Memphis 16PR11000 User Manual

POWER POWER

POWER

AMPLIFIERAMPLIFIER

AMPLIFIER

Models : 16-PR1.500

16-PR1.1000 by MEMPHIS

REFERENCEREFERENCE

REFERENCE

Where You Headed?

Thank you for choosing Memphis Car Audio! Your choice of Memphis Car Audio indicates
a desire for high quality music reproduction in the automobile. Memphis Car Audio brings
to you over four decades of car audio expertise. So whether you are a daily driving music
lover, or a serious car audio competitor, Memphis Car Audio has the product for you!

To take full advantage of the Memphis Car Audio gear you have just purchased, please
read and follow the instructions in this manual. As with all of our products, professional
installation by an authorized Memphis Car Audio dealer is highly recommended! Otherwise,
the performance of your new gear may not be satisfactory. In addition to the installation
services and expertise offered by an authorized Memphis Car Audio dealer, the warranty
of this product may be extended when installed by an authorized Memphis Car Audio dealer.
Be sure and ask your Memphis dealer about the MECP extended warranty program as well.

You're Headed in the Right Direction with Memphis Car Audio!

INTRODUCTION

The Memphis Car Audio Power Reference Series amplifiers offer high quality audio
reproduction for the audiophile and the everyday listener alike. Full Mosfet design and
24dB per octave crossovers ensure accurate musical reproduction. All models feature
fully variable crossovers with 24dB per octave slopes, allowing you the ability to tailor
the sound to best fit the speakers and your listening preferences.

When combined with the PR coaxial, components, or tweeters powered by one of our. Power
Reference Class A/B amps, you have a complete mobile reference system. To further enhance
your listening enjoyment, Memphis Car Audio also offers a wide range of signal processors.

2

FEATURES

• 1 ohm MONO stable

• Low Level Inputs & Outputs

• Variable Bass Boost (0-18dB) centered at 45Hz

• 24dB Subsonic Filter

• Fully Variable Low Pass Filter

• Protection Circuitry Against Overload, Short Circuit, Thermal, and Reverse Polarity

Platinum finish connections Ensures solid electrical connections that resist corrosion.

Fully Variable Low Pass Crossovers Fully variable crossovers promote installation

ease and save the cost of outboard crossovers. Additionally, they may be used in conjunction
with outboard passive or active crossovers, depending on the complexity required by the
system. The 24dB per octave slope offers steep roll-off above or below the selected frequency.

Protection Circuitry Against Overload, Short Circuit, Thermal, and Reverse Polarity.

These protection features are designed to protect the amplifier from misuse, as well as from
common causes of amplifier failure.

What does the little blue light mean?

It means that the amplifier is on, and should be working normally.
If the light is not illuminated, then please consult the trouble shooting section of this manual.

3