NOTE: The following applies to CE‑marked products only.
Declaration of Conformity—Mercury MerCruiser
This sterndrive or inboard engine when installed in accordance to Mercury MerCruiser’s instructions complies with the
requirements of the following directives by meeting the associated standards, as amended:
Recreational Craft Propulsion Engines with the Requirements of Directive 94/25/EC as amended by 2003/44/EC
Name of engine manufacturer: Mercury Marine
Address: W6250 W. Pioneer Road, P.O. Box 1939
Town: Fond du Lac, WIPost Code: 54936‑1939Country: USA
Name of Authorized Representative: Brunswick Marine in EMEA Inc.
Address: Parc Industriel de Petit‑Rechain
Town: VerviersPost Code: 4800Country: Belgium
Name of Notified Body for exhaust emission assessment: Det Norske Veritas AS
Unique engine identification number: starting serial
number
EC Module H certificate number:
Essential requirements
Annex 1.B—Exhaust Emissions
B.1 engine identification☐☐☒
B.2 exhaust emission requirements☒*☐☐*EN ISO 8178‑1:1996
B.3 durability☐☐☒
B.4 owner's manual☒☐☐ISO 8665:1995
Annex 1.C—Noise Emissions
C.1 Noise emission levels☒*☐☐*EN ISO 14509
C.2 Owner's manual☐☒☐Owner's manual
This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of the engine
manufacturer that the engine(s) mentioned above complies (comply) with all applicable essential requirements in the way
specified.
Name / function:
Mark Schwabero, President, Mercury
Marine
Regulatory contact:
Regulations and Product Safety Department
Mercury Marine
W6250 W. Pioneer Road
Fond du Lac, WI 54936
USA
Standards
Other normative document/
method
Signature and title:
Date and place of issue:
Technical file
February 17, 2012
Fond du Lac, Wisconsin, USA
Please specify in more detail
(* = mandatory standard)
Identification Record
Please record the following information:
Engine Model and HorsepowerEngine Serial Number
Transom Assembly Serial Number (Sterndrive)Gear RatioSterndrive Unit Serial Number
Transmission Model (Inboard)Gear RatioTransmission Serial Number
Propeller NumberPitchDiameter
Hull Identification Number (HIN)Purchase Date
Boat ManufacturerBoat ModelLength
The serial numbers are the manufacturer’s keys to numerous engineering details that apply to your Mercury MerCruiser®
power package. When contacting your Authorized Mercury MerCruiser Dealer about service, always specify model and serial
numbers.
The description and specifications contained herein were in effect at the time this guide was approved for printing. Mercury
Marine, whose policy is one of continuous improvement, reserves the right to discontinue models at any time, or to change
specifications or designs, without notice and without incurring obligation.
Mercury, Mercury with Waves Logo, Mercury Marine, Mercury Precision Parts, Mercury Propellers, Mercury Racing,
MotorGuide, OptiMax, Quicksilver, SeaCore, Skyhook, SmartCraft, Sport‑Jet, Verado, VesselView, Zero Effort, Zeus, and #1
On the Water are registered trademarks of Brunswick Corporation. Mercury Product Protection is a registered service mark of
Brunswick Corporation.
Welcome
You have selected one of the finest marine power packages available. It incorporates numerous design features to assure
operating ease and durability.
With proper care and maintenance, you will thoroughly enjoy using this product for many boating seasons. To ensure maximum
performance and carefree use, we ask that you thoroughly read this manual.
The Operation, Maintenance and Warranty Manual contains specific instructions for using and maintaining your product. We
suggest that this manual remain with the product for ready reference whenever you are on the water.
Thank you for purchasing one of our Mercury MerCruiser products. We sincerely hope your boating will be pleasant!
Mercury MerCruiser
Warranty Message
The product you have purchased comes with a limited warranty from Mercury Marine; the terms of the warranty are set forth
in the Warranty Sections of this manual. The warranty statement contains a description of what is covered, what is not covered,
the duration of coverage, how to best obtain warranty coverage, important disclaimers and limitations of damages and other
related information. Please review this important information.
Mercury Marine products are designed and manufactured to comply with our own high quality standards, applicable industry
standards and regulations, as well as certain emissions regulations. At Mercury Marine every engine is operated and tested
before it is boxed for shipment to make sure that the product is ready for use. In addition, certain Mercury Marine products are
tested in a controlled and monitored environment, for up to 10 hours of engine run time, in order to verify and make a record of
compliance with applicable standards and regulations. All Mercury Marine product, sold as new, receives the applicable limited
warranty coverage, whether the engine participated in one of the test programs described above or not.
Read This Manual Thoroughly
IMPORTANT: If you don’t understand any portion of this manual, contact your dealer for a demonstration of actual starting and
operating procedures.
Notice
Throughout this publication, and on your power package, dangers, warnings, cautions, and notices, accompanied by the
International Hazard Symbol !, may be used to alert the installer/user to special instructions concerning a particular service
or operation that may be hazardous if performed incorrectly or carelessly. Observe them carefully.
These safety alerts alone cannot eliminate the hazards they warn of. Strict compliance with these special instructions while
performing the service, plus common sense operation, are major accident prevention measures.
DANGER
!
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
!
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
!
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in engine or major component failure.
IMPORTANT: Identifies information essential to the successful completion of the task.
NOTE: Indicates information that helps in the understanding of a particular step or action.
WARNING
!
The operator (driver) is responsible for the correct and safe operation of the boat, the equipment aboard and the safety of all
occupants aboard. We strongly recommend that the operator read this Operation, Maintenance and Warranty Manual and
thoroughly understand the operational instructions for the power package and all related accessories before the boat is used.
WARNING
!
The engine exhaust from this product contains chemicals known to the state of California to cause cancer, birth defects or
other reproductive harm.
TABLE OF CONTENTS
Section 1 - Warranty
Warranty Registration—United States and Canada.................. 2
Warranty Registration—Outside the United States and
Outside United States and Canada ‑ Check with your local distributor.
1.You may change your address on file with Mercury Marine at any time, including at time of warranty claim, by calling
Mercury Marine or sending a letter or fax with your name, old address, new address, and engine serial number to Mercury
Marine’s warranty registration department. Your dealer can also process this change of information.
Mercury Marine
Attn: Warranty Registration Department
W6250 W. Pioneer Road
P.O. Box 1939
Fond du Lac, WI 54936-1939
920-929-5054
Fax +1 920 907 6663
NOTE: Registration lists must be maintained by Mercury Marine and any dealer on marine products sold in the United
States, should a safety recall notification under the Federal Safety Act be required.
2.To be eligible for warranty coverage, the product must be registered with Mercury Marine. At the time of sale, the dealer
should complete the warranty registration and immediately submit it to Mercury Marine via MercNET, E‑mail, or mail. Upon
receipt of this warranty registration, Mercury Marine will record the registration.
