Memorex MVD2113 User Manual
OWNER’S MANUAL
MANUAL DE INSTRUCCIONES
COMBINATION 13” COLOR TELEVISION
AND DVD/CD PLAYER
COMBINACION DE 13” TELEVISOR A COLOR
CON DVD/DISCOS COMPACTOS
MVD2113A
ENGLISH
ESPAÑOL
If you purchase a universal remote control from your local retailer, please contact the
remote manufacturer for the required programming code.
Si usted a comprado un control remoto universal, por favor comunicace con el fabricante
para el codico de programaccion requerido.
SELECCION DE MODO DE TV/CABLE
When shipped from the factory, the TV/CABLE menu option is set to the "CABLE"
(Cable T elevision) mode.
If not using CABLE (Cable TV), set this menu option to the "TV" mode.
Al salir la unidad de fábrica, la opción de menú de TV/CABLE se ajusta al modo de
"CABLE" (Televisión por cable).
Si no utiliza CABLE, ajuste esta opción de menú al modo de "TV".
Before operating the unit, please read this manual thoroughly.
Antes de usar la unidad, lea detenidadmente este manual de instrucciones.
5P20521A [E] COV. 5/12/04, 2:41 PM1
ATTENTION
ATENCION
TV/CABLE MODE SELECTION
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SER VICING T O
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
NOTE: Please keep all packaging material for at least 90 days in case you need to return this product
MOISTURE.
to your place of purchase or Memorex.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with
the FCC Rules could void the user's authority to operate this equipment.
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
Location of the required Marking
The rating sheet and the safety caution
are on the rear of the unit.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE
READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN
FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SER VICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE T O LASER BEAM, DO NOT
TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED.
DO NOT ST ARE INTO BEAM.
2
5P20521A [E] P02-05 5/12/04, 2:41 PM2
UHF/
VHF
CERTIFICATION: COMPLIES WITH
FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
and to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installations such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.
10. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way . This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped
with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
PORTABLE CART WARNING
(symbol provided by RETAC)
S3126A
ENGLISH
5P20521A [E] P02-05 5/12/04, 2:41 PM3
3
IMPORTANT SAFEGUARDS (Continued)
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits, as
contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c
. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f
20. REPLACEMENT PARTS
21. SAFETY CHECK
22. HEAT
23. DISC TRAY
24. CONNECTING
25. SOUND VOLUME
. When the unit exhibits a distinct change in performance, this indicates a need for service.
When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Keep your fingers clear of the disc tray as it is closing. It may cause serious personal injury.
When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.
4
5P20521A [E] P02-05 5/12/04, 2:41 PM4
26. SOUND DISTORTION
Do not allow the product to output distorted sound for an extended period of time. It may cause speaker
overheating and fire.
27. HEADPHONES
When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.
28. LASER BEAM
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause eye damage.
29. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
30. NOTE TO CABLE TV SYSTEM INSTALLER
This reminder is provided to call the CABLE TV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
ENGLISH
EXAMPLE OF ANTENNA GROUNDING AS PER THE
ELECTRIC SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
CONDENSATION
Moisture will form in the operating section of the player if the player is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly. When this happens, player's
performance will be impaired.
To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or
make sure that the room temperature rises gradually.
Condensation may also form during the summer if the player is exposed to the breeze from an air
conditioner. In such cases, change the location of the player.
NATIONAL ELECTRICAL CODE
ANTENNA LEAD
IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
5P20521A [E] P02-05 5/12/04, 2:41 PM5
5
Features
Color TV With DVD/CD player
Unique space saving design combines a 13" color TV and a DVD/CD player.
The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture/Audio quality of the
DVD exceeds other software. Picture quality is higher than Super VHS. Audio quality is higher than audio CD. The
DVD also has special options; audio language selection, subtitle language selection or multi-angle, etc.
The DVD PLAYER can play back audio CDs.
High Quality Picture
Horizontal Resolution
More than 500 lines. It exceeds Super VHS (400 lines) or Laser Disc (430 lines) in resolution.
