Meraki Outdoor Installation Manual

Meraki Outdoor
Hardware Installation Guide
Trademarks
Meraki, Meraki Outdoor, Meraki Cloud Controller, and Meraki Mesh are trademarks of Meraki, Inc. Other brand and product names are registered trademarks or trademarks of their respective holders.
Statement of Conditions
Warranty
Meraki, Inc. provides a limited warranty on this product. Warranty details may be found at www.meraki.com/legal
Table of Contents
1 Scope of Document and Related Publications 4
2 Outdoor Overview 5
2.1 Package Contents 5
2.2 Understanding the Outdoor 5
2.3 LED Indicators and Run Dark Mode 7
3 Pre-Install Preparation 8
3.1 Confi gure Your Network in Dashboard 8
3.2 Check and Confi gure Firewall Settings 8
3.3 Check and Upgrade Firmware 8
3.4 Determine How IP Addresses will be Assigned to Your Outdoor 9
3.5 Collect Tools 10
3.6 Collect Additional Hardware for Installation 10
4 Installation Instructions 11
4.1 Choose Your Mounting Location 11
4.2 Install the Outdoor 11
4.3 Deploy Your Repeaters 12
4.4 Verify Device Functionality and Test Network Coverage 13
5 Troubleshooting 13
6 Regulatory Information 14
3
1 Scope of Document and Related Publications
The Outdoor Hardware Installation Guide describes the installation procedure for the Outdoor access points.
Additional reference documents are available online at www.meraki.com/library/products.
4
2 Outdoor Overview
The Meraki Outdoor is a weather-proof and UV-protected wireless access point, gateway, and repeater, designed to boost your network’s range out of doors.
2.1 Package Contents
The Outdoor package contains the following:
Meraki Outdoor Antenna Mounting feet
and screws
2.2 Understanding the Outdoor
Your Meraki Outdoor has the following features:
RPSMA Antenna Connector
Screws and
rubber washers
Power cord
POE injector
LED indicators
5
Mounting feet holes (2x)
Cable bay
Weatherproofi ng plugs
Back panel mounting holes (3x)
Ethernet jack #1
PC jack
6
Ethernet jack #2
Loading...
+ 14 hidden pages