Page 1
ASSEMBLY INSTRUCTIONS
Page 1 of 4
Page 2
ASSEMBLY TIPS:
CUSHION
FRAME
CROSSBAR
SIDE
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior to start of assembly.
3.please follow attached instructions in the same sequence as numbered to assurefast &
easy assembly.
Warning!
1.Don't attempt to repair or modify parts that are broken or defective.Please contsct the
store immediately.
2.This product is for home use only and not intended for commercial estabalishment.
PARTS IDENTIFICATION:
(A)
(B)
(C)
CUSHION
CUSHION
SUPPORT
CONNECTION ROD
1PC
1PC
2PCS
(D)
BASEÿÿ
2PCS
Page 2 of 4
Page 3
Z
Step 1: Place the cushion (A) upside down on a soft surface.
Then align and attach the cushion frame (B) to the cushion (A)
using the screws (1) tighten with the screw driver (NOT INCLUDED)
You will need two people for this installation. And will take about thirtyfive minutes.
HARDWARE PACKAGE:
NO
1
2
3
4
DESCRIPTION
SCREW Φ
ALLEN BOLT Φ1/4*14mm
LEVERLER
ALLEN WRENCH Φ1/4*66mm
4*40mm
Φ1/4*10mm
FIGURE
QTY
6pcs
16pcs
4pcs
1pc
STEP 1:
1
6PCS
Page 3 of 4
Page 4
Page 4 of 4
STEP 2: Align and attach the crossbar (C) to the side (D)
using allen bolt (2) tighten with allen wrench. Then screw four
levelers into bottom of the bases.
STEP 3: Align and holes of the base to them of cusion support
and tighten them up with bolt and allen wrench.
Loading...