Mencom Profibus-DP General Product Line Information

Probus-DP

47

1.8

L

Ø .58

14.7

M12x1
Female
Thread

L

31.7

1.2

8.5

Ø .3

B

7.3
R.3

.18

4.60

.12

3

13.88
.55

.76

19.25

8.5
.33

16
.63

.61

15.6
.43

10.9

1/2-14NPT

M12X1

1.00

25.4

Decentralized Peripherals

Over-Molded Cordsets | Receptacles | Field Wireables | Accessories

UL File #:

E149111

PROFIBUS (Process Field Bus) is a standard for eld bus communication in automation technology. The PROFIBUS protocol has
application specic proles to meet differing factory oor requirements. There are two variations of PROFIBUS in use today; the most
commonly used PROFIBUS DP, and the lesser used, application specic, PROFIBUS PA (See Section-O).

Probus-DP

Probus-DP is optimized for factory automation to operate sensors
and actuators via a centralized controller in production applications.
Probus-DP uses an industrial physical layer based on RS-485. It is a
two-wire differential system extremely resistant to electrical interference.
Communication rates range from 9.6 kbps – 12 Mbps. The main cable is
a 22awg shielded twisted pair covered by an outer braided shield.

Probus-DP Series

N

N-1

Probus-DP Series Receptacles

Probus-DP Series Receptacle Part Number Matrix

Not all options available with all receptacles, please consult factory.

PBEC 3

Ground Tab

Blank = No Ground Tab
M = Ground Tab

Connector Conguration

MP = Male Receptacle
FP = Female Receptacle

- - - - -

R/A or Straight

Blank = Straight
R = Right Angle

Mounting Style

Blank = No Wire
2 = Front Mount 1/2”-14 NPT
4 = Front Mount 1/4”-18 NPT
PG9 = Front Mount PG 9 Threads
M20 = Front Mount Metric 20 Threads

Other thread types are available, please consult the factory.

Probus-DP Series

N

Length in Meters

Termination Type

Blank = Pre-Wired

PCB = PCB Mount

N-7