Page 1
BAR STOOL
k you for purchasing the
Than
Bar stool！
Before you st
art, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the stool, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all fitting out of reach of children.
A
are:
Bolt M6x31.5mm
x 4
Hardw
Component:
1
B
C
Plastic Washer
Allen Wrench
M4 x 1
x 8
2
Stool
Stool
1
Page 1 of 2
Body
x1
2
Base
x1
Page 2
BAR STOOL
STEP 1:
Pleas
e put Stool Body (1) upside down on a carpeted or padded area.
Positon Stool Base (2) to the bottom of Stool Body (1).
Insert 4 pieces of Bolt (B) into the holes on bottom of Stool Body (1) through the holes on 8 pieces of Plastic washer (B)
and Stool Base (2) as shown.
Use Allen Wrench (C) to tighten all Bolts (A) clockwise until secure.
2
C
A
STEP 2:
Carefully
1
Ax4 Bx8 Cx1
turn over the assembled stool.
B
B
1
Not
e: Make sure to position 1 piece of Plastic Washer (B)
on the bottom
on the top of leg tube for each Bolt (A).
of leg tube, and 1 piece of Plastic Washer (B)
Hardware & Tool required
sembly is complete. Your stool is ready to be use now!
As
Page 2 of 2
Loading...