3.Upon processing the warranty registration, Mercury Marine will send registration verification by mail to the purchaser of the
product. If this registration verification is not received within 30 days, please contact your selling dealer immediately.
Warranty coverage is not effective until your product is registered with Mercury Marine.
Warranty Registration—Outside the United States and Canada
1.It is important that your selling dealer fills out the warranty registration card completely and mails it to the distributor or
Marine Power Service Center responsible for administering the warranty registration and claim program for your area.
2.The warranty registration card identifies your name and address, product model and serial numbers, date of sale, type of
use and the selling distributor's and dealer's code number, name and address. The distributor or dealer also certifies that
you are the original purchaser and user of the product.
3.A copy of the warranty registration card, designated as the purchaser's copy, must be given to you immediately after the
card has been completely filled out by the selling distributor or dealer. This card represents your factory registration
identification, and should be retained by you for future use when required. Should you ever require warranty service on this
product, your dealer may ask you for the warranty registration card to verify date of purchase and to use the information on
the card to prepare the warranty claim forms.
4.In some countries, the Marine Power Service Center will issue you a permanent (plastic) warranty registration card within
30 days after receiving the factory copy of the warranty registration card from your distributor or dealer. If you receive a
plastic warranty registration card, you may discard the purchaser's copy that you received from the distributor or dealer
when you purchased the product. Ask your distributor or dealer if this plastic card program applies to you.
5.For further information concerning the warranty registration card and its relationship to Warranty Claim processing, refer to
the International Warranty. See Table of Contents.
IMPORTANT: Registration lists must be maintained by the factory and dealer in some countries by law. It is our desire to have
ALL products registered at the factory should it ever be necessary to contact you. Make sure your Mercury Marine distributor or
Mercury Marine authorized dealer fills out the warranty registration card immediately and sends the factory copy to the Marine
Power International Service Center for your area.
Transfer of Warranty
The limited warranty is transferable to a subsequent purchaser, but only for the remainder of the unused portion of the limited
warranty. This will not apply to products used for commercial applications.
To transfer the warranty to the subsequent owner, send or fax a copy of the Bill of Sale or Purchase Agreement, new owner’s
name, address, and engine serial number to Mercury Marine’s Warranty Registration Department. In the United States and
Canada, mail to:
Mercury Marine
Attn: Warranty Registration Department
W6250 W. Pioneer Road
P.O. Box 1939
Fond du Lac, WI 54936-1939
920-929-5054
Fax +1 920 907 6663
Upon processing the transfer of warranty, Mercury Marine will send registration verification to the new owner of the product by
mail.
There is no charge for this service.
Page 290-8M0074352 eng OCTOBER 2012
Section 1 - Warranty
For products purchased outside the United States and Canada, contact the distributor in your country, or the Marine Power
Service Center closest to you.
Mercury Installation Quality Certification Program
15502
Mercury MerCruiser products installed by a Mercury Installation Quality Certified Manufacturer are Installation Quality Certified
products and may receive an additional one (1) year of limited warranty coverage.
The Installation Quality Certification program was developed to recognize MerCruiser boatbuilder customers who have
achieved higher manufacturing standards. It is the first and only comprehensive manufacturer‑installation certification program
in the industry.
The program has three goals:
1.To enhance overall product quality.
2.To improve the boat ownership experience.
3.To enhance overall customer satisfaction.
The certification process is designed to review all facets of manufacturing and engine installation. The program is composed of
design, manufacturing, and installation review stages with which builders must comply. Certification applies leading‑edge
methodologies to create:
•Efficiencies and best practices specific to engine installation.
•World‑class assembly and component specifications.
•Efficient installation processes.
•Industry standard end‑of‑line test procedures.
Boatbuilders that successfully complete the program and meet all certification requirements earn Installation Quality System
Certified Manufacturer status and receive an additional one (1) year of Mercury limited factory warranty coverage on all
MerCruiser‑powered boats that are registered on and after the boatbuilder's certification date for all worldwide registrations.
Mercury has designated a section of our website to promote the Installation Quality Certification Program and communicate its
benefits to consumers. For a current list of MerCruiser‑powered boat brands that have earned Installation Quality Certification,
visit http://www.mercurymarine.com/service‑and‑support/customer‑support/warranty/
Mercury Product Protection Plan: United States and Canada
IMPORTANT: Certain performance products, triple engine installations, and commercial applications are excluded from the
Mercury Product Protection Plan program.
The Mercury Product Protection Plan provides coverage against unexpected mechanical and electrical breakdowns that may
occur beyond the standard limited warranty. The plan may be purchased up to twelve months after the original engine
registration date and is available with terms ranging from one to five years.
The optional Mercury Product Protection Plan is the only factory authorized extended warranty plan available for your engine.
See your participating Mercury MerCruiser dealer for complete program details.
Mercury Marine warrants its new products to be free of defects in material and workmanship during the period described
following.
Duration of Coverage
Warranty Period for Recreational Use
The warranty period begins on the date the product is first sold to a recreational‑use retail purchaser or the date on which
the product is first put into service, whichever occurs first. Products installed by an Installation Quality Certified Installer
receive one (1) year of additional warranty coverage. The repair or replacement of parts or the performance of service under
this warranty does not extend the life of this warranty beyond its original expiration date. The warranty period is specific to
the model covered; see your model for the base coverage period:
Coverage for Horizon Inboard Models, and Vazer 100 Sterndrive Models
The Limited Warranty for Horizon Inboard Models and Vazer 100 Models is four (4) years when installed by an
Installation Quality Certified Installer or three (3) years for non‑certified installations.
Coverage for SeaCore Sterndrive Models
The Limited Warranty for SeaCore Sterndrive Models is four (4) years when installed by an Installation Quality Certified
Installer or three (3) years for non‑certified installations.
Coverage for Tow Sports Inboard Models
The Limited Warranty for Tow Sports 5.7 TKS models is two (2) years when installed by an Installation Quality Certified
Installer or one (1) year for non‑certified installations.
The Limited Warranty for all other Tow Sports Inboard models is three (3) years when installed by an Installation
Quality Certified Installer or two (2) years for non‑certified installations.
Coverage for All Other Models
The Limited Warranty for all other Gasoline Sterndrive and Inboard models except those described above is two (2)
years when installed by an Installation Quality Certified Installer or one (1) year for non‑certified installations.
Warranty Period for Commercial Use
The warranty period begins on the date the product is first sold to a commercial‑use retail purchaser or the date on which
the product is first put into service, whichever occurs first. Commercial users of these products receive warranty coverage
for either one (1) year from the date of first retail sale or the accumulation of 500 hours of operation, whichever occurs first.