Compatible with a wide range of DVD audio outputs
Digital Audio Jack (Coaxial)
• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect
of being in a movie theatre or a concert hall.
• Surround standard different from Dolby Digital. This format is already in use in many theatres. By connecting this
unit to a DTS decoder or an A V amplifier with a built-in DTS decoder , the DTS audio of DVD discs recorded in this
format can be enjoyed. However, audio will not be output from the analog audio output jacks.
• By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs recorded
in this format can be enjoyed.
• The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.
Convenience Features
Direct selection of your desired scenes using Title/Chapter/Time/T rack - You can play back from the desired
scene.
Recalling Up to 3 Scenes (DVD only) - You can program up to 3 scenes in memory and recall the marked scenes.
Frame Advance - The PAUSE/STILL moves one frame at a time.
Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/7-1/2 times.
Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.
Program Playback (Audio CD) - You can play back tracks in programmed sequences.
Zoom (DVD only) - You can zoom in the selected subject on the screen during playback.
Note: Make sure that discs are suitable for the following functions.
Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back for
movies or programes.
Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc,
you can change the angles during playback.
Parental Control - Y ou can limit the play back of scenes or sounds of adult DVD discs which have parental level.
Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.
TV Features
181 Channel Tuner - Receives standard VHF and UHF broadcast channels and up to 113 cable channels. The
actual number of channels received depends upon channel reception in your area or your cable system.
Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for
hearing impaired viewers.
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed up to 120
minutes to turn off automatically.
On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for onscreen programming.
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded
with this information. V-chip will allow you to set a restriction level.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be authorized by Macrovision Corporation and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
6
5P20521A [E] P06-11 5/12/04, 2:41 PM6
Contents
Before using your unit
IMPORTANT SAFEGUARDS .............................................. 3
Features ............................................................................... 6
Contents............................................................................... 7
Parts and functions ..............................................................8
Remote control.....................................................................9
Power source ..................................................................... 10
Antenna connections.......................................................... 11
Cable TV connections........................................................ 12
TV operation
Setting the language .......................................................... 13
TV operation....................................................................... 14
Closed caption ...................................................................16
Memorizing channels ......................................................... 17
Setting the V-Chip ..............................................................19
Picture control adjustment.................................................. 22
Adjusting the picture preference ........................................23
Stereo and second audio program (SAP) .......................... 24
Playback operation
Disc .................................................................................... 25
Preparation/Status display of disc...................................... 26
Setting setup language ......................................................27
Playback procedure ...........................................................28
Special playback ................................................................ 29
Advanced Function
Zooming/Locating desired scene ....................................... 30
Repeat playback ................................................................31
Program playback/Random playback (CD)........................32
Marking desired scenes ......................... ........................... 33
Changing soundtrack language/Subtitles .......................... 34
Changing angles/Title selection/DVD menu....................... 35
ENGLISH
5P20521A [E] P06-11 5/12/04, 2:41 PM7
Additional Information
Setting the aspect ratio of TV screen/
Setting on screen display................................................... 36
Dynamic Range Control .....................................................37
Parental control setting ..................................................... 38
Changing the parental level .............................................. 39
Temporary disabling of rating level by DVD disc ................ 40
Setting menu language ...................................................... 41
Setting subtitle language.................................................... 42
Setting audio soundtrack language.................................... 43
Language code list ............................................................. 44
Connections to other equipment ........................................ 45
Reception disturbances...................................................... 47
Problems and troubleshooting ...........................................48
Specifications ..................................................................... 50
7
Parts and functions
Front
Power indicator
POWER button
Disc tray
SKIP buttons
Headphones jack
Rear
UHF/
VHF
AC power cord
Remote sensor
OPEN/CLOSE button
VOLUME UP/DOWN buttons
CHANNEL UP/DOWN buttons
AUDIO IN (L/R) jacks
VIDEO IN jack
STOP button
PLAY button
RF IN jack
UHF/
VHF
COAXIAL DIGITAL AUDIO OUT jack
8
5P20521A [E] P06-11 5/12/04, 2:41 PM8
ATTENTION
If you purchase a universal remote control
from your local retailer, please contact the
remote manufacturer for the required
programming code.
