Please make yourself familiar with your
COMAND control unit and read the
instructions in this manual before operating
the COMAND system. This will help you derive
a greater benefit from the system. Please also
follow the instructions and warnings
contained in this manual. Ignoring them could
result in damage to the vehicle or personal
injury to you or others.
Depending on model, version and
configuration, your COMAND system
equipment may differ. Therefore, you may
find explanations for optional equipment not
installed in your vehicle. If you have any
questions about the operation of any
equipment, your authorized Mercedes- Benz
Center will be glad to demonstrate the proper
procedures.
We continuously strive to improve our
product and ask for your understanding that
we reserve the right to make changes in
design and equipment. Therefore,
information, illustrations and descriptions in
this manual might differ from the equipment
installed in your vehicle. As such, the
information, illustrations and descriptions
contained in this manual may not be
reasonably relied upon in making any claims
with respect to the actual performance of the
product.
These operating instructions form an integral
part of the vehicle and should therefore
always be kept inside the vehicle and passed
on to the new owner if the vehicle is sold.
We extend our best wishes for many miles of
safe, pleasurable driving.
This operating guide has been designed to
help you use your COMAND control unit in all
situations. Each chapter has its own color
code in order to make it easier to find
information. Since not all models have the
same standard equipment, your COMAND
system equipment may deviate from some
Introduction
descriptions and illustrations.
At a Glance
Here you will find an overview of the
components of COMAND. Then you will find
examples illustrating how to operate
COMAND and information on the basic
functions. If you are operating a COMAND for
the first time or have rented the vehicle, you
should first read this chapter.
System Settings
Here you will find all the important
information regarding the system settings of
the COMAND.
Navigation
Here you will find detailed information
regarding the following topics:
R
Setting options for the map display and the
route calculation
R
Destination input
R
POI input
R
Route guidance
R
Destination memory
Telephone
The telephone functions are described here.
You will also find information on the address
book.
Audio
Here you will find all information regarding
the audio function and its Radio, HD Radio,
SatRadio, CD-audio/DVD audio/MP3, Music
Register, Media Interface and Audio Aux
modes.
Video
Here you will find all information regarding
the video system.
Rear Seat Entertainment (RSE)
In this chapter the Rear Seat Entertainment
is explained.
Voice Control
Here you will find information about operating
several COMAND functions via Voice Control.
Tele Aid
Here you will find information on how to use
Tele Aid and the Search & Send function.
Indexes
Content and keyword indexes are intended to
help you find information quickly.
Operating Safety
17
Symbols
You will find the following symbols in these
operating instructions:
Warning!
G
Warning notices draw your attention to
hazards that may endanger your health or life,
or the health or life of others.
!
Highlights hazards that may result in
damage to your COMAND.
i
Helpful hints or further information you
may find useful.
X
This symbol points to
instructions for you to follow. A
number of these symbols
appearing in succession
indicates a multiple-step
procedure.
O
The continuation symbol marks
an interrupted procedure which
will be continued on the next
page.
(Ypage 11)
This symbol tells you where to
look for further information on
this subject.
Display
Messages, menu items or soft
key names appearing in the
COMAND color display are
printed in the style shown here.
Operating Safety
Warning
G
Any alterations of electronic components or
software can cause malfunctions.
Radio, satellite radio, amplifier, DVD changer,
navigation module, telephone and Voice
Control systems are interconnected.
Therefore, if one of the components is not
operational, or has not been removed/
replaced properly, the function of other
components could be impaired.
Such conditions might seriously impair the
operating safety of your vehicle.
We recommend to have any service work on
electronic components carried out by an
authorized Mercedes-Benz Center.
Warning
G
In order to avoid distraction which could lead
to an accident, the driver should enter system
settings while the vehicle is at a standstill, and
operate the system only when permitted by
road, weather and traffic conditions.
Bear in mind that at a speed of just 30mph
(approximately 50km/h), your car covers a
distance of 44feet (approximately 14m) every
second.
COMAND supplies you with information to
help you select your route more easily and
guide you conveniently and safely to your
destination. For safety reasons, we
encourage the driver to stop the vehicle in a
safe place before answering or placing a call,
or consulting the COMAND screen to read
navigational maps, instructions, or
downloaded information.
Warning
G
While the navigation system provides
directional assistance, the driver must remain
focused on safe driving behavior, especially
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. Their
observance always remains in the driver’s
personal responsibility. DVD maps do not
cover all areas nor all routes within an area.
