350.025UK User Manual
VDB720P
Smart Wi-Fi HD Video Doorbell
Item ref: 350.025UK
User Manual
Bring safety and security to your home with a wireless video doorbell. Easily answer the door,
wherever you are, by receiving crystal clear images and enabling 2-way audio straight to your
smart device via the App. The handy motion detector feature sends alerts to your device when
someone’s near the front door. For additional security, day and night mode automatically
switches and images are clearly visible even in darkness, for safety at all times. With quick and
convenient setup, install the App and connect the doorbell to your home Wi-Fi network in
minutes. The stylish and slim design will be a great addition to the front of your house, simply
mount to the wall and be assured with the confidence of knowing who’s at the door, whether
you’re at home or out.
Features:
• HD Video: Receive and record crystal clear images direct to your smart device
• Two-Way Audio: Answer the door wherever you are, then see and converse with
your visitors directly from your smart device
• Night Vision Mode: Automatically enabled in the hours of darkness
• Motion Detection: Sends alerts to your smart device when someone is in close
proximity of the unit
• Quick and Easy Setup: Connects to your 2.4Ghz home Wi-Fi network in minutes
• Easy to use App compatible with iOS and Android devices
• Comes complete with rechargeable batteries and wall fixing kit
Specifications:
Video resolution
1280 x 720
Viewing angle
166°
Audio format
Two-way audio with noise cancelling
Transmission frequency
IEEE 802 11 b/g/n (2.4Ghz only)
Storage capacity
Up to 32GB SD card (not supplied)
IP rating
IP44
Batteries
2x 18650 batteries (total 5200mAh)
Power consumption
200uA in standby, 170mA in use
Dimensions
140 x 75 x 30mm
Weight
275g
350.025UK User Manual
Pack contents:
1pc Smart video doorbell
2pcs 18650 Rechargeable batteries
1pc Security screw and key
1pc Wall fixing kit including self-adhesive pad, screws and wall plugs
User manual
Unit features:
Installation guide:
1. Disconnect the mounting plate from the main unit by sliding the unit upwards while
holding the plate.
2. Using the fixing screws and plugs provided, fix the plate to the wall in the desired
location. Alternatively, use the self-adhesive strip provided if fixing to a PVC doorframe.
NOTE: It is advisable to test the video quality of the doorbell before installation to
ensure it’s receiving a strong enough signal from your wireless network.
3. If permanent mains power is required, a qualified electrician should be used to connect
the unit to a UK power outlet using the mains connection screws and suitable cable.
4. If using the rechargeable batteries supplied in the unit, ensure these are inserted in the
PIR sensor
Camera lens
Indicator LED
Speaker
Microphone
Call Button
IR LED
Light Sensor
PIR
Fixing holes
Mains connection
screws
Locating pins
Security screw
locating pin
USB Charging port
Mains connections
Reset button
Battery
compartment
350.025UK User Manual
correct direction and that any shipping tags have been removed from the contacts.
5. Press the reset button for around 5 seconds until the indicator LEDs blink slowly to show
that the unit is ready to use.
6. Replace the battery cover, slot the main unit back into the mounting plate and fix
securely with the security screw and hex-key provided.
Device Setup:
1. To pair the doorbell with your smart device you need to install the App. To find the App
you can either search for “XSH Cam” in the relevant App store, or scan the following QR
codes straight into your smart device:
App - iOS App - Google App - Android
2. Before you start, ensure that your smart device is connected to a 2.4GHz Wi-Fi network.
NOTE: This device won’t work on faster 4.8Ghz networks!
3. Launch the XSH Cam App on your smart device and tap the “Add a device” button,
followed by “Setup device”.
4. Power up the smart doorbell and you should hear a voice prompt saying the device is
ready to pair. If you don’t hear this prompt, press and hold the red reset button on the
back of the unit for around 5 seconds to reset the device. Once in pairing mode the LED
indicator on the front of the doorbell will flash blue.
5. The App will automatically connect to the same Wi-Fi network as your smart device and
fill in the name accordingly. Enter the correct password for your
wireless network and press the “Next” button at the bottom of the
screen.
6. Your smart device will now begin searching for the doorbell. To
ensure they connect with each other, make sure they are within a
30cm distance and that the volume on your smart device is raised
to an audible level, so that you can hear the pairing tone (see
right).
7. Once paired you will hear an audible connected message and see
the confirmation screen where you need to enter a name for your
device (if necessary) and password (of at least 8 characters). Select
Non-Chinese Mainland at the bottom and press the “Finish” button.