Remote control
Page
POWER Power On/Off 13,14,26,28
DISPLAY/CALL Call TV information 15
TV/DVD Switch between TV/AV and DVD 26,27,37
OPEN/CLOSE Open or Close the tray 28,40
0-9 Direct channel selection of TV 14,18
VOL +/– Adjust volume of TV 14
MUTE Switch off the sound 15
SLEEP Sleep timer 15
CH
/ Select channel of TV 15
SELECT/ENTER Enter information in the menu 13,19,20~23,27,
SETUP/TV MENU
DVD MENU Display DVD menu 35
CANCEL
TOP MENU Select title 35
SEARCH
8/9 Fast Forward/Review playback 29
PLAY
A Playback 28,29,31,32,35,40
SKIP
/ Skip chapter to forward or reverse 29
SUBTITLE Set subtitle 34
STOP Stop 28
SLOW / Forward/Reverse- slow motion 29
PAUSE/STILL Pause CD sound 29
PLAY MODE Select playback mode 31,32
RETURN Remove DVD set up menu 27,36~43
REPEAT A-B Repeat playback between A and B 31
ANGLE Change playback angle 35
AUDIO Switch the sound of TV 24
MARKER Index 33
JUMP Locating desired scene 30
TV/CAP/TEXT Switch between TV/Caption/Text in 16
QUICK VIEW/ZOOM Switch between present/last channel 15
INPUT SELECT Switch between TV/AV 46
Call DVD information 26
Input setting 30,32
Enter a password 19,21,38~40
Cursor buttons 13,17~23,27,28,30~33,
28,30~33,35~43
TV mode - Display menu of TV
DVD mode - Call up initial setup mode
Reset information in the menu 19,21,22,30,32,33,38,39
direction
Still picture of DVD
Change sound track language 34
Closed Caption mode
Zoom 30
36~43
13,17~23
27,36~39,41~43
ENGLISH
5P20521A [E] P06-11 5/12/04, 2:41 PM9
9
Remote control (Continued)
Inserting Batteries
Open the battery compartment
1
cover in the direction of the
arrow.
Operation
• Aim the remote control at the remote sensor and
press control buttons to operate.
• Operate the remote control within 30° angle on
either side of the remote sensor, up to a distance of Approx. 5 meters.
NOTES:
•
Do not leave the remote control unit exposed to direct sunlight or in hot or humid places.
•
The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the remote
sensor may shorten operating distance.
•
Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries
properly.
•
Do not mix old and new batteries.
•
Remove batteries if the remote control will not be operated for an extended period of time.
Install two "AAA" batteries
2 3
(not supplied), paying attention
to the polarity diagram in the
battery compartment.
Replace the compartment
cover.
Approx. 5 meters
Power source
AC Outlet
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other)
10
5P20521A [E] P06-11 5/12/04, 2:41 PM10
TO USE AC POWER
Use the AC polarized line cord provided for operation on AC. Insert
the AC cord plug into a standard 120V 60Hz polarized AC outlet.
NOTES:
Never connect the AC line cord plug to anything other than the
•
specified voltage (120V 60Hz). Use the attached power cord only.
If the polarized AC cord does not fit into a non polarized AC
•
outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
If you cause a static discharge when touching the unit, and the
•
unit fails to function, simply unplug the unit from the AC outlet,
wait a few minutes, and plug it back in. The unit should return to
normal operation.
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a cable TV service (CABLE), see page 12 for Cable TV connections.
Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
ENGLISH
75 ohm
coaxial
cable
Antenna
jack
300-75 ohm
matching
transformer
Antenna
jack
Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300 ohm
twin-lead wire to the 300-75 ohm matching transformer. Attach the transformer to the combiner, then
attach the combiner to the antenna jack.