Commercial use is defined as any work‑related or employment‑related use of the product, or any use of the product that
generates income for any part of the warranty period, even if the product is only occasionally used for such purposes. The
repair or replacement of parts or the performance of service under this warranty does not extend the life of this warranty
beyond its original expiration date.
Transfer of Coverage
Unexpired warranty coverage can be transferred from one recreational‑use customer to a subsequent recreational‑use customer
upon proper reregistration of the product. Unexpired warranty coverage cannot be transferred either to or from a commercial‑use
customer.
Termination of Coverage
Warranty coverage is terminated for used product obtained in any of the following ways:
•Repossession from a retail customer
•Purchase at auction
•Purchase from a salvage yard
•Purchase from an insurance company that obtained the product as a result of an insurance claim
Conditions That Must Be Met in Order to Obtain Warranty Coverage
Warranty coverage is available only to retail customers that purchase from a dealer authorized by Mercury Marine to distribute
the product in the country in which the sale occurred, and then only after the pre‑delivery inspection process specified by
Mercury Marine is completed and documented. Warranty coverage becomes available upon proper registration of the product by
the authorized dealer. Inaccurate warranty registration information regarding recreational use or subsequent change of use from
recreational to commercial (unless properly reregistered) may void the warranty at the sole discretion of Mercury Marine. Routine
maintenance must be performed according to the maintenance schedule in the Operation, Maintenance & Warranty manual in
order to obtain warranty coverage. Mercury Marine reserves the right to make any warranty coverage contingent upon proof of
proper maintenance.
Page 490-8M0074352 eng OCTOBER 2012
Section 1 - Warranty
What Mercury Marine Will Do
Mercury Marine's sole and exclusive obligation under this warranty is limited to, at our option, repairing a defective part, replacing
such part or parts with new or Mercury Marine certified remanufactured parts, or refunding the purchase price of the Mercury
Marine product. Mercury Marine reserves the right to improve or modify products from time to time without assuming an
obligation to modify products previously manufactured.
How to Obtain Warranty Coverage
The customer must provide Mercury Marine with a reasonable opportunity to repair and reasonable access to the product for
warranty service. Warranty claims shall be made by delivering the product for inspection to a Mercury Marine dealer authorized
to service the product. If the purchaser cannot deliver the product to such a dealer, written notice must be given to Mercury
Marine. Mercury Marine will then arrange for the inspection and any covered repair. The purchaser in that case shall pay for all
related transportation charges and travel time. If the service provided is not covered by this warranty, the purchaser shall pay for
all related labor and material and any other expenses associated with that service. The purchaser shall not, unless requested by
Mercury Marine, ship the product or parts of the product directly to Mercury Marine. Proof of registered ownership must be
presented to the dealer at the time warranty service is requested in order to obtain coverage.
What Is Not Covered
This limited warranty does not cover the following:
•Routine maintenance items
•Adjustments
•Normal wear and tear
•Damage caused by abuse
•Abnormal use
•Use of a propeller or gear ratio that does not allow the engine to run in its recommended RPM range (see the Operation,
Maintenance & Warranty manual)
•Operation of the product in a manner inconsistent with the recommended operation and duty cycle section of the Operation,
Maintenance & Warranty manual
•Neglect
•Accident
•Submersion
•Improper installation (proper installation specifications and techniques are set forth in the installation instructions for the
product)
•Improper service
•Use of an accessory or part that was not manufactured or sold by Mercury Marine and that damages the Mercury product
•Jet pump impellers and liners
•Operation with fuels, oils, or lubricants that are not suitable for use with the product (see the Operation, Maintenance &
Warranty manual)
•Alteration or removal of parts
•Water entering the engine through the fuel intake, air intake, or exhaust system or damage to the product from insufficient
cooling water caused by blockage of the cooling system by a foreign body
•Running the engine out of water
•Mounting the engine too high on the transom
•Operating the boat with the engine over trimmed
Use of the product for racing or other competitive activity, or operating with a racing‑type lower unit at any point, even by a
previous owner of the product, voids the warranty. Expenses related to haul‑out, launch, towing, storage, telephone, rental,
inconvenience, slip fees, insurance coverage, loan payments, loss of time, loss of income, or any other type of incidental or
consequential damages are not covered by this warranty. Also, expenses associated with the removal or replacement of boat
partitions or other material in order to gain access to the product are not covered by this warranty. No individual or entity,
including Mercury Marine authorized dealers, has been given authority by Mercury Marine to make any affirmation,
representation, or warranty regarding the product, other than those contained in this limited warranty. If such affirmation,
representation, or warranty is made, it shall not be enforceable against Mercury Marine.
90-8M0074352 eng OCTOBER 2012Page 5
Section 1 - Warranty
DISCLAIMERS AND LIMITATIONS
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
DISCLAIMED. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN
DURATION TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE
EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. SOME STATES/COUNTRIES DO NOT ALLOW FOR THE
DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE. AS A RESULT, THEY MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH
VARY FROM STATE TO STATE AND COUNTRY TO COUNTRY.
3‑Year Limited Warranty Against Corrosion
3‑YEAR LIMITED WARRANTY AGAINST CORROSION
What Is Covered
Mercury Marine warrants that each new Mercury, Mariner, Mercury Racing, Sport Jet, M2 Jet Drive,
Tracker by Mercury Marine Outboard, MerCruiser Inboard or Sterndrive engine (Product) will not be
rendered inoperative as a direct result of corrosion for the period of time described below.
Duration of Coverage
This limited corrosion warranty provides coverage for three (3) years from either the date the product is
first sold, or the date on which the product is first put into service, whichever occurs first. The repair and
replacement of parts, or the performance of service under this warranty does not extend the life of this
warranty beyond its original expiration date. Unexpired warranty coverage can be transferred to
subsequent (noncommercial use) purchaser upon proper re‑registration of the product. Warranty
coverage is terminated for used product repossessed from a retail customer, purchased at auction, from
a salvage yard, or from an insurance company that obtained the product as a result of an insurance
claim.
Condition That Must Be Met in Order to Obtain Warranty Coverage
Warranty coverage is available only to retail customers that purchase from a dealer authorized by
Mercury Marine to distribute the product in the country in which the sale occurred, and then only after the
Mercury Marine specified pre‑delivery inspection process is completed and documented. Warranty
coverage becomes available upon proper registration of the product by the authorized dealer. Corrosion
prevention devices specified in the Operation, Maintenance & Warranty manual must be in use on the
boat, and routine maintenance outlined in the Operation, Maintenance & Warranty manual must be timely
performed (including without limitation the replacement of sacrificial anodes, use of specified lubricants,
and touch‑up of nicks and scratches) in order to maintain warranty coverage. Mercury Marine reserves
the right to make warranty coverage contingent upon proof of proper maintenance.
