USER GUIDE
USB CompactFlash
T M
CARD READER
You Should Have
1.Memorex®USB CompactFlash
TM
Card Reader.
2. 1x Card Reader installation
C D - R O M .
3 .C a rd Reader User Guide.
Please notify your distributor or
retailer if any of the above is missing.
SYSTEM COMPATIBILITY:
The Memorex SmartCompactFlashTMCard Reader is compatible with
Windows®98/2000/ME/SE and Apple 8.6 or higher with USB enable
machine.
TECHNICAL SUPPORT
For technical support, please visit our website at www.memorex.com
or call (310) 891-1680. To return the Memorex product, please consult
the retailer where you purchased the product. To exchange the product with Memorex, you must call technical support to receive a RMA
Number before sending it back.
LIMITED 1-YEAR WARRANTY
Memtek Products warranties this product against defects in materials or workmanship for one year from the date of purchase. This
w a rranty applies to the original purc h a s e r, proof of original re t a i l
p u rchase is re q u i red. This warranty specifically excludes damage
caused by misuse, abuse, improper storage, or use in a commerc i a l
application. No warranty of merchantability or fitness for a part i cular purpose is made. In the event of a claim against this warr a n t y,
Memtek Products’ obligation, and the claimant’s sole re m e d y, shall
be replacement of the product. This warranty specifically excludes
responsibility for re c o rded data in any form .
USER GUIDE
INSTALLATION
1. Tu rn on your computer, and wait for the Wi n d o w s®e n v i ronment
to appear on your scre e n .
2. Close any application you may have running before installing the
M e m o re x®USB CompactFlash
T M
C a rd Reader software driver.
3. Important! Please install driver software prior to plugging-in
the USB connector.
4. I n s e rt CD into CD-ROM Drive.
5. The setup program should automatically start. If it does not,
please run the setup program by following Step #6.
6. Click S t a rt on the task bar, then select "R u n" command. Type
D:\setup.exe (or CD-ROM drive letter:\setup.exe) and then
click "O K" .
7. Follow instructions during setup pro g r a m .
8. When finished, remove CD from CD-ROM drive, and re s t a rt
your PC.
9. Plug in the USB connector from the Card Reader into the USB
p o rt of your PC.
10. Windows will automatically detect the Memore x®USB
CompactFlash Card Reader and finish loading the driver for it.
1 . S t a rt Windows OS.
2 . Double click on “MY COMPUTER”.
3. You will now see a “Me m o re x®C o m p a c t F l a s h
T M
Reader” icon, that appears as a Removable
Flash hard disk. Depending on the configura-
tion of your computer, the drive letter
assigned to your card reader will vary.
4 . Double click on the “Memore x®” icon.
5 . You may now copy files from your Card Reader
to your hard disk as you would from a floppy
disk or any other removable media by “dragging
& dropping” files.
Notes:
When a Flash Memory Card is
i n s e rted into the Card Reader, it
is configured as if it were a re m o vable hard disk drive. You use the
same methods to read and write
files as you would for your disk
d r i v e .
C A U T I O N :
As with any removable storage
media, removing the Flash Memory
C a rd while data is being
w r i t t e n / t r a n s f e rred may erase the
e n t i re content of the card. Always
wait for the data write operation to
complete before removing the
Flash Memory Card .
COPYING FILES
USER GUIDE
FORMATTING YOUR FLASH MEMORY CARD
Most cards are pre-formatted. If formatting is necessary, it is
recommended to use your digital camera or Flash devices
to format the card. To format your Flash Memory Card in the
USB CompactFlashTMCard Reader, please use the following
steps:
1 . Double click on “MY COMPUTER”i c o n .
2 . Place your mouse over “Me m o re x®USB CompactFlash
TM
R e a d e r” icon and R I G H Tc l i c k .
3 . Choose “F O R M AT ”and the following box will appear.
4 . F rom the dialogue box, select “Qu i c k (e r a s e) ” and then
p ress “S TA RT ” .
After formatting, the card will be ready to use.
My Computer
5395 4739
Loading...