Page 1
41" Tool Chest & Cabinet
CAUTION:
Actual product may differ
slightly from image shown
EACH UNIT SOLD SEPERATELY
Chest Model #: 245-1932 /245-1936/245 -19 40/245-1944
Cabinet Model #: 245-1934/245-1938/245-1942/245-1946
OPERATOR’S MANUAL
To Reduce The Risk Of Injury, User Must Read
And Understand Operator’s Manual. Save These Instructions
For Future Reference.
Page 2
TABLE OF CONTENTS
Safety Symbols ......................................................................... 2
Safety Instructions ..................................................................... 3
Parts List ................................................................................... 4
Assembly and Operation ........................................................... 5
Maintenance and Safety ............................................................ 7
Page 3
SAFETY SYMBOLS
CAUTION:
Model #: _______________________________
1. Read and follow all safety and assembly
instructions before using this product for
the first time.
2. Fill in the following information and retain
the manual for future reference:
Do not open more than one drawer at a time.
Do not step on drawers.
Do not allow children near the unit.
Set the brake on the locking casters unless you are moving the unit.
Place of purchase: ______________________
Date of purchase: _______________________
Receipt # of purchase: __________________
Lock drawers and lid before moving the unit.
Do not lift unit by yourself.
Page 4
SAFETY INSTRUCTIONS
WARNING:
DANGER:
WARNING:
CAUTION:
The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols, and the explanations with them, deserve your careful attention and understanding.
The symbol warnings do not by themselves eliminate any danger. The instructions and
warnings they give are no substitute for proper accident prevention measures.
Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as “DANGER,” “WARNING,” and
“CAUTION,” before using this product. Failure to follow all instructions listed below may
result in electric shock, re and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. May be
used in conjunction with other symbols or pictographs.
Failure to obey this warning WILL result in death or serious injury to
yourself or to others. Always follow the safety precautions to reduce the risk of personal
injury.
Failure to obey this safety warning CAN result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the risk
of personal injury.
Failure to obey this safety warning MAY result in personal injury to
yourself or others or property damage. Always follow the safety precautions to reduce
the risk of personal injury.
Page 5
PARTS LIST
11
For service regarding parts, assembly or warranty information, please call: 1-800-459-4409.
The keys are taped to bottom
left drawer of the chest.
1
2
3
4
5
12
11
10
9
Ref# Description Part# Qty
1 Gas Strut 30 318 6 2 pcs
2 Grommet 314027 1 pc
3 Power Strip 333059 1 pc
4 Lock and Key
(1201–1210)
5 Slide Set 1 300176–
6 Slide Set 2 300040–
6
8
304054 1 pc
8 sets
300177
1 set
300042
The keys are taped to the top of the
caster carton, which is placed in
the bottom drawer of the cabinet.
15
7
12
Ref# Description Part# Qty
1 Cabinet Handle 306061 1 pc
2 M6 x 12 Hex Bolt 321051 4 pcs
3 Grommet 314 027 1 pc
4 Power Strip 333059 1 pc
5 M6 x 12 Phillips
Head Bolt
6 Cord Wrap 236870 1 pc
7 Slide Set 300176–
14
13
320323 2 pcs
300177
1
2
3
4
5
6
7
8
9
10
14 sets
7 Drawer Liner 55190 0 4 pcs
8 Drawer Liner 551887 4 pcs
9 Till Liner 551886 1 pc
10 Connector 200837 2 pcs
11 Chest Handle 306001 2 pcs
12 M6 x 12 Hex Bolt 321051 10 pcs
8 Swivel Caster 302 177 2 pcs
9 Washer 324002 16 pcs
10 M8 x 25 Hex Bolt 321047 16 pcs
11 Drawer Liner 55190 0 5 pcs
12 Drawer Liner 551887 5 pcs
13 Rigid Caster 302001 2 pcs
14 Lock and Key
(1201–1210)
15 Drawer Liner 551889 1 pc
NOTE:
1. Replacement keys may be ordered,
using the required code which appears
on the face of the lock.
2. Give the information for service parts:
part number and quantity.
304054 1 pc
Page 6
WARNING:
ASSEMBLY AND OPERATION
NECESSARY TOOLS REQUIRED
FOR ASSEMB LY
• 10 mm socket
• 14 mm socket
• Extension ratchet
INSTALL THE HANDLE
Position the handle over the holes and
attach with the M6 x 12 hex bolts. Tighten
securely using a 10 mm socket.
INSTALL THE CASTERS
NOTE: Two or more people may be required
to complete this step.
Carefully lay the bottom cabinet on its
back using a soft mat under the back for
protection. Position the two swivel casters
on the bottom of the cabinet, on the right
side (same side as the handle). Insert
M8 x 25 hex bolts through washers, then
through the casters and into the bottom
of the cabinet. Tighten securely using a
14 mm socket. Repeat for the two rigid
casters on the other side of the cabinet.
INSTALL THE
POWER CORD
Cut the black strip holding the cord, then
pull the white strip to get the plug out of the
cabinet and through the grommet. Tighten
the grommet.
CHEST AND CABINET
CONNECTION
(Where applicable)
When adding a chest, all add-on tops must
be removed from the roller cabinet. Make
sure that both connector brackets are in
place and secure.
NOTE: Two or more people may be required
to complete this step.
Place the chest on the cabinet. Attach the
connectors, making sure the connectors
slide into the openings on the back of the
chest. Fasten the connectors to the back
of the cabinet with screws.
Page 7
ASSEMBLY AND OPERATION
RAISE AND RELEASE
TO REMOVE DRAWERS
DRAWER FRONTS
This unit is equipped with raise and release
drawer fronts.
To open, lift up on the drawer front while
pulling towards you.
To close, shut the drawer firmly until the
latch engages.
