Page 1
This page lists all the contents included in
the box. Please take the time to identify the
hardware as well as the individual
components to this product. As you unpack
and prepare for assembly, place the
contents on a carpeted or padded area to
protect them from damage.
Page 2
Insert 4 connecting tubes (B) to side frame (A) using bolts (G)*8 with allen wrench
(H), tighten bolts half way.
Attach side frame (C) to the connecting tube (B) using bolts (G)*8 with allen wrench
(H), tighten bolts half way.
Check to make sure that the side frame (A) and side frame (C) to are not uneven, once
all pieces are straight, fasten all bolts tightly.
Page 3
Attach the table top (D) to assembled parts using bolts (G)*4 with allen wrench (H),
tighten securely.
Keep the assembled parts upright, place the shelf (E&F) onto the frame.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean
surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen
over time. Periodically check that all connections are tight.
Attention:
To avoid the products fall down,
please install the furniture tipping
restraint and refer to the installation
instructions as shown on the plastic
bag.
Loading...