Antenna
jack
Combiner
UHF 300 ohm
300-75 ohm
matching
transformer
VHF 300 ohm
Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Connect the VHF 75 ohm cable and UHF 300
ohm twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack.
Antenna
jack
Combiner
UHF 300 ohm
5P20521A [E] P06-11 5/12/04, 2:41 PM11
VHF 75 ohm
11
Cable TV connections
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable
TV converter box. Some cable companies offer “premium pay channels” in which the signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device
which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a converter/descrambler
connect the 75 ohm coaxial cable directly to the antenna
box,
on the back of the TV/DVD.
jack
75 ohm
coaxial cable
Antenna
jack
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming
the output jack
shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4)
and use the converter/descrambler box to select channels.
75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections
Incoming
75 ohm
Cable TV cable
Converter/
descrambler
75 ohm cable to
TV/DVD
Antenna
jack
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require
the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available
from the cable company or an electronics supply store). Follow the connections shown below. With the switch in
the “B” position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A”
position, tune your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the
converter/descrambler box to tune scrambled channels.
Incoming
75 ohm
Cable TV cable
Splitter
12
5P20521A [E] P12-17 5/12/04, 2:41 PM12
Converter/
descrambler
A/B Switch
A
B
75 ohm cable
to TV/DVD
Antenna
jack
Setting the language
LANGUAGE/IDIOMA/LANGUE
/ /
ENTER/MENU
CH
C
A
B
LANGUAGE/IDIOMA/LANGUE
/MENU
CH
C
A
B
You can choose from three different languages (English, French and Spanish) for the on-screen displays.
To turn on the TV/DVD, press POWER. The Power indicator
1
will light.
Press TV MENU in the TV mode.
2
The TV menu screen will appear.
Press or to select
3
option.
Press or to select the
4
desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER.
Press TV MENU until the menu
5
screen is cleared.
ENGLISH
NOTES:
If the unit does not operate properly
•
(by the buttons on the unit and/or the
remote control) disconnect the AC
cord, wait a few minutes and plug it
back in. Static electricity, etc., may have
affected the player's operation.
The TV section has its own menu and
•
also DVD section has its own menu
(see page 27).
5P20521A [E] P12-17 5/12/04, 2:41 PM13
13
TV operation
To turn on the TV/DVD, press
1
POWER.
Adjust the volume level by
2
pressing VOL + or – . The
volume level will be indicated on
the screen by green bars. As the
volume level increases, so do
the number of bars. If the volume
decreases, the number of green
bars also decreases.
VOLUME 32
NOTES:
If a channel with no broadcast is
•
selected, the sound will automatically be muted.
If a station being viewed stops
•
broadcasting, the TV will automatically shut itself off after 15 minutes.
Set the TV/CABLE menu
3
option to the appropriate
position. (See page 17.)
Press the Direct Channel selection
4
buttons to select the channel.
TV Mode Direct Channel Selection
When the TV/CABLE menu option
is in the TV position, all channels
can be instantly selected by using
two buttons. (for example, to select
channel 2, press “0”, then “2”. If
you press only “2”, channel
selection will be delayed for a few
seconds.) For channels 10 and
above, press the 2 digits in order.
CABLE Mode Direct Channel Selection
When the TV/CABLE menu option is in the CABLE position, channels
can be selected as follows:
TO SELECT Cable TV CHANNELS:
1-9: Press “0” twice, then 1-9 as needed. Example, to select
10-12: Press “0”, then the remaining 2 digits. Example, to
13-99: Press the 2 digits in order. Example, to select channel
100-125: Press the 3 digits in order. Example, to select channel
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds.
channel 2, press “002”.
select channel 12, press “012”.
36, press “36”.
120, press “120”.
TV
VHF
2-13
UHF
14-69
CABLE
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV - VHF/UHF channels
CABLE - CABLE channels
CH 02
14
5P20521A [E] P12-17 5/12/04, 2:41 PM14
CHANNEL UP/DOWN
STEREO SAP CH 012
SEL. STEREO
MUTE
Press and release CH or . The
channel automatically stops at the
next channel set into memory.