What Mercury Will Do
Mercury's sole and exclusive obligation under this warranty is limited to, at our option, repairing a
corroded part, replacing such part or parts with new or Mercury Marine certified re‑manufactured parts, or
refunding the purchase price of the Mercury product. Mercury reserves the right to improve or modify
products from time to time without assuming an obligation to modify products previously manufactured.
How to Obtain Warranty Coverage
The customer must provide Mercury with a reasonable opportunity to repair, and reasonable access to
the product for warranty service. Warranty claims shall be made by delivering the product for inspection
to a Mercury dealer authorized to service the product. If purchaser cannot deliver the product to such a
dealer, written notice must be given to Mercury. We will then arrange for the inspection and any covered
repair. Purchaser in that case shall pay for all related transportation charges and/or travel time. If the
service provided is not covered by this warranty, purchaser shall pay for all related labor and material,
and any other expenses associated with that service. Purchaser shall not, unless requested by Mercury,
ship the product or parts of the product directly to Mercury. Proof of registered ownership must be
presented to the dealer at the time warranty service is requested in order to obtain coverage.
What Is Not Covered
Page 690-8M0074352 eng OCTOBER 2012
Section 1 - Warranty
This limited warranty does not cover electrical system corrosion; corrosion resulting from damage,
corrosion which causes purely cosmetic damage, abuse or improper service; corrosion to accessories,
instruments, steering systems; corrosion to factory installed jet drive unit; damage due to marine growth;
product sold with less than a one year limited Product warranty; replacement parts (parts purchased by
the Customer); products used in a commercial application. Commercial use is defined as any work or
employment related use of the product, or any use of the product which generates income, for any part of
warranty period, even if the product is only occasionally used for such purposes.
4‑Year Limited Corrosion Warranty: SeaCore Sterndrive Models with Gas
Engines
4‑YEAR LIMITED CORROSION WARRANTY: SEACORE STERNDRIVE MODELS WITH GAS ENGINES
What Is Covered
Mercury Marine warrants that each new MerCruiser SeaCore engine, transom, and sterndrive package
will not be rendered inoperative as a direct result of corrosion for the period of time described below.
Duration of Coverage
This limited corrosion warranty provides coverage for four (4) years from either the date on which the
MerCruiser SeaCore engine, transom, and sterndrive package is first sold or the date on which it is first
put into service, whichever occurs first. The repair or replacement of parts or the performance of service
under this warranty does not extend the life of this warranty beyond its original expiration date. Unexpired
warranty coverage can be transferred to a subsequent (noncommercial‑use) purchaser upon proper
reregistration of the product. Warranty coverage is terminated for used product obtained in any of the
following ways:
•Repossession from a retail customer
•Purchase at auction
•Purchase from a salvage yard
•Purchase from an insurance company that obtained the product as a result of an insurance claim
Condition That Must Be Met in Order to Obtain Warranty Coverage
Warranty coverage is available only to retail customers that purchase from a dealer authorized by
Mercury Marine to distribute the product in the country in which the sale occurred, and then only after the
pre‑delivery inspection process specified by Mercury Marine is completed and documented. Warranty
coverage becomes available upon proper registration of the product by the authorized dealer.
Corrosion‑prevention devices specified in the Operation, Maintenance & Warranty manual must be in use
on the boat, and routine maintenance outlined in the Operation, Maintenance & Warranty manual must
be performed according to the maintenance schedule in the Operation, Maintenance & Warranty manual
(including without limitation the replacement of sacrificial anodes, use of specified lubricants, and
touch‑up of nicks and scratches) in order to maintain warranty coverage. Mercury Marine reserves the
right to make warranty coverage contingent upon proof of proper maintenance.
What Mercury Marine Will Do
Mercury's sole and exclusive obligation under this warranty is limited to, at our option, repairing a
corroded part, replacing such part or parts with new or Mercury Marine certified remanufactured parts, or
refunding the purchase price of the Mercury product. Mercury reserves the right to improve or modify
products from time to time without assuming an obligation to modify products previously manufactured.
How to Obtain Warranty Coverage
The customer must provide Mercury Marine with a reasonable opportunity to repair and reasonable
access to the product for warranty service. Warranty claims shall be made by delivering the product for
inspection to a Mercury Marine dealer authorized to service the product. If the purchaser cannot deliver
the product to such a dealer, written notice must be given to Mercury Marine. Mercury Marine will then
arrange for the inspection and any covered repair. The purchaser in that case shall pay for all related
transportation charges and/or travel time. If the service provided is not covered by this warranty, the
purchaser shall pay for all related labor and material, and any other expenses associated with that
service. The purchaser shall not, unless requested by Mercury Marine, ship the product or parts of the
product directly to Mercury Marine. Proof of registered ownership must be presented to the dealer at the
time warranty service is requested in order to obtain coverage.
What Is Not Covered
90-8M0074352 eng OCTOBER 2012Page 7
Section 1 - Warranty
FAMILY:
XXXXXXXXXXXX
EMISSION CONTROL INFORMATION
NOT FOR SALE IN US
THIS ENGINE IS SOLELY FOR EXPORT AND IS THEREFORE EXEMPT
UNDER 40 CFR 1068.230 FROM U.S. EMISSION STANDARDS AND
RELATED REQUIREMENTS. REFER TO THE OWNERS MANUAL
FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
XXXXXXXX
SERIAL #:
DOM: MMM YYYY
DISP: X.XL
ECIEXEMP
0575
CO FEL : XXX g/kWh
POWER XXX kW :
HC+NOx FEL : XX.X g/kWh
abc
e
f
g
d
44881
This limited warranty does not cover the following:
•Electrical system corrosion
•Corrosion resulting from damage
•Corrosion that causes purely cosmetic damage
•Abuse or improper service
•Corrosion to accessories, instruments, and steering systems
•Corrosion to a factory‑installed jet drive unit
•Damage due to marine growth
•Replacement parts (parts purchased by the customer)
•Product sold with less than a one‑year limited product warranty
•Products used in a commercial application. Commercial use is defined as any work or employment
related use of the product, or any use of the product which generates income, for any part of
warranty period, even if the product is only occasionally used for such purposes.
Emission Control Warranty Information
Important Information
To identify the applicable emission control warranty coverage for a particular product, refer to the Emission ControlInformation label affixed to the engine.
Engines designated as exempt from either Federal EPA or California emission control regulations are not covered by a
separate emission control component warranty. The product's Mercury MerCruiser manufacturer's warranty is not affected by
the engine's designation under Federal EPA or California emission control regulations.
For a list of typical emission control related engine components, refer to Emission Control System Components in the
warranty section of your owner's manual.