350.025UK User Manual
8. Setup is now complete, and the doorbell will appear as a new
device on the top of your device list. To view a live feed at any
time, press the small screen within your device list. (see right)
9. With live feed running you can enter the features and settings of
the camera by clicking on the settings button on the bottom right
hand corner. This now gives you the option to amend and adjust
various settings on the device to suit your environment including;
poor light, PIR detection level and whether you want to record
video and images to the internal SD card (not supplied).
10. Also, in this section is share QR code, which when selected can be
sent to other family and friends who also want to share the
doorbell video feed.
Wi-Fi Doorbell Features:
1. There are control buttons on the live video screen to assist you in recording, muting,
zooming and making live voice calls, please see the diagram below for full information.
1. SD/HD toggle
2. Live Wi-Fi, battery and connection info
3. Live video feed
4. Snapshot
5. Live 2-way speech
6. Video record
7. View photo album (on device or storage)
8. Switch between standard and zoom mode
9. Cruise from left to right in zoom mode
10. Voice mute
11. Settings (enter to adjust PIR, night mode etc)
2. When a visitor presses the doorbell, a chime sound will be heard on all connected smart
devices and a notification message will appear on the screens. To view your visitor either
press the notification directly or open the App and press anywhere on the live video feed
screen (3).
3. To hold a conversation with your visitor, press the Live speech button (5). You can also
record video footage of the conversation and your visitors’ movements by pressing the
Video record button (6).
350.025UK User Manual
4. To view the video feed in full screen mode, rotate your smart device into the landscape
position. Zoom in and out by using the pinching method on the screen, commonly used
on most touch screen devices.
5. The doorbell is fitted with a PIR sensor which detects movements around the unit and
sends you an audible and visible notification when triggered. The sensitivity of this can be
adjusted in the settings screen. There are 4 options to choose from: Disabled, which
turns off the PIR function; Low, which only sends a notification after 7 seconds of
continued movements near the unit; Medium, sends a notification after 5 seconds of
movement and High, which sends a notification after only 1-2 seconds of movement.
When using an internal SD card with the doorbell, the PIR alert function will also begin
recording live video for around 30 seconds directly to the unit when triggered.
Note: When using in a busy or crowded location, it is recommended to disable the PIR
function to avoid continuous alerts.
Useful Reminders:
• The device is powered by 2 x 18650 rechargeable lithium batteries. When fully charged,
they will provide the unit with up to 6 months of usage. When the batteries are running
low on power, a warning message will appear on all connected smart devices. At this
point, recharge the batteries as soon as possible to avoid the unit powering down,
providing no protection.
• Try to keep the doorbell in good reach of your wireless router’s coverage and try to avoid
any blockages by thick walls, ceilings and doors. Permanent mounting of the device
should only be undertaken once a video stream has been viewed and confirmed of
acceptable quality.
• This device is a low power, intelligent product that supports remote wakeup from
connected devices, PIR human detection and activation by doorbell press. After any of
these functions, the unit will only remain in a live state for a maximum of 30 seconds,
before returning to its resting standby state.
•
There is also an additional plug-in chime available (not supplied), which can be connected
into the same network as the doorbell and smart devices. This chime will only be
triggered when the doorbell press is activated and can be useful if there are no connected
smart devices within the environment at any time.
Troubleshooting:
Smart device won’t
connect to doorbell
Ensure both devices are within 30cm of each other
Ensure you are using a 2.4Ghz network
Ensure the volume on your smart device is at an audible
level
No audio on smart
device
Ensure the volume is turned up
Ensure the voice mute button isn’t selected
350.025UK User Manual
PIR detection is being
triggered too often
Ensure the PIR on the doorbell is clean and free of
obstructions
Adjust the sensitivity of the PIR in the settings mode to
suit the environment
PIR detection isn’t
working
Ensure the PIR on the doorbell is clean and free of
obstructions
Ensure the PIR settings on your device are set to the
correct level
My visitor cannot hear
me outside, but I can
hear them
Ensure you have pressed the 2-way talk button on your
smart device
The video feed quality
is poor or lagging
Ensure the doorbell is located within a reasonable distance
to your wireless router
Warnings:
• For reasons of electrical safety never clean the unit with water or other liquids or immerse
in water. Always clean the lens of the camera and unit with a dry and soft lint-free cloth.
• Try to keep the unit out of direct sunlight and as much as possible away from heavy
rainfall and moisture.
• If connecting to the UK-mains supply always consult a qualified electrician to carry out the
installation.
• Please do not use this device if you find that it is damaged in any way.
•
Do not attempt to repair this device or take it apart under any circumstances, as this will
invalidate your warranty.
IP44
This product is classed as Electrical or Electronic equipment and should not be disposed with other
household or commercial waste at the end of its useful life. The goods must be disposed of according to
your local council guidelines.
Errors and omissions excepted.
Copyright© 2018 AVSL Group Ltd.
Loading...