This device complies with Part15 of the
FCCRules. Operation is subject to the
following two conditions:
Introduction
Z
Operating Safety
18
1. This device may not cause harmful
interference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation.
Warning
G
Change or modification not expressly
Introduction
approved by the party responsible for
compliance could void the user's authority to
operate this equipment.
!
Note: This equipment has been tested
and found to comply with the limits for a
ClassA digital device, pursuant to Part15
of the FCCRules. These limits are designed
to provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Warning
G
This equipment complies with FCC radiation
exposure limits set forth for uncontrolled
equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in
Supplement C to OET65.
This equipment has very low levels of RF
energy that is deemed to comply without
maximum permissive exposure evaluation
(MPE). But it is desirable that it should be
installed and operated with at least 8inches
(20cm) and more between the radiator and
person's body (excluding extremities: hands,
wrists feet and legs.)
Declaration of Conformity Regarding
the Distribution of
Telecommunications Equipment
Daimler AG declares herewith that this device
conforms to the basic requirements and the
other relevant regulations of Directive
1999/5/EC (RTTE Directive).
Intended Purpose
Please bear the following information in mind
when using the COMAND:
R
The safety instructions in this guide
R
Road Traffic Regulations
i
Tampering with electronic components or
systems (e.g. radio, DVD changer) and their
software may result in malfunctioning.
Systems which have not been changed may
be affected due to the connectivity of the
electronics. Malfunctions of the electronics
can seriously endanger the operational
safety of your vehicle.
i
Always have all work or modifications to
electronic components carried out by a
qualified specialist workshop with the
necessary expertise and tools for any work
required. Daimler AG recommends a
Mercedes-Benz service center for this
purpose. Especially for safety-related
operations and operations on safetyrelated systems, servicing by a qualified
specialist workshop is essential.
Function Restrictions When Driving
the Vehicle
For safety reasons, some COMAND functions
are restricted or not available when the
vehicle is moving. This can be recognized, for
example, from the fact that certain menu
items cannot be selected or the COMAND
displays a corresponding message.
COMAND Control System ................... 20
Multifunction Steering Wheel ............ 24
Operating COMAND ............................ 28
Basic Functions of COMAND .............. 31
19
At a Glance
COMAND Control System
20
COMAND Control System
At a Glance
FunctionPage
$
1
Switch to radio mode119
Switch wavebands120
W
2
Switch to system menu38
h
3
Switch to CD audio/DVD
audio and MP3 operation136
Switch to video DVD mode
%
4
Switch to phone main menu
or address book100
V
5
Load/Eject button132,
6
Disc slot
Loading CDs/DVDs132
Ejecting CDs/DVDs134
Update the map software49
134
FunctionPage
C
SD memory card slot
Loading SD memory card134
Ejecting SD memory card135
D
COMAND display
E
Number keypad
Select stations via the
station preset121
Store stations manually121
Enter the Bluetooth
passkey97
Enter the phone number107
Send DTMF tones108
U
Set map scale (enlarge)54
T
Set map scale (reduce)54
COMAND Control System
21
FunctionPage
F
2
Press briefly:
Delete individual
characters
Press and hold:
Erase an entire entry
G
k
Press briefly:
Leave the menu and switch
to the next menu level up
Press and hold:
Switch to the basic display
of the current operating
mode
H
9
Press briefly:
Confirm a selection
Store the setting32
Hide or show the menu
system54
Press and hold:
Accepts a list entry
I
9/:/;/=
Select a station120
Select a track139
Select menu items or list
entries
Exit menus or lists
Scroll the map
54
FunctionPage
J
Set the volume32
K
Switch COMAND on or off31
L
F/E
Select stations120
Select the next/previous
track139
Fast rewind/forward139
M
6
Accept a call107
Redial108
N
~
Reject a call107
End an active call109
O
x
Switch the sound on and off32
Switch off navigation
announcements32
P
Ø
Switch to navigation mode53
At a Glance
Vehicle Equipment
i
This Operator’s manual describes all
features, standard or optional, potentially
available for your vehicle at the time of
purchase. Please be aware that your
vehicle might not be equipped with all
features described in this manual.
Function Overview
With COMAND you can operate the following
main functions:
R
the navigation system
R
the audio function with the radio, HD
Radio™, SatRadio, disc (CD audio, DVD
audio or MP3 mode), SD memory card
(MP3 mode), Music Register and Audio Aux
modes
Z
COMAND Control System
22
R
the telephone and the address book
function
R
DVD video
R
systems settings
You can call up the main functions:
R
using the hard keys Ø, $, %,
h or W.