Emission Control Information Label
A tamper‑resistant emission control information (ECI) label is affixed to the engine in a visible location at the time of
manufacture by Mercury MerCruiser. Please note that the low emissions certification will not affect the fit, function, or
performance of the engine. Boatbuilders and dealers may not remove the label or the part it is affixed to before sale. If
modifications are necessary, contact Mercury MerCruiser about the availability of replacement decals before proceeding. In
addition to the required emissions statement, the label lists the engine serial number, family, applicable emission standard, date
of manufacture (month, year), and engine displacement.
a - Applicable standard
b - Engine serial number
c - Engine family name
d - Hydrocarbons plus oxides of nitrogen family
emission limit
e - Date of manufacture
f - Engine displacement, engine power
g - Carbon monoxide family emission limit
IMPORTANT: A CE mark in the lower right corner of the Emission Control Information label indicates that an EU Declaration of
Conformance applies. Refer to the front page of this manual for further information.
IMPORTANT: Engines designated as exempt from either Federal EPA or California emission control regulations are not
covered by a separate emission control component warranty. The product's Mercury MerCruiser manufacturer's warranty is not
affected by the engine's designation under Federal EPA or California emission control regulations.
Page 890-8M0074352 eng OCTOBER 2012
Section 1 - Warranty
FAMILY:
XXXXXXXXXXXX
EMISSION CONTROL INFORMATION
NOT FOR SALE IN US
THIS ENGINE IS SOLELY FOR EXPORT AND IS THEREFORE EXEMPT
UNDER 40 CFR 1068.230 FROM U.S. EMISSION STANDARDS AND
RELATED REQUIREMENTS. REFER TO THE OWNERS MANUAL
FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
XXXXXXXX
SERIAL #:
DOM: MMM YYYY
DISP: X.XL
ECIEXEMP
0575
CO FEL : XXX g/kWh
POWER XXX kW :
HC+NOx FEL : XX.X g/kWh
44880
ECI LabelStandard of Compliance
Indicates a marine engine for export and is exempt under 40
CFR 1068.255 from United States EPA exhaust emission
regulations for 2010.
This marine engine is not for sale in U.S.
Owner Responsibility
The operator must have routine engine maintenance performed to maintain emission levels within prescribed certification
standards.
The operator may not modify the engine in any manner that alters the horsepower or allows emissions levels to exceed factory
specifications.
Warranty Policy—Australia and New Zealand
MerCruiser Limited Warranty—Australia and New Zealand Policy
This Limited Warranty is given by Marine Power International Pty Ltd ACN 003 100 007 of 41–71 Bessemer Drive, Dandenong
South, Victoria 3175 Australia (telephone (61) (3) 9791 5822), e‑mail: merc_info@mercmarine.com.
What is Covered
Mercury Marine warrants its new products to be free of defects in material and workmanship during the period described below.
The benefits to the consumer given by the warranty are in addition to other rights and remedies of the consumer under a law in
relation to the goods or services to which the warranty relates.
Guarantees Under Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
Duration of Coverage for This Limited Warranty
You are only entitled to claim this Limited Warranty for defects which appear during the relevant warranty period (see the
following). Your claim must also be received by us before the warranty period expires.
The warranty period begins on the date the product is first sold to a recreational use retail purchaser or the date on which the
product is first put into service, whichever occurs first. The repair or replacement of parts or the performance of service under
this warranty does not extend the life of this limited warranty beyond its original expiration date. The warranty period is specific
to the model covered. Refer to your model for the base coverage period.
Warranty Period for Commercial Use
The warranty period begins on the date the product is first sold to a commercial use retail purchaser or the date on which the
product is first put into service, whichever occurs first. Commercial users of these products receive warranty coverage for either
one (1) year from the date of first retail sale or the accumulation of 500 hours of operation, whichever occurs first. Commercial
use is defined as any work related or employment related use of the product, or any use of the product that generates income
for any part of the warranty period, even if the product is only occasionally used for such purposes. The repair or replacement
of parts or the performance of service under this warranty does not extend the life of this warranty beyond its original expiration
date.
Transfer of Coverage
Unexpired warranty coverage can be transferred to a subsequent recreational use customer upon proper registration of the
product. Unexpired warranty coverage cannot be transferred either to or from a commercial use customer.
Termination of Coverage
Warranty coverage under this Limited Warranty is terminated for used product obtained in any of the following ways:
•Purchased from an insurance company that obtained the product as a result of an insurance claim
•Purchased from a salvage yard
•Repossession from a retail customer
•Purchased at an auction
Conditions That Must Be Met to Obtain Warranty Coverage
Warranty coverage under this Limited Warranty is available only to retail customers that purchase from a dealer authorized by
Mercury Marine to distribute the product in the country in which the sale occurred, and then only after the predelivery inspection
process specified by Mercury Marine is completed and documented. Warranty coverage becomes available upon proper
registration of the product by the authorized dealer. Inaccurate warranty registration information regarding recreational use or
subsequent change of use from recreational to commercial (unless properly registered) may void the warranty at the sole
discretion of Mercury Marine. Routine maintenance must be performed according to the maintenance schedule in the
Operation, Maintenance, and Warranty manual in order to obtain warranty coverage. Mercury Marine reserves the right to
make any warranty coverage contingent upon proof of proper maintenance.
What Mercury Will Do
Mercury Marine's sole and exclusive obligation under this Limited Warranty is limited to, at our option, repairing a defective part,
replacing such part or parts with new or Mercury Marine certified remanufactured parts, or refunding the purchase price of the
Mercury Marine product. Mercury Marine reserves the right to improve or modify products from time to time without assuming
an obligation to modify products previously manufactured.
How to Obtain Warranty Coverage Under This Limited Warranty
The customer must provide Mercury Marine with a reasonable opportunity to repair and reasonable access to the product for
warranty service. Warranty claims shall be made by delivering the product for inspection to a Mercury Marine dealer authorized
to service the product. A list of dealers and their contact details is available at http://www.mercurymarine.com.au/home.aspx
the purchaser cannot deliver the product to such a dealer, written notice must be given to Mercury Marine at the address shown
above. Mercury Marine will then arrange for the inspection and any covered repair. This Limited Warranty will not cover the
purchaser for all related transportation charges and travel time. If the service provided is not covered by this limited warranty,
the purchaser shall pay for all related labor and material and any other expenses associated with that service, provided that a
consumer will not be obligated to pay where the service has been carried out to remedy a failure of an acceptable quality
guarantee which is binding on Mercury Marine under the Australian Consumer Law. The purchaser shall not, unless requested
by Mercury Marine, ship the product or parts of the product directly to Mercury Marine. Proof of registered ownership must be
presented to the dealer at the time warranty service is requested in order to obtain coverage under this Limited Warranty.
