Mercury AMD02, AMD04, AMD06, AMD08 User Manual

www.avsl.com 130.030UK User Manual

4G Ready VHF/UHF Distribution Amplifiers

AMD02/04/06/08

Item ref:

130.030/031/032/033UK User Manual

A range of Distribution amplifiers with built in 4G LTE filter, designed to improve the quality of audio and video by amplifying weak VHF/UHF signals and distributing them across a designated area. Suitable for both professional and domestic installations and fully compatible with Digital Terrestrial/Satellite/Cable TV and DAB/FM radio signals.

Features:

• Fully screened amplifier compatible with Digital Terrestrial/Satellite/Cable TV and DAB/FM

radio signals

• Integrated LTE signal filter avoids interference and channel loss from 4G mobile signals

• Coaxial socket connection, F socket adaptors included to allow F-Type connection

• Built in low noise amplifier with wideband output

• Built in surge protection – LED lights when a power surge is detected

• Short circuit protection – LED illuminates when a short circuit is detected on an output

• Maximum output limiter prevents overload

• High gain output for additional distribution connection

• Separate inputs for VHF and UHF

• DC pass allows the control of satellite via Magic Eye remote extender (124.157)

• Side mounted terminals allow easy cable management

CAUTION

Please read through this manual carefully before use. This

product is strictly for indoor use only and must be kept in a dry

and cool environment and out of reach from children and pets.

www.avsl.com 130.030UK User Manual

Specifications:

AMD02

AMD04

AMD06

AMD08

No of inputs

2 2 2

No of outputs

2+Full

4+Full

6+Full

8+Full

Frequency response

47-230MHz, 470-790MHz

47-230MHz,

470-790MHz

47-230MHz,

470-790MHz

Max output level

94dBµV

90dBµV

87dBµV

Gain per split

12dB

8dB

Gain on Full

20dB

Noise

<4dB

Isolation loss

22dB

Dimension

134.5 x 70 x

44.4mm

179.5 x 70 x

44.4mm

224.5 x 70 x 44.4mm

269.5 x 70 x 44.4mm

Weight

270g

350g

420g

500g

Installation:

Before installation please ensure all devices to be connected to the amplifier are switched off and disconnected from the mains. The unit is designed to be connected via coaxial connectors, although ftype adaptors are also supplied for additional compatibility. On the back of the casing there are also two mounting holes which allow the unit to be fixed to the wall.

AV:Link distribution amplifiers are designed to amplify weak, poor quality signals and distribute them to different destinations. For installations that are close to a TV transmitter or any other form of radio transmitter or high-power source, you may experience blocking or a frozen picture. In this instance an attenuator is required for turning down the signal to suitable levels for TV viewing.

+ 1 hidden pages