R
using the main function line in the
COMAND display
At a Glance
COMAND Display
The COMAND display shows the function
currently selected and its associated menus.
The COMAND display is divided into several
areas.
The radio display is shown in the example.
menus for the full equipment version are
shown in this guide.
Menu Overview
Having selected a main function, you will find
the submenu line at the bottom edge of the
COMAND display.
If one of the main functions such as
Navigation, Audio, Video or Phone is currently
selected, additional menus are available from
the main function line (Y page 23).
This is indicated by a small triangle behind the
main function label.
Example: Audio main function display
1
Status line
2
Main function line
3
Main area
4
Submenu line
Status line 1 displays the time and the
current telephone status.
With the main function line 2 you can select
the main function. The selection is made
using the ; and = buttons .
In the example, the audio main function is set
to radio mode and the main area 3 is active.
i
The arrangement of the menus can vary,
depending on the equipment. Normally, the
1
Triangle indicating an additional menu
COMAND Control System
Main Function Menu Items
NaviAudioPhoneVideo
Map DisplayFM/AM RadioTelephoneDVD Video
ModeSatRadioAddress bookVideo Aux
Block AreaDisc (CD audio , DVD
audio, MP3 mode,
Media Interface)
Save Off-road RouteMemory card (MP3
mode)
Information On MapMusic Register
23
At a Glance
Ç Highway
information
Media Interface
Aux
Z
Multifunction Steering Wheel
24
Multifunction Steering Wheel
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions permit
At a Glance
it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
Function
4
5
Function
Menu systems:
Press button
V
for next menu
U
for previous menu
Press button briefly
&
*
Within Audio/DVD menu to select
previous or next track, scene or
stored station.
Within Telephone menu to switch
to the phone book and select a
name or number.
Press and hold Button
&
*
Selecting a menu
Within Audio/DVD menu to select
previous or next track with quick
search or to select previous or next
station in station list or wave band.
Within Telephone menu to start
the quick search in the phone
book.
1
2
3
Multifunction display
Selecting the submenu or setting
the volume:
Press button
W
up/to increase
X
down/to decrease
Telephone:
Press button
6
to take a call, to dial, to
redial
~
to end a call, to reject an
incoming call
Depending on the selected menu, pressing
the buttons on the multifunction steering
wheel will alter what appears in the
multifunction display.
The information available in the multifunction
display is arranged in menus, each containing
a number of functions or submenus.
The individual functions are found within the
relevant menu (Radio or CD operations under
AUDIO, for example). These functions serve
to call up relevant information.
It is helpful to think of the menus, and the
functions within each menu, as being
arranged in a circular pattern.
Multifunction Steering Wheel
25
If you press button V or U repeatedly,
you will pass through each menu one after the
other.
If you press button * or & repeatedly,
you will pass through each function display,
one after the other, in the current menu.
Multifunction Display Menus
MenusFunctions and Submenus
Audio
(Y page 25)
R
Selecting radio stations
R
Selecting satellite radio stations
R
Operating the DVD changer/Music register/Memory card/Media
interface
Navi
(Y page 26)
Tel
(Y page 26)
Display
R
Route guidance instructions
R
Current street name and direction of travel
R
Answering a call
R
Ending and rejecting a call
R
Selecting a phone book entry
R
Redialing
The number of menus available in the system
depends on which optional equipment is
installed in your vehicle.
The menus are described on the following
pages.
At a Glance
i
The headings used in the menus table are designed to facilitate navigation within the
system and are not necessarily identical to those shown in the control system displays.
The first function displayed in each menu will automatically show you which part of the
system you are in.
AUDIO Menu
The functions in the AUDIO menu operate the
audio equipment which you currently have
turned on.
If no audio equipment is currently turned on,
the message AUDIO OFF appears in the
multifunction display.
The following functions are available:
Selecting Radio Stations
X
From COMAND select FM/AM Radio in the
Audio menu.
X
Press button V or U repeatedly until
you see the currently tuned station in the
multifunction display.
X
Select next or previous stored station:
Press button * or & briefly to select
a stored station.
X
Select next or previous station in the
station list: Press and hold * or &
to select a station.
Z
Multifunction Steering Wheel
26
i
You can only store new stations using the
COMAND controls.
Selecting Satellite Radio Stations
The satellite radio is treated as a radio
application.
X
From COMAND select SatRadio in the
Audio menu.
X
Press button V or U repeatedly until
you see the currently tuned station in the
At a Glance
multifunction display.
X
Select next or previous stored channel:
Press button * or & briefly to select
a stored channel.