For proper operation, before selecting channels, they should be set into
the memory. See pages 17 and 18
“To memorize channels”
CALL
Press DISPLAY/CALL to display the
current information on the screen.
Press DISPLAY/CALL again to clear
the call display.
• Channel number or VIDEO mode
• Stereo or SAP (second audio
program) audio status
• Audio output status
QUICK VIEW
This button allows you to go back to
the last channel selected by pressing QUICK VIEW. Press QUICK
VIEW again to return to the last
channel you were watching.
MUTE
Press MUTE to switch off the sound.
The TV/DVD’s sound will be silenced
and “MUTE” will briefly appear on the
screen. The sound can be switched
back on by pressing this button
again or one of the VOL + or –
buttons.
ENGLISH
5P20521A [E] P12-17 5/12/04, 2:41 PM15
SLEEP
To set the TV/DVD to turn off after a
preset amount of time, press SLEEP
on the remote control. The clock will
count down 10 minutes for each press
of SLEEP (120, 110, ...10, 0). After the
sleep time is programmed, the display
will appear briefly every ten minutes
to remind you that the sleep timer is
operating. To confirm the sleep timer
setting, press SLEEP and the remaining time will be displayed for a few
seconds. To cancel the sleep timer,
press SLEEP repeatedly until the dis-
play turns to 0.
SLEEP
120
15
Closed caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display closed captioned television programs. closed captioning
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
Captions: This closed caption mode will display text on the
screen in English or another language (depending on the setting of the closed captions CH 1/2).
Generally, closed captions in English are transmitted on captions
channel 1 and closed captions in other languages are transmitted
on captions channel 2.
The captions will appear in places on the screen where they will
least interfere with the picture, usually on the bottom of the screen.
News programs will usually show three-line closed captions which
scroll onto the screen.
Most other shows provide two or three lined captions placed
near the character who is speaking so the viewer can follow the
dialogue. Words in italics or underlined describe titles, words in
foreign languages or words requiring emphasis. Words that are
sung usually appear enclosed by musical notes.
Text: The text closed caption mode will usually fill the screen
with a programming schedule or other information.
After selecting a closed caption mode, it will stay in effect until it
is changed, even if the channel is changed.
If the captions signal is lost due to a commercial or a break in
the signal, the captions will reappear when the signal is received
again. If the channels are changed, the captions will be delayed
approximately 10 seconds.
For television programs broadcasting with closed captions, look
in your TV guide for the closed captions symbol (CC).
TO VIEW CLOSED CAPTIONS
Press TV/CAP/TEXT to switch
between normal TV and the two
closed caption modes (captions
and full screen text). Closed
captioning will display text on the
screen for hearing impaired
viewers.
NOTES:
• When selecting closed captions, the captioning will be delayed approximately 10 seconds.
• If no caption signal is received, no captions will appear, but the television will remain in the caption mode.
• Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with
closed captioning, especially with live programs. This is because during live programs, captions are also
entered live. These transmissions do not allow time for editing.
• When captions are being displayed, on-screen displays, such as volume and mute may not be seen or may
interfere with closed captions.
• Some cable systems and copy protection systems may interfere with the closed captioned signal.
• If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception
or use an outdoor antenna.
16
5P20521A [E] P12-17 5/12/04, 2:42 PM16
Memorizing channels
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / / /
MENU
CABLE
C
A
B
CH
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / / /
MENU
CABLE
C
A
B
CH
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / / /
MENU
TV
C
A
B
CH
This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed
into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up to 113
Cable TV channels. To use this TV/DVD with an antenna, set the TV/CABLE menu option to the TV mode. When
shipped from the factory, this menu option is in the CABLE mode.
TV/CABLE SELECTION
Press TV MENU in the TV mode.
1
The TV menu screen will appear.
ENGLISH
Press
2
3
4
5
or to select
option.
or to select the
Press
“TV/CABLE” option.
Press or to select the TV
or CABLE mode.
