Merco / Savory HMC-1, HMC-1X, HMC-2, HMC-2X General Manual
Bid Spe cifi cati ons:
The H eate d Me rchandising Cab in et shall be
Me rco mode l ______ rated at 144 0 watts,
120 vol ts, single phas e AC.
Heated Merchandising Cabinet
Model
HM C- 1 HM C- 1X HM C- 2 HM C- 2X
Standard Features
•
Fluorescent lights help showcase food product
• Tempered glass door and side panels provide
maximum heat retention and allow for full
cabinet display
• Stainless water reser voir provides all day
moisture
• Low-water protection prevents heating
element burnout and alerts operator to low
water condition
• Large access doors are field reversible and will
accept a 19” (483 mm) diameter pizza pan
Heated Merchandising Cabinet
Description
The Me rco Heated M er ch an di si ng
Cabinet offers a uniqu e co nc ept in food
holding and di sp la y. Balancing a prec is e
combination of h ea t and hu mi di ty, Me rco
Heated Merchandi si ng C ab inets in crease
sales and profits by reduc in g wa ste,
maintaining qu al it y, and displaying
foo d with a pp ea ling des ign. Ut ilized in
cafeter ias, c onvenience s to res, schoo ls,
restaurants, and super ma rkets, Me rco
Heated Merchandi si ng C ab inets are a
perf ec t way to merchan di se y ou r hot
foo d items.
Fle xibi lity
A complete ran ge o f ca binet si ze s, doo r
options, and rack ty pes al lo w for pe rfect
merchandising of food produc ts s uch as
pizza, fri ed foo ds, ba ke ry, and mo re.
Our quick recovery heating system a nd
extremely ev en t em pe ra tures throughout
the cabinet el im in ate “h ot spots” and
ensure consistent produc t qualit y and
long hold ti me s, ( 1- 4 ho urs).
Voltage
120 volts, 60 Hz , 14 40 wat ts, 12 a mp s
standard; uses NEMA 5-15 P.
Options
•
Various rack and sign configurations available
Me rc o Guarantee:
Me rco equi pm en t is gua ra nt ee d to b e
free from quality prob le ms i n materi al s
and work manshi p for a pe ri od of on e
(1) year from the da te o f pu rc ha se , or
eighteen (18) mo nt hs f rom the date o f
shipment from fact or y, whichever c om es
first. Me ta l sheath a ir h ea ting e le me nt s
are warranted ag ai ns t bu rnou t an d
breaka ge for t wo (2) years.
Models
HMC -1 HMC -1X HMC -2 HMC -2X
1111 N. Hadley Rd.
P.O. Box 1229
Ft. Wayne, IN 468 01-1229
Tel: 888-417-5462
Fax: 800.285.9 511
www.mercoproduc ts.com
Heated Merchandising Cabinet
27.584
701[ ]
(STD LEG)
28.632
727[ ]
19.385 492[ ]
20.869 530[ ]
10-02-931
NOTES:
1) SEE 10-03-380 FOR ASSEMBLY DRAWING.
2) SEE 10-02-932 CONSTRUCTION DRAWING FOR
HMC-M2 DOOR UNIT.
3) SEE 10-03-395 ASSEMBLY DRAWING FOR
HMC-M2 DOOR UNIT.
4) SEE SHEET 2 FOR WIRING DIAGRAM REFERENCE.
5) STANDARD FDWD CABINET COMES WITH CORNER POST,
DOOR HANDLE & DOOR HINGE EXTRUSIONS IN ANODIZED
ALUMINUM COLOR WITH COLD ROLLED (CR) BASE ASSEMBLY,
CR CONTROL AREA ASSEMBLY & CR HOOD PAINTED BLACK.
6) DOOR OPENING 19 3/4" [502] TALL X 15 3/4" [400] WIDE.
7) WILL ACCEPT 1/2 SHEET PANS.
8) DIMENSIONS IN INCHES [MM]
6 FT. [1829] CORD WITH NEMA 5-15P PLUG
SEE TABLE ON SHEET 2 FOR OPTIONAL CORDS
10-02-931
6) DOOR OPENING 19 3/4" [502] TALL X 15 3/4" [400] WIDE.
7) WILL ACCEPT 1/2 SHEET PANS.
8) DIMENSIONS IN INCHES [MM]
27.584
701[ ]
(STD LEG)
28.632
727[ ]
19.385 492[ ]
20.869 530[ ]
22.003 559[ ]
10-02-932
NOTE:
1) SEE 10-03-395 FOR ASSEMBLY DRAWING.
2) SEE 10-02-931 CONSTRUCTION DRAWING FOR
HMC-M1 DOOR UNIT.
3) SEE 10-03-380 ASSEMBLY DRAWING FOR
HMC-M1 DOOR UNIT.
4) SEE SHEET 2 FOR WIRING DIAGRAM REFERENCE.
5) STANDARD FDWD CABINET COMES WITH CORNER POST,
DOOR HANDLE & DOOR HINGE EXTRUSIONS IN ANODIZED
ALUMINUM COLOR WITH COLD ROLLED (CR) BASE ASSEMBLY,
CR CONTROL AREA ASSEMBLY & CR HOOD PAINTED BLACK.
