Mercury Row MCRW6238 Assembly Instructions

SIDE SOFA
ASSEMBLY INSTRUCTIONS
BEFORE YOU START ASSEMBLING YOUR FURNITURE:
CHECK THAT YOU HAVE ALL THE PIECES LISTED ON THE LEFT HAND SIDE. LAY A CLEAN SHEET ON A FLAT SURFACE BIG ENOUGH TO ASSEMBLE YOUR FURNITURE ON IN ORDER TO PROTECT YOUR FURNITURE.
A 1
B
1
1.
Attach side (C) to the sofa base (B). Do this by laying side (C) on the ground with the bolt brackets facing you. Then align the bolt brackets of the sofa base (C) with those in the sofa side (C) as shown in the diagram above. Insert bolt (D) through the bracket of the sofa base (B) and through the bolt bracket of the sofa side (C). Then secure with a washer (F) and a nut (E). Loosely tighten the nuts and bolts with the spanner (G) and allen key (H).
C 1
D 11
E 11
F
G
H
1
1
1
2.
Next, attach the sofa back (A) to the sofa base and sofa side (B+C). Lay the sofa back (A) down so that the bolt brackets are facing you. Then place (B+C) in position, as shown in the above image, so that the bolt brackets are all aligned. Insert bolt (D) through the brackets of the sofa base (B) and through the bolt brackets of the sofa side (C). Then secure with a washer (F) and a nut (E). Loosely tighten the nuts and bolts with the spanner (G) and allen key (H).
SOFA ASSEMBLY INSTRUCTIONS
Once all of the nuts and bolts are in place, fully tighten all of the nuts and bolts used in the assembly using the spanner (G) and allen key (H).
TABLE
ASSEMBLY INSTRUCTIONS
CHECK THAT YOU HAVE ALL THE PIECES LISTED ON THE LEFT HAND SIDE. LAY A CLEAN SHEET ON A FLAT SURFACE BIG ENOUGH TO ASSEMBLE YOUR FURNITURE ON IN ORDER TO PROTECT YOUR FURNITURE.
A 2
B
1
1.
Lay the table top (B) down with the top facing down. Then attach chair legs (A) to the base of the table top (B). Align the screw holes of both (A and B) and insert screws (D) through a washer (E) then through both the holes. Loosely tighten the screws with the allen key (F). Once you have done this for all 8 screws, fully tighten them to secure the chair legs in place.
C 1
D 8
E 8
F
1
M6*35
2.
Turn your table upright and place the tempered glass (C) over the table top.
TABLE ASSEMBLY INSTRUCTIONS
Loading...