. If
What is Not Covered
This limited warranty does not cover the following:
•Operating the boat with the engine over trimmed
•Routine maintenance items
•Adjustments
Page 1090-8M0074352 eng OCTOBER 2012
Section 1 - Warranty
•Normal wear and tear
•Damage caused by abuse
•Abnormal use
•Use of a propeller or gear ratio that does not allow the engine to run in its recommended RPM range. Refer to the
Operation, Maintenance, and Warranty manual.
•Operation of the product in a manner inconsistent with the recommended operation and duty cycle section of the
Operation, Maintenance, and Warranty manual.
•Neglect
•Accident
•Submersion
•Improper installation (proper installation specifications and techniques are set forth in the installation instructions for the
product)
•Improper service
•Use of an accessory or part that was not manufactured or sold by Mercury Marine that causes damage to the Mercury
product
•Jet pump impellers and liners
•Operation with fuels, oils, or lubricants that are not suitable for use with the product. Refer to the Operation, Maintenance,
and Warranty manual.
•Alteration or removal of parts
•Water entering the engine through the fuel intake, air intake, or exhaust system or damage to the product from insufficient
cooling water caused by blockage of the cooling system by a foreign body
•Running the engine out of water
•Mounting the engine too high on the transom
Use of the product for racing or other competitive activity, or operating with a racing‑type lower unit at any point, even by a
previous owner of the product, voids this limited warranty. Expenses related to haul‑out, launch, towing, storage, telephone,
rental, inconvenience, slip fees, insurance coverage, loan payments, loss of time, loss of income, or any other type of incidental
or consequential damages are not covered by this limited warranty. Also, expenses associated with the removal or replacement
of boat partitions or other material in order to gain access to the product are not covered by this limited warranty. No individual
or entity, including Mercury Marine authorized dealers, has been given authority by Mercury Marine to make any affirmation,
representation, or warranty regarding the product, other than those contained in this limited warranty. If such affirmation,
representation, or warranty is made, it shall not be enforceable against Mercury Marine.
Expense of Claiming This Limited Warranty
This Limited Warranty does not cover any expenses you may incur claiming the warranty.
DISCLAIMERS AND LIMITATIONS
EXCEPT FOR APPLICABLE GUARANTEES AND OTHER RIGHTS AND REMEDIES THAT A CONSUMER MAY HAVE
UNDER THE AUSTRALIAN CONSUMER LAW OR OTHER LAW IN RELATION TO WHICH THE PRODUCTS RELATE,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
EXPRESSLY DISCLAIMED. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES
ARE LIMITED IN DURATION TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL
DAMAGES ARE EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY.
Transfer of Warranty—Australia and New Zealand Policy
The limited warranty is transferable to a subsequent purchaser, but only for the remainder of the unused portion of the limited
warranty. This will not apply to products used for commercial applications.
To transfer the warranty to the subsequent owner, send or fax a copy of the Bill of Sale or Purchase Agreement, new owner’s
name, address, and hull identification number (HIN) to Mercury Marine’s Warranty Registration Department. In Australia and
New Zealand, mail to:
90-8M0074352 eng OCTOBER 2012Page 11
Section 1 - Warranty
Mercury Marine
Attn: Warranty Registration Department
Brunswick Asia Pacific Group
Private Bag 1420
Dandenong South, Victoria 3164
Australia
Upon processing the transfer of warranty, Mercury Marine will send registration verification to the new owner of the product by
mail. There is no charge for this service.
You may change your address at any time, including at the time of the warranty claim, by calling Mercury Marine or sending a
letter or fax with your name, old address, new address, and hull identification number (HIN) to Mercury Marine’s Warranty
Registration Department.
Global Warranty Application Charts (8.2 MAG/H.O./Non‑ECT)
MAG Sterndrive Series Non‑Emissions Control (Recreational Use)
Recreational Application: Standard Limited Warranty by Region and Boat Manufacturer
All Engines (MAG, High Output)
Region
Americas
(Excluding Brazil)
Latin America1 Year2 Years
Brazil2 Years2 Years
Europe, CIS, South Africa2 Years3 Years
Middle East, Africa1 Year2 Years
Australia, New Zealand2 Years2 Years
Japan
South Pacific2 Years2 Years
Other Asian Regions1 Year1 Year
Non‑Installation Quality Certified Boat
Manufacturer
1 Year2 Years
2 Years
Starting 01/01/2013
Installation Quality Certified Boat
Manufacturer
2 Years
Starting 01/01/2013
MAG Sterndrive Series Non‑Emissions Control (Commercial Use)
Commercial Application: Standard Limited Warranty by Region and Boat Manufacturer
All Engines (MAG, High Output)
Region
Americas
(Excluding Brazil)
Latin America1 Year or 500 Hours1 Year or 500 Hours
Brazil1 Year or 500 Hours1 Year or 500 Hours
Europe, CIS, South Africa1 Year or 500 Hours1 Year or 500 Hours
Middle East, Africa1 Year or 500 Hours1 Year or 500 Hours
Australia, New Zealand1 Year or 500 Hours1 Year or 500 Hours
Japan1 Year or 500 Hours1 Year or 500 Hours
South Pacific1 Year or 500 Hours1 Year or 500 Hours
Other Asian Regions1 Year or 500 Hours1 Year or 500 Hours
Page 1290-8M0074352 eng OCTOBER 2012
Non‑Installation Quality Certified Boat
Manufacturer
1 Year1 Year
Installation Quality Certified Boat
Manufacturer
Section 1 - Warranty
MAG Sterndrive Series Non‑Emissions Control (Government Use)
Government Application: Standard Limited Warranty by Region and Boat Manufacturer
All Engines (MAG, High Output)
Region
Americas
(Excluding Brazil)
Latin America1 Year or 500 Hours1 Year or 500 Hours
Brazil1 Year or 500 Hours1 Year or 500 Hours
Europe, CIS, South Africa1 Year or 500 Hours1 Year or 500 Hours
Middle East, Africa1 Year or 500 Hours1 Year or 500 Hours
Australia, New Zealand1 Year or 500 Hours1 Year or 500 Hours
Japan1 Year or 500 Hours1 Year or 500 Hours
South Pacific1 Year or 500 Hours1 Year or 500 Hours
Other Asian Regions1 Year or 500 Hours1 Year or 500 Hours