6) DOOR OPENING 19 3/4" [502] TALL X 15 3/4" [400] WIDE.
7) WILL ACCEPT 1/2 SHEET PANS.
8) DOOR HINGED LEFT OR HINGED RIGHT.
9) DIMENSIONS IN INCHES [MM]
6 FT. [1829] CORD WITH NEMA 5-15P PLUG
SEE TABLE ON SHEET 2 FOR EXPORT CORD
12
10-02-932
6) DOOR OPENING 19 3/4" [502] TALL X 15 3/4" [400] WIDE.
7) WILL ACCEPT 1/2 SHEET PANS.
8) DOOR HINGED LEFT OR HINGED RIGHT.
9) DIMENSIONS IN INCHES [MM]
ITEM#
Display Rack Selection
4-Shelf Multi-Purpose
Rack*
Model FDWD4SMP
Rack Opening:
3.5" (89 mm)
4-Tier Circle Rack
M
odel FDWD4TCR
Rack Opening:
3.25" (83 mm)
Maximum
15" (381 mm)
diameter pans
DIMENSIONS
FDWD-1, FDWD-1X: 19.39"W x 20.89"D x 28.54"H
(492 x 530 x 725 mm).
FDWD-2, FDWD-2X: 19.39"W x 22.02"D x 28.54"H
(492 x 559 x 725 mm).
Cabinet Opening:
FDWD-1, -1X, -2, -2X: 15.75"W x 19.75"H (400 x 502 mm).
VOLTAGE
FDWD-1, -1X, -2, -2X: 120 volts, 60 Hz, 1420 watts, 11.8 amps
(uses NEMA 5-15P).
Export voltages available.
CORD LOCATION
FDWD-1, -1X, -2, -2X:
Facing controls, right-hand side panel, lower right corner.
PLUG CONFIGURATIONS
®
IMPULSE DISPLAY CABINETS
BS-1363CEE 7/7 Schuko
AS-3112
NEMA 5-15P
3-Tier Pretzel Tree
Model FDWD3TPT
Rack Opening:
5.88" (149 mm)
4-Shelf Multi-Purpose
Rack*
Model FDWD4SMP
Rack Opening:
3.5" (89 mm)
BS-1363CEE 7/7 Schuko
ITEM#
5-Shelf Multi-Purpose Rack
Model FSD5SMP
Rack Opening:
2.5" (64 mm)
7-Shelf Multi-Purpose
Rack
Model FSDT7SMP
Rack Opening:
BS-1363CEE 7/7 SchukoNEMA 5-15P
iciency and reduce the
ITEM#
®
HOLDING& DISPLAY CABINETS
.
ShippingWeight
52 kg)
ShippingWeight
.54"H* (569 x 612 x 827 mm).
FSDT – 18.98"W x 23.73"H (482 x 603 mm).
5-Shelf Multi-Purpose Rack
Model FSD5SMP
Rack Opening:
2.5" (64 mm)
7-Shelf Multi-Purpose
Rack
Model FSDT7SMP
Rack Opening:
2.5" (64 mm)
3-Shelf Angle Rack
Model FSDT3SAR
Rack Opening:
3.5" (89 mm)
Rack shelves slant at
15° angle
5-Shelf Angle Rack
Model FSDT5SAR
Rack Opening:
2.5" (64 mm)
3-Tier Circle Rack
Model FSD3TCR
Rack Opening:
4.63" (118 mm)
4-Tier Circle Rack
Model FSDT4TCR
Rack Opening:
4.63" (118 mm)
5-Tier Circle Rack
Model FSDT5TCR
Rack Opening:
3.63" (93 mm)
3-Tier Pan Rack*
Model FSD
3TPR
Rack Opening:
3.5" (89 mm)
4-Tier Pan Rack*
Model FSDT4TPR
Display Rack Selection
BS-1363CEE 7/7 SchukoNEMA 5-15P
WATER QUALITY REQUIREMENTS
Water supply in excess of 3.0 grains of hardness per gallon
(GPG) (.75 grains of hardness per liter) must be treated and
softened before being used. Water containing over 3.0 GPG
(.75 GPL) will decrease the eff
iciency and reduce the
operatinglife of the unit.
Note: Product failure causedby limingor sediment
buildupis not covered underwarranty.
CORD LOCATION
Facing controls, right-hand side panel,
lower right corner.
