Page 1
EASY CONNECT®
IFM662A13
09/16
INSTALLATION INSTRUCTIONS
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
IMPORTANT SAFETY
!
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
DO NOT REMOVE INSULATION FROM FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT
CONDUCTOR.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
Easy Connect
mounting
bracket
(L)
Black (Live)
L
N
Star
Washer
Nipple
N
1. Attach nipple to
mounting bracket. Adjust
Hex
so it will clear hole in back
Nut
of fixture and then lock
nipple in place with star
washer and hex nut.
2. Attach mounting
bracket to electrical box
with electrical box screws
(not included).
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS
INSTRUCTIONS
Green (Ground)
N
(N)
White
L
Black (Live)
(Neutral)
(L)
4. Connect (push) electrical
wires from fixture into correct
inserts.
5. Once connections of
wires are completed, carefully
tuck wires and wire nuts into
Fixture
the electrical box making sure
no bare wire (on the black and
white) is visible at the wire
nuts.
(N)
White
(Neutral)
Green
(Ground)
(L)
Black (Live)
Green
(Ground)
(L)
Black (Live)
Green
(Ground)
L
L
L
Electrical box
screws
Option 1
N
Option 2
N
Jumper
(N)
White
(Neutral)
(N)
White
(Neutral)
Wire
3. Option 1: Connect
(push) electrical wires from
electric box (house wiring)
into correct inserts.
Option 2: For multiple
black (live) & white (neutral)
wires joined in the electrical
box (house wiring), attach a
single “black” and “white”
Jumper Wire before
connecting. Strip 7mm
from a 6” Jumper Wires
(AWG 12-24) supplied. Then
connect (push) wires into
correct inserts.
Canopy
Star
Washer
Nipple
Cap nut
Bulb
6. Place the canopy over the
nipple and tighten with cap
nut and star washer.
7. Install specified bulb type
and wattage (not included).
Tel: (613) 342-5424, Fax: (800) 263-4598
Loading...