If the drawer does not stay closed, the
drawer contents may be the obstruction, or
the hook may be bent or it may rub against
the drawer slides. To fix this problem, lightly
bend the hook until the drawer engages in
the slide.
Pull the drawer out so it is almost fully
extended. PUSH UP on the black release
lever on one side, while PULLING DOWN
on the black release lever on the other side.
While holding the levers in the positions as
instructed above, pull the drawer outward
until it is released from the drawer slide.
PUSH UP (ONE SIDE)
PULL DOWN (OTHER SIDE)
TO REPLACE DRAWERS
Extend the drawer slides from the tool
chest or cabinet. Insert the brackets on
each side of the drawer into the slots in
the chest or cabinet slides, being careful
that they are positioned properly. Once
properly inserted, completely close the
drawer / work top to set the slides in their
proper positions.
Page 8
MAINTENANCE AND SAFETY
WARNING:
CAUTION:
WARNING:
WARNING:
WARNING:
CAUTION:
CAUTION:
CAUTION:
WARNING:
CAUTION:
WARNING:
WARNING:
CAUTION:
CAUTION:
CAUTION:
MAINTENANCE
Lubricate the casters with high quality
bearing grease once a year.
Lubricate the slides twice a year with
a product like WD40 or other quality
lubricant. This is especially important when
the temperature decreases, as the bearing
can become stiff.
Periodically clean the drawer fronts,
drawer trim, and other surfaces with mild
detergent and water.
Auto wax will preserve the storage unit’s
luster finish. Apply the wax as you would to
a car. The wax will also help protect the unit
against scratches.
Grease and oil can be removed with most
standard cleaning fluids. For safety, use a
nonflammable cleaning fluid.
SAFETY
WEAR SAFETY
GLASSES when removing or repositioning
the slides. The tool could slip which may
cause personal injury.
When moving this
product, do not pull it. Push the product to
prevent personal injury.
USE THE BRAKES
when not moving this product. This will
prevent the product from rolling, which may
cause personal injury or product damage.
BE CAREFUL when
opening more than one drawer. The product
may become unstable and tip, which may
cause personal injury or product damage.
DO NOT mount this
product on a truck bed or any other moving
object. This may cause personal injury or
product damage.
Close the
cover and lock the drawers before
moving this product. The drawers
could come open and make the
product unstable and tip, or cause
the chest to slide off, which may
cause personal injury or product
damage.
The load capacity
of the side handles used on all 41" chest
and cabinet units is 200 lbs. when used in
tandem.
DO NOT attempt to
lift the unit by its side handles using chains,
ropes or other lifting devices if two people
cannot lift it. Use a forklift placed under the
bottom of the unit if this situation occurs.
The side handle may fail, which may cause
personal injury or damage to the product.
Secure this product
properly before moving it with a forklift.
DO NOT tow with
power equipment. The product could
tip, which may cause personal injury or
product damage.
DO NOT alter this
product in any manner. For example, do not
weld external lockbars or attach electrical
equipment. This may cause product
damage or personal injury.
Keep the product on
level surfaces. The product may become
unstable and tip if stored or moved on an
uneven surface, which may cause personal
injury or product damage.
BE CAREFUL when
closing the cover. Remove hands before
the cover closes completely to prevent
personal injury.
DO NOT stand on
this product or lean on the work top.
The maximum weight
for each drawer should be no more than
110 lbs. If the drawer has two sets of slides,
the load can be no greater than 220 lbs.
Page 9
CAUTION:
WARNING:
WARNING:
WARNING:
WARNING:
MAINTENANCE AND SAFETY
The maximum
product weight, including contents, should
be no more than 2000 lbs.
DO NOT attach or
mount this product to a vehicle. Mounting
this product to any vehicle in any manner
will void warranty.
To prevent the chest
from easily tipping over, fasten the screws
to connect the chest and cabinet.
POWER STRIP
MODEL: LTS-04C
SURGE PROTECTIVE DEVICES
RATING: 120V AC 15A 60Hz 1875W
USB: TOTAL 2.1 A
USB O/P: IT EQUIPMENT ONLY
VPR: 700V (L-N) TYPE 3 SPD
CONFORMS TO UL STD. NO. 1363 AND
ANSI/UL STD. NO. 1449
CERTIFIED TO CSA STD. C22.2 NO. 21
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more the following
measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Standard 2.1 A USB – Check your device
for compatibility.
RISK OF ELECTRIC
SHOCK. To reduce the risk of electric
shock, use indoors in a dry location only.
Do not plug into another power strip. Not
for use for a permanent installation.
Changes or
modifications to this unit not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
3165047
Page 10
NOTES
Page 11
41" Tool Chest & Cabinet
LIMITED LIFETIME WARRANTY
MASTERFORCE® Tool Cabinets and Chests have been manufactured to the highest
standards of quality and workmanship and are warranted to be free from defects
in materials and workmanship under normal use for the lifetime that you own the
product. If any part of the product is found to be defective during normal use, the
defective product or part will be replaced at our discretion. This warranty does not
cover products that are damaged through accident, abuse, misuse, commercial/
industrial applications or neglect. This warranty also does not cover any losses,
injuries or costs including indirect, incidental or consequential damages. This
warranty may not be transferred or sold. When requesting warranty service please
have the model number, cash register receipt and the date of purchase available
when you call. If the product is defective, we will replace the defective part at no
cost to you. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights and you may have other rights,
which vary from state to state.
For questions / comments, technical assistance or repair parts,
call toll free: 1-800-459-4409 (M–F, 8am–4:30pm, CST)
SAVE YOUR RECEIPTS
THIS WARRANTY IS VOID WITHOUT THEM
Page 12
©2017 Mena rd, Inc., Eau Claire, WI 54703 V1 07/ 2017
Loading...