TV - VHF/UHF channels
CABLE - CABLE channels
Press TV MENU until the menu
screen is cleared.
CH
Cable TV CHART
The chart below is typical of many cable system channel allocations.
17
5P20521A [E] P12-17 5/12/04, 2:42 PM17
Memorizing channels (Continued)
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / / /
MENU
CABLE
C
A
B
CH
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / /
MENU
CABLE
C
A
B
CH
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / /
MENU
CABLE
C
A
B
CH
AUTOMATIC MEMORY TUNING
Press TV MENU in the TV mode.
1
The TV menu screen will appear.
Press
2
Press or to select the “AUTO
3
CH MEMORY”, then press
The TV will begin memorizing all the
channels available in your area.
Press TV MENU until the menu
4
screen is cleared.
TO ADD/DELETE CHANNELS
Press TV MENU. The TV
1
menu screen will appear.
Press or select CH option.
2
or select CH option.
.
CH
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
MENU
/ / / /
A
B
C
CABLE
18
5P20521A [E] P18-26 5/12/04, 2:42 PM18
Press or to select the
3
“ADD/DELETE”, then press
Select the desired channel to be
4
memorized or deleted using Direct
Channel Selection (0-9), or CH
.
ADD
or
.
or to select ADD or
Press
DELETE, whichever function you
MENU
// / / /
0-9
want to perform.
Press TV MENU until the menu
5
screen is cleared.
Repeat steps 1~5 for other channels you want to add or delete.
6
CH 001
/ / / /
MENU
CH
C
A
B
0-9/ENTER/CANCEL/MENU
CH
C
A
B
0-9/ENTER/CANCEL/MENU
V-CHIP SET
NEW
PASSWORD :
CH
C
A
B
Setting the V-Chip
An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc.
The unit corresponds to "TV RATING" and "MOVIE RATING". To use the V-Chip function, you must
register a password.
TO REGISTER PASSWORD
Press TV MENU in the TV mode.
1
The TV menu screen will appear.
Press or to select option,
2
then press
“PASSWORD”.
Enter the password (4 digits)
3
using Direct Channel Selection
(0-9), then press ENTER.
If you put a wrong number, press
CANCEL.
Enter the same password again
4
for the safety, then press ENTER.
Now the password was registered
and V-Chip setting menu will
appear on the display.
or to select
" " appears instead of the number.
ENGLISH
NOTES:
If you forget the password, you
•
cannot set the V-chip.
To avoid forgetting the password,
•
write it down and keep in the safe
place.
19
5P20521A [E] P18-26 5/12/04, 2:42 PM19
Setting the V-Chip
V-CHIP
V-CHIP SET
CHANGE PASSWORD
/ / / /
MENU
OFF
CH
C
A
B
TO SET THE V-CHIP
In the V-CHIP SET menu, press
1
or to select “ V-CHIP SET”,
then press
.
(continued)
A
B
CH
C
V-CHIP
V-CHIP SET
CHANGE PASSWORD
MENU
/ / /
OFF
To use the TV after the TV is protected.
When the program applied to the V-Chip
setting is received, enter the password,
then press ENTER. When the password is
entered correctly the protection will be
temporarily overridden.
NOTES:
• The V-Chip function is activated only on
programs and tapes that have therating
signal.
• If you are changing channels using
a VCR or a cable box, while the TV
remains on channel 3 or 4, the V-Chip
operates differently. When you enter
your password to temporarily release
the block on any channel, you have
completely disabled the V-Chip function
for all stations. To reset the V-Chip turn
your TV off and back on.
• Some cable boxes are built with a delay
feature, in some cases it can take up to
10 seconds for a program to appear
after the password has been input.
Press or to select “TV
2
RATING”, then press
display the desired setting.
OFF : TV RATING is not set
or to
V-CHIP SET
TV RATING
MOVIE RATING
CH
TV-Y : All children
TV-Y7: 7 years old and above
TV-G : General audience
/ / / /
ENTER/MENU
TV-PG: Parental guidance
TV-14 : 14 years old and above
TV-MA: 17 years old and above
When you select TV- Y7, TV-PG, TV-14 or TV-MA, press
DISPLAY/CALL to show the contained rating. Press
to select the desired item you want. Press or to select
the setting “ON” or “OFF”.
