Merco FFHS10A-C1G11 User Manual
Closed Loop Fried Food Holding Station
Sku / Description
• FFHS10A-C1G11 FFHS-10, 120 volt, 8.3 amp countertop fried food holding station
• FFHS16A-C1G11 FFHS-16, 120 volt, 12 amp countertop fried food holding station
• FFHS16F-C1G11 FFHS-16 SPL, 120 volt, 12 amp countertop fried food holding station, short length
• FFHS16A-D1G11 FFHS-16, 120 volt, 12 amp flange mount (drop-in) fried food holding station
• FFHS16H-D1G11 FFHS-16, 120 volt, 12 amp flange mount (drop-in) fried food holding station, short length
• FFHS27A-C1G11 FFHS-27, 208 volt, 20.6 amp countertop fried food holding station
• FFHS27A-D1G11 FFHS-27, 208 volt, 20.6 amp flange mount (drop-in) fried food holding station
• FFHS32A-D1G11 FFHS-32, 208 volt, 20.6 amp flange mount (drop-in) fried food holding station
Closed Loop Fried Food Holding Station
FFHS16A-C1G11
Specifications
General: Reduce waste and improve profits by extending the life of
your fried foods. With its versatile divider system, the Merco Fried
Food Holding Station can keep a variety of fried products at their peak
serving temperature. Internally controlled air temperature is directed
over and through fried foods using Therma-Lock™ technology to
maintain optimum product temperature and crispness, extending
product retention up to three times!
Construction: The Merco Fried Food Holding Station features solid
stainless steel construction for exceptional durability, aesthetics
and cleanability. The product tray, grease tray, and product dividers
are easily removable for fast clean up. Units feature heavy-duty
components and front centered on/off switch to provide durability
to meet the demands of the commercial kitchen. Available in two
countertop sizes, the Merco Fried Food Holding Station is sure to
meet any capacity requirements from early morning breakfast to
midnight buffets.
Standard Features
• Heavy-duty stainless steel construction
• Removable product dividers, product tray
and grease pan
• Available in 10”, 16”, 27” and 32” widths
• 16” width also available in short length
• Therma-Lock™ Technology insures constant
circulation of hot air over and through food
to control moisture and maintain crispness
• Longer hold times result in less waste,
equaling increased profits
• Internally controlled temperature and air
flow are pre-set at optimum levels allowing
simple on/off switch control
• Temperature adjustments can be made to
fine-tune to specific holding needs
• Unique ergonomic design allows the unit
to be placed on any countertop where
overhead heating elements are not required
• 10” & 16” include 1 divider
• 27” & 32” include 2 dividers
• One year parts and labor warranty
Simple Operation: The air flow and internally controlled temperature
of the Merco Fried Food Holding Station is factory pre-set for
optimum holding time for all fried foods. No adjustment of air flow
or temperature is required; countertop units are controlled by simple
lighted on/off switch.
Electrical Requirements: 120 volt, 60 Hz and 208 volt 60Hz models
are standard with 6’ cord and NEMA plug.
Installation Requirements: Drop-in units are to be mated with
Manitowoc-approved cabinetry for optimum cleanability. Air flow
needs require a 3” minimum “cushion” of open air and 100CFM air
flow at the front and rear air intakes for proper performance. Ambient
conditions must not exceed 120⁰ F at front and rear air intakes. A
minimum of 120 square inches of unrestricted air flow to the over
structure is required if used in built in applications.
Custom Options: Because no two kitchens or foods are exactly
alike, we can accommodate. The Merco closed loop systems can be
factory-set to your desired temperature if our standard temperature
settings are not perfect for your hot holding needs. Contact your
Merco sales representative for details.
Options &
Accessories
• Additional dividers
• Fry scoop holder
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.mercoproducts.com
25”
(64cm)
25”
(64cm)
19”
(48cm)
25”
(64cm)
10.50”
(27cm)
Plan View
FFHS-10
FFHS-10, 16, 16 short, 27
7.5”
(19 cm)
Elevation View
Plan View
FFHS-27 Drop-in
(72 cm)
(68.6 cm)
Elevation View
FFHS-27 Drop-in
28.5”
27”
8.50”
(22cm)
10.00”
(25cm)
25.25”
(64 cm)
(25 cm)
Plan View
9.75”
16”
(41cm)
FFHS-16
Elevation View
FFHS-16 Drop-in
25.25”
(64 cm)
7.5”
(19 cm)
FFHS-16 Short
9.75”
8.18”
(25cm)
(21cm)
Plan View
FFHS-32 Drop-in
33.5”
(85 cm)
32”
(81.3 cm)
Elevation View
FFHS-32 Drop-in
16”
(41cm)
Plan View
17.4
(44cm)
Plan View
FFHS16 Drop-in
9.75”
(25 cm)
25.2
(64cm)
FFHS-10, FFHS-16, FFHS-27
27.5”
(70cm)
Plan View
FFHS-27
17.4”
(44cm)
Plan View
FFHS16 Drop-in (short)
Side View
FFHS-16 Short
Side View
Specications
Model
Counter Cutout Dimensions
W x D
V-Hz-Ph Amps Watts Plug Type
FFHS10A-C1G11 N/A 120-60-1 8.3 1000 NEMA 5-15P 6 ft 22 lb./10 kg
FFHS16A-C1G11 N/A 120-60-1 12.0 1450 NEMA 5-15P 6 ft 44 lb./20 kg
FFHS16F-C1G11 (short) N/A 120-60-1 12.0 1450 NEMA 5-15P 6 ft 33 lb./15 kg
FFHS27A-C1G11 N/A 208-60-1 20.6 4500 NEMA L6-30P 6 ft 66 lb./30 kg
FFHS16A-D1G11 16.62 x 24.44 (42 cm x 62 cm) 120-60-1 12 1450 NEMA 5-15P 6 ft 52 lb./24 kg
FFHS16H-D1G11 (short) 16.62 x 18.88 (42 cm x 48 cm) 120-60-1 12 1450 NEMA 5-15P 6 ft 44 lb./20 kg
FFHS27A-D1G11 27.50 x 24.25 (70 x 62 cm) 208-60-1 20.6 4500 NEMA L6-30P 6 ft 66 lb./30 kg
FFHS32A-D1G11 32.50 x 24.25 (82.6 x 62.2 cm) 208-60-1 20.6 4500 NEMA L6-30P 6 ft 80 lb./36 kg
Cord
Length
Closed Loop Fried Food Holding Station
Merco reserves the right to make changes to the design or specications without prior notice.
19.66”
(50cm)
Weight
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.mercoproducts.com
Printed in the U.S.A.
5752C_MER_FFHSCL
10/16
Loading...