Non‑Installation Quality Certified Boat
Manufacturer
1 Year1 Year
Installation Quality Certified Boat
Manufacturer
MAG Sterndrive Series Non‑Emissions Control (Recreational Use—Corrosion)
Recreational Application: Standard Limited Corrosion Warranty by Region for All Boat Manufacturers
RegionAll Engines (MAG, High Output)
Americas
(Excluding Brazil)
Latin America3 Years
Brazil2 Years
Europe, CIS, South Africa3 Years
Middle East, Africa3 Years
Australia, New Zealand3 Years
Japan
South Pacific2 Years
Other Asian Regions1 Year
3 Years
2 Years
Starting 01/01/2013
90-8M0074352 eng OCTOBER 2012Page 13
Section 1 - Warranty
MAG Sterndrive Series Non‑Emissions Control (Commercial Use—Corrosion)
Commercial Application: Standard Limited Corrosion Warranty by Region for All Boat Manufacturers
RegionAll Engines (MPI, High Output)
Americas
(Excluding Brazil)
Latin America1 Year or 500 Hours
Brazil1 Year or 500 Hours
Europe, CIS, South Africa1 Year or 500 Hours
Middle East, Africa1 Year or 500 Hours
Australia, New Zealand1 Year or 500 Hours
Japan1 Year or 500 Hours
South Pacific1 Year or 500 Hours
Other Asian Regions1 Year or 500 Hours
1 Year
MAG Sterndrive Series Non‑Emissions Control (Government Use—Corrosion)
Government Application: Standard Limited Corrosion Warranty by Region for All Boat Manufacturers
RegionAll Engines (MAG, High Output)
Americas
(Excluding Brazil)
Latin America1 Year or 500 Hours
Brazil1 Year or 500 Hours
Europe, CIS, South Africa1 Year or 500 Hours
Middle East, Africa1 Year or 500 Hours
Australia, New Zealand1 Year or 500 Hours
Japan1 Year or 500 Hours
South Pacific1 Year or 500 Hours
Other Asian Regions1 Year or 500 Hours
3 Years
Page 1490-8M0074352 eng OCTOBER 2012
Section 1 - Warranty
Global Warranty Application Charts (8.2 MAG/H.O./SeaCore/Non‑ECT)
SeaCore Sterndrive Series Non‑Emissions Control (Recreational Use)
Recreational Application: Standard Limited Warranty by Region and Boat Manufacturer
All Engines (MPI, MAG, High Output)
Region
Americas
(Excluding Brazil)
Latin America3 Years4 Years
Brazil2 Years2 Years
Europe, CIS, South Africa3 Years4 Years
Middle East, Africa2 Years3 Years
Australia, New Zealand3 Years3 Years
Japan
South Pacific2 Years2 Years
Other Asian Regions1 Year1 Year
Non‑Installation Quality Certified Boat
Manufacturer
3 Years4 Years
2 Years
Starting 01/01/2013
Installation Quality Certified Boat
Manufacturer
2 Years
Starting 01/01/2013
SeaCore Sterndrive Series Non‑Emissions Control (Commercial Use)
Commercial Application: Standard Limited Warranty by Region and Boat Manufacturer
All Engines (MPI, MAG, High Output)
Region
Americas
(Excluding Brazil)
Latin America1 Year or 500 Hours1 Year or 500 Hours
Brazil1 Year or 500 Hours1 Year or 500 Hours
Europe, CIS, South Africa1 Year or 500 Hours1 Year or 500 Hours
Middle East, Africa1 Year or 500 Hours1 Year or 500 Hours
Australia, New Zealand1 Year or 500 Hours1 Year or 500 Hours
Japan1 Year or 500 Hours1 Year or 500 Hours
South Pacific1 Year or 500 Hours1 Year or 500 Hours
Other Asian Regions1 Year or 500 Hours1 Year or 500 Hours
Non‑Installation Quality Certified Boat
Manufacturer
1 Year1 Year
Installation Quality Certified Boat
Manufacturer
90-8M0074352 eng OCTOBER 2012Page 15
Section 1 - Warranty
SeaCore Sterndrive Series Non‑Emissions Control (Government Use)
Government Application: Standard Limited Warranty by Region and Boat Manufacturer
All Engines (MPI, MAG, High Output)
Region
Americas
(Excluding Brazil)
Latin America1 Year or 500 Hours1 Year or 500 Hours
Brazil1 Year or 500 Hours1 Year or 500 Hours
Europe, CIS, South Africa1 Year or 500 Hours1 Year or 500 Hours
Middle East, Africa1 Year or 500 Hours1 Year or 500 Hours
Australia, New Zealand1 Year or 500 Hours1 Year or 500 Hours
Japan1 Year or 500 Hours1 Year or 500 Hours
South Pacific1 Year or 500 Hours1 Year or 500 Hours
Other Asian Regions1 Year or 500 Hours1 Year or 500 Hours
Non‑Installation Quality Certified Boat
Manufacturer
1 Year1 Year
Installation Quality Certified Boat
Manufacturer
SeaCore Sterndrive Series Non‑Emissions Control (Recreational Use—Corrosion)
Recreational Application: Standard Limited Corrosion Warranty by Region for All Boat Manufacturers
RegionAll Engines (MPI, MAG, High Output)
Americas
(Excluding Brazil)
Latin America4 Years
Brazil2 Years
Europe, CIS, South Africa4 Years
Middle East, Africa4 Years
Australia, New Zealand4 Years
Japan
South Pacific2 Years
Other Asian Regions1 Year
4 Years
2 Years
Starting 01/01/2013
Page 1690-8M0074352 eng OCTOBER 2012
Section 1 - Warranty
SeaCore Sterndrive Series Non‑Emissions Control (Commercial Use—Corrosion)
Commercial Application: Standard Limited Corrosion Warranty by Region for All Boat Manufacturers
RegionAll Engines (MPI, MAG, High Output)
Americas
(Excluding Brazil)
Latin America1 Year or 500 Hours
Brazil1 Year or 500 Hours
Europe, CIS, South Africa1 Year or 500 Hours
Middle East, Africa1 Year or 500 Hours
Australia, New Zealand1 Year or 500 Hours
Japan1 Year or 500 Hours
South Pacific1 Year or 500 Hours
Other Asian Regions1 Year or 500 Hours
1 Year
SeaCore Sterndrive Series Non‑Emissions Control (Government Use—Corrosion)
Government Application: Standard Limited Corrosion Warranty by Region for All Boat Manufacturers
RegionAll Engines (MPI, MAG, High Output)
Americas
(Excluding Brazil)
Latin America1 Year or 500 Hours
Brazil1 Year or 500 Hours
Europe, CIS, South Africa1 Year or 500 Hours
Middle East, Africa1 Year or 500 Hours
Australia, New Zealand1 Year or 500 Hours
Japan1 Year or 500 Hours
South Pacific1 Year or 500 Hours
Other Asian Regions1 Year or 500 Hours
3 Years
Emission Control Warranty Information
Important Information
To identify the applicable emission control warranty coverage for a particular product, refer to the Emission ControlInformation label affixed to the engine.
Engines designated as exempt from either Federal EPA or California emission control regulations are not covered by a
separate emission control component warranty. The product's Mercury MerCruiser manufacturer's warranty is not affected by
the engine's designation under Federal EPA or California emission control regulations.
For a list of typical emission control related engine components, refer to Emission Control System Components in the
warranty section of your owner's manual.