X
Select next or previous channel in the
channel list: Press and hold * or
& to select a channel.
Operating DVD Changer, Music Register,
Memory Card, Media Interface
Selecting a track or scene
X
From COMAND select a source from the
Audio menu.
X
Press button V or U repeatedly until
the audio source currently being played
appears in the multifunction display.
X
Selecting previous or next track: Press
button * or & briefly.
X
Selecting a track from the track list
(quick search): Press and hold * or
&.
R
with COMAND switched off, the message
NAV OFF appears in the multifunction
display.
R
with COMAND switched on but route
guidance not activated, the direction of
travel and, if applicable, the name of the
street currently traveled on appear in the
multifunction display.
R
with COMAND switched on and route
guidance activated, the direction of travel
and maneuver instructions appear in the
multifunction display.
Tel Menu
Warning
G
A driver's attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the mobile
phone while driving, please use the handsfree
device and only use the mobile phone when
weather, road, and traffic conditions permit.
Some jurisdictions prohibit the driver from
using a cellular mobile phone while driving a
vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
i
Track selection may depend on selected
settings in COMAND or the connected
device.
NAVI Menu
The NAV menu contains the functions needed
to operate your navigation system.
X
Press button V or U repeatedly until
you see the message NAV in the
multifunction display.
The message shown in the multifunction
display depends on the status of the
navigation system:
You can use the functions in the Tel menu to
operate your mobile phone, provided it is
connected to a hands-free system and
switched on.
X
Switch on the mobile phone and COMAND .
X
Press button V or U on the steering
wheel repeatedly until the TEL menu
appears in the multifunction display.
Which message appears in the multifunction
display depends on your mobile phone's
authorization and on/off status:
R
If the mobile phone has not yet been
authorized, the message in the
multifunction display is: BLUETOOTHREADY.
R
If the mobile phone is switched on and
authorized, the message in the
multifunction display is: READY.
Answering a Call
When your mobile phone is ready to receive
calls, you can answer a call at any time. In the
multifunction display you will see a
corresponding message or, if available, the
caller ID (name and number):
X
Press button 6.
You have answered the call.
Ending a Call or Rejecting an Incoming Call
X
Press button ~.
Dialing a Number from the Phone Book
If your mobile phone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
X
Press button V or U repeatedly until
the TEL menu appears in the multifunction
display
X
Press button * or & repeatedly until
the desired name or number appears in the
multifunction display.
X
To scroll through the list of names or
numbers using the quick search mode:
Press and hold button * or & for
longer than one second.
The system scrolls rapidly through the list
of names or numbers until you release the
button.
The stored names are displayed in
ascending or descending alphabetical
order.
X
To cancel the quick search mode: Press
button ~
Multifunction Steering Wheel
appears in the multifunction display when
* or & is pressed.
X
Press button 6.
The system dials the selected phone
number.
If the connection is successful and this
feature is supported by your network
provider, the name of the party you are
calling (if stored in your phone book) will
appear in the multifunction display.
If no connection is made, the control
system stores the dialed number in the
Calls dialed memory.
Redialing
The control system stores the most recently
dialed phone numbers. This eliminates the
need to search through your entire phone
book.
X
Press button V or U repeatedly until
the TEL menu appears in the multifunction
display.
You will see the Ready message.
X
Press button 6.
In the multifunction display you see the first
number in the Calls dialed memory.
X
Press button * or & repeatedly until
the desired name appears in the
multifunction display.
X
Press button 6.
The control system dials the selected
phone number.
27
At a Glance
i
If no contacts have been downloaded
from the mobile phone, No entries
Z
Operating COMAND
28
Operating COMAND
Opening Menu of a Main Function
Example: Audio Menu
Within the Audio Function
At a Glance
1
Main function line
2
Audio menu
3
The symbol R indicates current
operating mode.
X
To switch to main function line 1:
Press 9.
X
To select audio main function:
Press ; or =.
X
To confirm selection: Press 9.
You will see the main display for the
selected audio mode.
X
To switch back to the main function
line 1:
Press 9 and 9.
The Audio menu appears.
Selecting Menu Item
Example 1: Radio, Station Memory
1
Selection bar
Selecting Menu Item
X
Press 9 or :.
The selection bar moves up and down
within the list.
Confirming Menu Item
X
Press 9.
Exiting the Menu Without Selecting
X
Press ; or = against the list
direction.
Example 2: Navigation, Enter
Destination Menu
Enter Destination menu
1
Menu with upper and lower menu bar
2
Selector bar
Loading...
+ 190 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.