! !
ASSEMBLY INSTRUCTION
COCKTAIL TABLE WITH SHELF
Top panel Lower panel
Side frame Crossbar
Screw
1/4"X1/2"XØ13
Allen wrench
1PC 2PCS 3PCS
1
12PCS
1PC
1PC
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly,place
the contents on a carpeted or padded area to
protect them from damage.
A B
C
D
E
F
Floor leveler
4PCS
G
Screw
1/4"X1-1/2"XØ15
8PCS
H
! !
Do not tighten screws & bolts until the entire unit is completely assembled.
2
1
2
Attach Crossbar (D) to Side frame (C) using Screw (E) and Allen wrench (F) as shown.
Install Floor leveler (G) into the bottom of Side frame (C) as shown.
Tighten by turning CLOCKWISE until snug.
!
3
3
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry
or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
4
Attach Side frame (C) to TOP panel (A) using Screw (H) and Allen wrench (F) as
shown.
Attach Side frame (C) to Lower panel (B) using Screw (H) and Allen wrench (F) as shown.
Tight all screws and carefully turn the assembled unit upright.
Loading...