
Before
Beginning
Assembly:
+ S/W 5/16"
+ F/W 5/16" x 22mm
8
Assembly Steps
Page 2 of 4
Page 3
Overview
This Dining Table has multiple parts and may require up to some 30
minutes to assemble. To give you an overview of the Dining Table parts, the
above picture is to help you put the various parts into perspective. Please
read through the instructions below to familiarise yourself with the parts and
steps before assembly.
Step 1
Place the Table Top (A) face down onto a clean, soft surface to avoid any
scratches or damages to the product.
Position the Table Leg (B) as shown. Fix the leg with JCBB Bolt ① + Spring
Washer + Flat Washer using Allen Key ②.
DO NOT tighten a Bolt fully and then move on towards another one.
Repeat the same process with the remaining three Legs.
In case the table wobbles, need loosen tighten the screw and bolts, and use
your hand press the top of the table, to make sure the table eveness, and
then full tighten the bolts squence.
FULLY TIGHTEN THE BOLT NOW.
With assistance from your adult partner, stand the Table up.
Your Table is now ready for use.
Page 3 of 4
Page 4
Care & Maintenance
Page 4 of 4
Loading...