Merco B2A Owner’s Manual

operator manual

Free Standing Bulb Warmers

This document includes:

• Safety Notices

• Specifi cations

• Installation Instructions

• Operating Instructions

• Cleaning Instructions

• Warranty Statement

P/N: 001202
Revision: 12.3.07

Model B2A

Merco Savory, LLC

1111 North Hadley Road

Fort Wayne, Indiana 46804

Technical Support Hotline: [phone]

United States of America

Telephone: [phone]

www.mercosavory.com

IMPORTANT WARNING AND SAFETY INFORMATION

This manual contains important safety and installation-operation instructions. Require
all operators to read this manual before installing, operating or servicing this equipment.

NOTE:

Improper installation, adjustment, alteration, service or maintenance can cause property
damage, injury or death.

DANGER!

DANGER!

CAUTION:

Disconnect power supply before servicing or cleaning this unit. Safeguard power so it can­not be accidentally restored. Failure to do so could result in serious injury.

If the power supply cord appears to be damaged, do not attempt to operate the unit. Con­tact a service agent or qualifi ed electrician to repair!

When using cleaning solutions, be sure they meet local and national health standards.

BEFORE INSTALLATION

Upon receipt of this unit, immediately unpack and remove any protective packaging to inspect for possible concealed
shipping damage. If unit is found to be damaged, save all packing materials and contact your delivery carrier within fi ve
(5) days. If there is apparent damage:

In U.S.A. and Canada: Arrangements should be made to fi le a claim against the carrier as Interstate Commerce Regula-
tions require that the claim must be initiated by the consignee.

In Other Countries: Freight terms will be developed and extended on an individual basis.

GENERAL INFORMATION

The Free Standing Bulb Warmers are manufactured from specially selected alloys for long life and easy cleaning. This
unit features an adjustable arm to vary the height for perfect warming of any hot food as well as a standard 6’ cordset with
inline switch conveniently located out of the heat zone.

DIMENSIONS

B2A (inches/cm)

A 19.72-27.75 / 50.2-70.5
B 20.5 / 52.1
C 12.69 / 32.2
D 10.375 / 26.4
E 16.75 / 42.5
F 11.25-19.25 / 28.6-48.9

SPECIFICATIONS

Model 120V Voltage/Amps

B2A 4.2 N/A 2.1 500 See Illustration 6 / 2.7 12 / 5.4 2.5 / 0.07

208V

240V** Watts Dimensions Net Wt.*

lbs. / kg.

Ship Wt.*

lbs. / kg.

Ship Vol.*

cu. ft. / cu. m.