Page 1
Page 1 of 1
ROUND METAL END TABLE WITH 8MM
TEMPERED GLASS TOP
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
This product is designed for residential use only.
HARDWARE LIST
A (8) 1/4” x 15mm Sunk Bolts
B (4) 1/4” x 25mm Sunk Bolts
C (1) Allen Wrench
D (4) Glas Pads
PARTS LIST
E (1) Table Top Frame
F (1) Glass Top
G (1) Support Ring
H (4) Legs
FIGURE 1
H
A
A
H
AA
H
E
QTYPAR T
8A
1C
HARDWARE QTYPAR T HARDWARE
B
4
4D
STEP 1 - Figure 1
Begin assembly by attaching Legs (H) to Table Top
Frame (E) using 2 Sunk Bolts (A) per leg. Do not
tighten bolts at this time.
STEP 2 - Figure 2
Attach Support Ring (G) to Legs (H) using 1 Sunk Bolt
(B) per leg. Tighten all bolts from steps 1 and 2 with
Allen Wrench (C) provided.
STEP 3 - Figure 2
Attach Glass Pads (D) to tabs on Table Top Frame (E).
H
H
DD
DD
H
B
B
B
B
BB
H
G
DD
DD
BB
STEP 4 - Figure 3
Carefully place Glass Top (F) down into Table Top
Frame (E). The assembly is now complete.
F
E
E
FIGURE 2
FIGURE 3
H
CARE & MAINTENANCE
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
Loading...