90-8M0074352 eng OCTOBER 2012Page 17
Section 1 - Warranty
FAMILY:
XXXXXXXXXXXX
EMISSION CONTROL INFORMATION
NOT FOR SALE IN US
THIS ENGINE IS SOLELY FOR EXPORT AND IS THEREFORE EXEMPT
UNDER 40 CFR 1068.230 FROM U.S. EMISSION STANDARDS AND
RELATED REQUIREMENTS. REFER TO THE OWNERS MANUAL
FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
XXXXXXXX
SERIAL #:
DOM: MMM YYYY
DISP: X.XL
ECIEXEMP
0575
CO FEL : XXX g/kWh
POWER XXX kW :
HC+NOx FEL : XX.X g/kWh
44880
FAMILY:
XXXXXXXXXXXX
EMISSION CONTROL INFORMATION
NOT FOR SALE IN US
THIS ENGINE IS SOLELY FOR EXPORT AND IS THEREFORE EXEMPT
UNDER 40 CFR 1068.230 FROM U.S. EMISSION STANDARDS AND
RELATED REQUIREMENTS. REFER TO THE OWNERS MANUAL
FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
XXXXXXXX
SERIAL #:
DOM: MMM YYYY
DISP: X.XL
ECIEXEMP
0575
CO FEL : XXX g/kWh
POWER XXX kW :
HC+NOx FEL : XX.X g/kWh
abc
e
f
g
d
44881
Emission Control Information Label
A tamper‑resistant emission control information (ECI) label is affixed to the engine in a visible location at the time of
manufacture by Mercury MerCruiser. Please note that the low emissions certification will not affect the fit, function, or
performance of the engine. Boatbuilders and dealers may not remove the label or the part it is affixed to before sale. If
modifications are necessary, contact Mercury MerCruiser about the availability of replacement decals before proceeding. In
addition to the required emissions statement, the label lists the engine serial number, family, applicable emission standard, date
of manufacture (month, year), and engine displacement.
a - Applicable standard
b - Engine serial number
c - Engine family name
d - Hydrocarbons plus oxides of nitrogen family
emission limit
e - Date of manufacture
f - Engine displacement, engine power
g - Carbon monoxide family emission limit
IMPORTANT: A CE mark in the lower right corner of the Emission Control Information label indicates that an EU Declaration of
Conformance applies. Refer to the front page of this manual for further information.
IMPORTANT: Engines designated as exempt from either Federal EPA or California emission control regulations are not
covered by a separate emission control component warranty. The product's Mercury MerCruiser manufacturer's warranty is not
affected by the engine's designation under Federal EPA or California emission control regulations.
ECI Label
Standard of Compliance
Indicates a marine engine for export and is exempt under 40
CFR 1068.255 from United States EPA exhaust emission
regulations for 2010.
This marine engine is not for sale in U.S.
Owner Responsibility
The operator must have routine engine maintenance performed to maintain emission levels within prescribed certification
standards.
The operator may not modify the engine in any manner that alters the horsepower or allows emissions levels to exceed factory
specifications.
Page 1890-8M0074352 eng OCTOBER 2012
Section 2 - Getting to Know Your Power Package
Table of Contents
Section 2 - Getting to Know Your Power Package
Additional Operation Instructions for Axius Systems ........... 20
Additional Operation Instructions for Axius Systems
If your boat has DTS engines equipped with an Axius system, refer also to the Axius Operation Manual included with the
boat.
Identification
The serial numbers are the manufacturer's key to numerous details which apply to your MerCruiser power package. When
contacting MerCruiser about service, always specify model and serial numbers.
Information Decal
The information decal is located on the coolant reservoir.
a - Smartphone link
b - Service point information
c - Engine serial number
d - Transom serial number
e - Sterndrive serial number
f - Specifications
Smartphone Link
Scan the smartphone link with a smartphone for access to quick product information.
Smartphone link
Page 2090-8M0074352 eng OCTOBER 2012
Section 2 - Getting to Know Your Power Package
33533
44426
44433
Bravo Sterndrive Serial Number and Identification
The Bravo sterndrive serial number, gear ratio, model number, and bar code are embedded in the ground plate on the port side
of the sterndrive.
Bravo sterndrive information on ground plate
The serial number is also stamped on the driveshaft housing behind the back cover. This is used as a permanent reference for
authorized MerCruiser dealers.
Bravo sterndrive serial number stamping
Bravo Transom Serial Number
The Bravo transom serial number is stamped in the U‑bolt plate of the Bravo transom assembly.
Serial number location on U-bolt plate
90-8M0074352 eng OCTOBER 2012Page 21
Section 2 - Getting to Know Your Power Package
44425
RUN
OFF
74608
a
b
c
The serial number is also stamped on the gimbal housing. This is used as a permanent reference for authorized MerCruiser
dealers.
Serial number location on gimbal housing
Lanyard Stop Switch
The purpose of a lanyard stop switch is to turn off the engine when the operator moves outside the operator's position (as in
accidental ejection from the operator's position).
a - Stop switch
b - Lanyard
c - Clips to the operator
Accidental ejections, such as falling overboard, are more likely to occur in:
•low‑sided sport boats
•bass boats
•high‑performance boats
Accidental ejections can also occur from:
•poor operating practices
•sitting on the seat or gunwale at planing speeds
•standing at planing speeds
•operating at planing speeds in shallow or obstacle infested waters
•releasing your grip on the steering wheel that is pulling in one direction
•consuming alcohol or drugs
•high‑speed boating maneuvers
The lanyard is a cord usually between 122 and 152 cm (4 and 5 ft) in length when stretched out, with an element on one end
made to be inserted into the switch and a snap on the other end for attaching to the operator. The lanyard is coiled to make its
at‑rest condition as short as possible to minimize the likelihood of lanyard entanglement with nearby objects. Its stretched‑out
length is made to minimize the likelihood of accidental activation should the operator choose to move around in an area close
to the normal operator's position. If it is desired to have a shorter lanyard, wrap the lanyard around the operator's wrist or leg, or
tie a knot in the lanyard.
Activation of the lanyard stop switch will stop the engine immediately, but the boat will continue to coast for some distance
depending upon the velocity and degree of any turn at shut down. However, the boat will not complete a full circle. While the
boat is coasting, it can cause injury to anyone in the boat's path as seriously as the boat would when under power.
We strongly recommend that other occupants be instructed on proper starting and operating procedures should they be
required to operate the engine in an emergency (if the operator is accidentally ejected).
WARNING
!
If the operator falls out of the boat, stop the engine immediately to reduce the possibility of serious injury or death from being
struck by the boat. Always properly connect the operator to the stop switch using a lanyard.
Page 2290-8M0074352 eng OCTOBER 2012
Loading...
+ 102 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.