PLUG CONFIGURATIONS
ITEM#
5-Shelf Multi-Purpose Rack
Model FSD5SMP
Rack Opening:
2.5" (64 mm)
7-Shelf Multi-Purpose
Rack
Model FSDT7SMP
Rack Opening:
2.5" (64 mm)
3-Shelf Angle Rack
Model FSDT3SAR
Rack Opening:
3.5" (89 mm)
Rack shelves slant at
15° angle
5-Shelf Angle Rack
Model FSDT5SAR
Rack Opening:
2.5" (64 mm)
BS-1363CEE 7/7 SchukoNEMA 5-15P
iciency and reduce the
ITEM#
5-Shelf Multi-Purpose Rack
Model FSD5SMP
Rack Opening:
2.5" (64 mm)
7-Shelf Multi-Purpose
Rack
Model FSDT7SMP
Rack Opening:
2.5" (64 mm)
3-Shelf Angle Rack
Model FSDT3SAR
Rack Opening:
3.5" (89 mm)
Rack shelves slant at
15° angle
BS-1363CEE 7/7 SchukoNEMA 5-15P
iciency and reduce the
HMC -1
28.632
727[ ]
(STD LEG)
WATER
FILL
CUP
27.584
701[ ]
19.385 492[ ]
20.869 530[ ]
19.385 492[ ]
HMC -2
WATER
FILL
19.385 492[ ]
CUP
22.003 559[ ]
20.869 530[ ]
19.385 492[ ]
28.632
727[ ]
(STD LEG)
27.584
Rac k Op enin g: 4. 63” (1 18m m)
Rac k Op enin g: 3. 63” (9 3mm )
Model Type Description
HMC-1 1-Door 1-D oor Heated Merchandising Cabinet - Inclu des one (1) rack and one (1) graph ic sign 120 lbs. (54 kg)
HMC-1X 1-Door 1-D oor Motorless Heated Merchandising Cabinet - Includes one (1) rack and one (1) graphic sign 118 lbs. (54 kg)
HMC-2 2-Door 2-D oor Heated Merchandising Cabinet - Inclu des one (1) rack and one (1) graph ic sign 122 lbs. (55 kg)
HMC-2X 2-Door 2-D oor Motorless Heated Merchandising Cabinet - Includes one (1) rack and one (1) graphic sign 120 lbs. (54 kg)
Designs an d specifications subject to change without notice.
1111 N. Hadley Rd.
P.O. Box 1229
Ft. Wayne, IN 468 01-1229
701[ ]
4-Ti er C ircle Rac k
5-Ti er C ircle Rac k
4-Ti er Pa n Ra ck*
Rac k Op enin g: 3. 5” (89 mm)
*Acc omm oda tes hal f-s ize sh eet pa ns
(no t i ncl ude d)
Tel: 888-417-5462
Fax: 800.285.9 511
ELECTRONIC CONTROL BOARD
TEMPERATURE INDICATOR
ON/OFF
SWITCH
ELECTRONIC
CONTROL BOARD
TEMPERATURE &
HUMIDITY
CONTROLS
ELECTRONIC CONTROL BOARD
TEMPERATURE INDICATOR
ON/OFF SWITCH
ELECTRONIC
CONTROL BOARD
TEMPERATURE &
HUMIDITY
CONTROLS
7-S helf Mul ti-Pu rpos e Ra ck
Rac k Op enin g: 2. 5” (64 mm)
Dimensi ons
HMC-1 & 1X:
22.42” W x 24.11” D x 32.5 4” H ( 569 x 612 x 827 mm )
HMC-2 & 2X:
22.42” W x 25.36” D x 32.5 4” H ( 569 x 645 x 827 mm )
Cab inet Ope ning :
18.98” W x 23.73” H ( 482 x 6 03 mm)
Cor d Location
Facing con trols, right- hand side panel,
low er r ight corner.
Water Qualit y Re quir emen ts
Water supply in exce ss of 3.0 gra ins of hard ness p er gallon (GPG) (.7 5
gra ins of hardness p er l iter) mus t be treate d an d softened befo re
being u sed. Wate r co ntaining over 3.0 G PG (.75 GPL) will d ecrease the
efficie ncy and reduce the op erating life of t he unit. N OTE: Pro duct fai lure
cau sed by limi ng or s edi ment bui ld- up i s n ot c over ed u nde r wa rran ty.
Accessories
Racks -
7- Shel f M ult i-P urp ose Ra ck
5-Ti er Cir cle Ra ck
3 -Shelf Angle Rack
3-Tier Pretzel Tree
4” ( 102 mm ) Adjustable Legs
Perforated Pizza Pans - 14”, 15”, 16” or 18” (35 6, 3 81, 40 6m or 457 mm )
Diameter
Half-Size Sheet Pan
Motorless Rack Coupling ( For -X mod els onl y)
Graphic Adhesive Decals ( thre e ( 3) per se t)
Ho t Fr esh Piz za
Ho t Fr esh Sa ndwi che s
3-S helf Ang le R ack
Rac k Op enin g: 3. 5” (89 mm)
Rac k s hel ves sl ant at 15° an gle
www.mercoproduc ts.com
©2010 Merc o, LLC / Printed in the U.S.A. / XXXX-4/10
4-Ti er Cir cle Ra ck
4-Ti er Pan Ra ck
5-Shelf Angle Rack
Ho t Fr esh Pre tze ls
Ho t & Fre sh
5-S helf Ang le R ack
Rac k Op enin g: 2. 5” (64 mm)
3-Ti er Pr etze l Tree
Rac k Op enin g: 5. 88” (1 49m m)
Shipping
Weight
Models
HMC -1 HMC -1X HMC -2 HMC -2X
Loading...