Merco TS-24, TS-36, TS-48, TS-60, TS-72 Operation Manual

INSTALLATION & OPERATING

INSTRUCTIONS

for

FREE-STANDING THERMAL SHELVES

BUILT-IN THERMAL SHELVES

TS-24, TS-36, TS-48, TS-60, TS-72

THIS MANUAL CONTAINS IMPORTANT SAFETY AND INSTALLATION-OPERATION INSTRUCTIONS. REQUIRE ALL
OPERATORS TO READ THIS MANUAL BEFORE USING THE UNIT. FAILURE TO FOLLOW THE INSTRUCTIONS
CONTAINED IN THIS MANUAL MAY CAUSE INJURY AND/OR DAMAGE TO THE UNIT AND WILL VOID THE WARRANTY.

!

THIS MANUAL SHOULD BE RETAINED FOR FUTURE USE

TS-24 Shown

REV: 10/26/07

DIMENSIONS

(inches/cm)

SPECIFICATIONS

(Standard Models)

Model #

Watts

120 208 240

TS-24 2.5 1.4 1.3 300 24/61.0 13/6.0 19/9.0 0.75/0.021
TS-36 4.2 2.4 2.1 500 36/91.4 18/8.2 25/11.4 1.1/0.031
TS-48 4.2 2.4 2.1 500 48/122.0 24/11.0 32/15.0 1.5/0.042
TS-60 6.3 3.6 3.1 750 60/152.4 29/13.2 38/17.3 1.9/0.54
TS-72 6.3 3.6 3.1 750 72/183.0 35/16.0 45/20.4 2.3/0.07

Voltage / Amps

Length

inches/cm

Net Wt.*

lbs./kg.

Ship Wt.*

lbs./kg.

Ship Vol.*

cu. ft./cu. m.

2

TS Series Operations Manual

GENERAL INFORMATION

NOTE: This manual contains important safety and installation/operation instructions. Require all operators to read
this material before using this unit. Failure to follow the instructions contained in this manual may cause injury,
damage to the unit, and will void the warranty.

The Merco Savory Thermal Shelf, Model TS, is designed for counter-top applications. The aluminum and stainless
steel construction provides durability, even heat transfer and easy cleaning. The adjustable infinite control allows
for settings for a wide variety of products.

INSTALLATION

1. Check the specification data plate located on the bottom for the model number, voltage and wattage.

2. Insure the electrical circuit used to supply electricity to the unit has the same voltage rating, as indicated on the
data plate and sufficient amperage rating.

3. Be sure to match the receptacle to the plug on the unit.

4. Place on flat surface.

5. Plug cordset into outlet.

TS xx B

OPERATION

1. Make sure unit is plugged into appropriate outlet.

2. Turn on Infinite Control, Pilot Light will illuminate indicating heat is on.

CLEANING

1. Aluminum and Stainless Steel – perform daily cleaning using only a mild non-abrasive cleanser, applied with a
soft cloth or sponge.

TS Series Operations Manual

3