Press
3
RATING”.
Press or to select
4
rating, then press ENTER.
OFF : MOVIE RATING is not set
G : All ages
or to select “MOVIE
desired
V-CHIP SET
TV RATING
MOVIE RATING
ENTER/MENU
/ / / /
V - CHIP SET
TV RATING
MOVIE RATING
CH
CH
PG : Parental guidance
PG-13 : Parental guidance
less than 13 years old
/ / / /
ENTER/MENU
R : Under 17 years old
Parental guidance suggested
NC-17 : 17 years old and above
X : Adult only
Press
5
“V-CHIP”.
Press
6
Now your settings were set into
the memory.
Press TV MENU until the menu
7
screen is cleared.
or to select
or to display “ON”.
CH
V-CHIP
V-CHIP SET
CHANGE PASSWORD
MENU
/ / / /
A
B
C
or
A
B
C
A
B
C
TV - Y7
PG - 13
A
B
C
TV-Y7
OFF
TV-Y7
OFF
ON
20
5P20521A [E] P18-26 5/12/04, 2:42 PM20
TO CHANGE PASSWORD
Press TV MENU in the TV mode.
1
The TV menu screen will appear.
2
Press
3
4
or to select option.
or to select the
Press
“PASSWORD”.
Enter the Password using Direct
Channel Selection (0-9), then
press ENTER.
If you put a wrong number, press
CANCEL.
Press
5
or to select
“CHANGE PASSWORD”, then
.
press
CH
MENU
/ / / /
CH
0-9/ENTER/CANCEL/MENU
CH
V-CHIP SET
PASSWORD :
0-9/ENTER/CANCEL/MENU
CH
V-CHIP
V-CHIP SET
CHANGE PASSWORD
MENU
/ / /
A
B
C
A
B
C
A
B
C
A
B
C
ON
ENGLISH
5P20521A [E] P18-26 5/12/04, 2:42 PM21
Enter the new password using
6
Direct Channel Selection (0-9),
then press ENTER.
Enter the same password again
7
to confirm, then press ENTER.
Press TV MENU repeatedly to
8
return to normal screen.
CH
0-9/ENTER/CANCEL/MENU
CH
A
B
C
A
B
C
21
Picture control adjustment
PICTURE
PICTURE PREFERENCE
/ / / /
MENU
C
A
B
CH
PICTURE
PICTURE PREFERENCE
/ / /
MENU
C
A
B
CH
/ / / /
CANCEL / MENU
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
0
+32
0
0
0
C
A
B
CH
Picture controls are factory preset but you can adjust them individually as follows:
Press TV MENU in the TV mode.
1
The TV menu screen will appear.
Press or to select
2
option.
Press or to select
3
“PICTURE”, then press
.
NOTE:
The CONTRAST default setting is set
to maximum at the factory.
Press
4
you want to adjust.
Press or to adjust the setting.
5
After your desired setting changes press TV MENU until the
6
menu screen is cleared.
or to select the item
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
increase brightness
increase contrast
brilliant color
greenish color
makes picture clearer
decrease brightness
decrease contrast
pale color
reddish color
makes picture softer
CANCEL
Pressing CANCEL while making picture adjustments will return all
adjustments to the factory preset levels.
22
5P20521A [E] P18-26 5/12/04, 2:42 PM22
Adjusting the picture preference
PICTURE
PICTURE PREFERENCE
/ / / /
MENU
C
A
B
CH
PICTURE PREFERENCE
STANDARD
SPORTS
MOVIE
MEMORY
/ /
ENTER / MENU
C
A
B
CH
PICTURE
PICTURE PREFERENCE
/ / /
MENU
C
A
B
CH
You can select four picture modes–STANDARD, SPORTS, MOVIE, and MEMORY– as described in the
following table:
Press TV MENU in the TV mode.
