Mennekes Electrical Products Wiring Devices brochure

MENNEKES offers a wide range of Wiring Devices for various applications.

The terminals provide a large clamping area, with uniform
contact pressure on the conductor providing low contact
resistance in use. High operational reliability is assured.

60A and 100A models also
have an ergonomic design
to facilitate the mating and
un-mating of devices. NPT
threading in rear housing
allows for use with standard
ex conduit ttings.

The strain relief clamps and
screws are captive reducing
the possibility of losing
components during
assembly.

Nickel-plated plug pins
seated in contact carriers
molded from heat resistant
thermoplastic materials
give increased corrosion
protection in aggressive and
high humidity environments.

The onion ring seal with its
large sealing surface can
be adapted to all common
cable diameters.

Features and benets

Receptacles

Compact units are ideal for panel mount installations.
Receptacles have an oversized ground sleeve to prohibit
mismating of different voltages.

Plugs

In-line plugs feature non-metallic housings with locking rings
and gaskets for watertight protection.

The external strain relief protects the sealing ring as it absorbs
stresses caused by movement of the cable. A locking screw
prevents accidental movement of the strain relief. The
effectiveness of the strain relief can be checked at any time,
therefore working safety is considerably increased.

Inlets

Ideal for generator or motor plug interface applications, inlets
are compact and can be surface mounted or mounted with
available back boxes.

Connectors

In-line connectors feature dead-front construction for safety
and use split brass solid sleeves.

9