1
The TV menu screen will appear.
Press
2
3
4
or to select
option.
Press or to select
“PICTURE PREFERENCE”,
then press
.
Press or to select the
desired picture mode, then
press ENTER.
ENGLISH
5P20521A [E] P18-26 5/12/04, 2:42 PM23
Mode Picture quality
STANDARD Standard picture quality (factory-set)
SPORTS Bright and dynamic picture (factory-set)
MOVIE Movie-like picture setting (factory-set)
MEMORY Your personal preferences (set by you; see
After your desired setting changes press TV MENU until the
5
menu screen is cleared.
“Picture control adjustment” on the page 22)
23
Stereo and second audio program (SAP)
STEREO SAP CH 013
STEREO CH 013
SEL. STEREO
The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly
enhance TV viewing by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for other purposes.
LISTENING TO STEREO SOUND
When the TV is turned on or a
channel selection is made, make
certain the STEREO appears on
the screen. This means that
“Stereo” broadcasting is available. You can enjoy stereo
sound from the left and right
speakers.
• When “Mono” broadcasting is
received, no indication is
displayed.
• If the broadcast signal is not
strong enough or clear stereo
sound is not available, press
AUDIO to change to mono
sound. The noise should be
eliminated. Press it again to
return to the stereo sound.
LISTENING TO SAP (SECOND AUDIO PROGRAM)
When the TV is turned on or a
channel selection is made, make
certain the SAP appears on the
screen. This means that the
“Second Audio Program”
broadcasting is available.
24
5P20521A [E] P18-26 5/12/04, 2:42 PM24
TO SELECT DESIRED SOUND
Press AUDIO to select the
desired sound.
STEREO+SAP BROADCASTING
STEREO SOUND
(MAIN)
MONO SOUND
(MAIN)
SAP SOUND
Disc
This unit applies to DVD discs from Region 1 or Region ALL.
The loaded Disc (DVD and Audio-CD) will be recognized automatically.
The suitable disc formats are: DVD-Video, CD, CD-R/RW and DVD-R/RW (Video format only).
Some CD-R/RW discs may be incompatible.
Do not play DVD-ROM, DVD-Audio, CDV, CD-G, Video CD or Photo CD to prevent accidental erasure of prerecorded
material.
This unit does not play MP3/WMA/JPEG files.
DVD DISC
Title
When two or more movies are recorded on a disc,
the disc is divided into two or more sections. Each
section is called a “TITLE”.
Chapter
The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.
Track
An Audio CD can contain several items.
These are assigned to tracks.
TITLE1 TITLE2
CHAPTER 1
TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5
CHAPTER 2 CHAPTER 2 CHAPTER 3CHAPTER 1
Audio-CD
ENGLISH
Removing Disc from Case
Be sure to hold the edge of disc. Do not touch the surface of the disc.
Pick up the disc gently from the case.
• Do not scratch the disc.
• Do not get dirt on the surface of the disc.
• Do not stick a label or adhesive tape on the disc.
• Do not drop or bend the disc.
Storing Disc
• Store the disc in the case to avoid risk of scratches, dirt or damage.
• Do not leave disc exposed to direct sunlight or in hot or humid places.
Cleaning Disc
Wipe the disc with a clean, dry cloth from center to edge.
• Do not wipe in circular direction.
• Do not use liquid or aerosol cleaners.
5P20521A [E] P18-26 5/12/04, 2:42 PM25
25
Preparation/Status display of disc
No Disc
The following pages describe the
setup/operation in DVD mode.
Preparation
Before DVD/CD operation, please make preparations as follows.
Insert the AC cord plug into a standard 120V 60Hz polarized
1
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
Press POWER on the unit or on the remote control to turn on
2
the unit. The POWER indicator will light.
• Every time you press POWER, the TV/DVD starts from TV
mode.
• When using an amplifier, switch on the amplifier.
Press TV/DVD to select DVD
3
mode.
The DVD startup screen will appear on the screen.
Status display of disc
Press DISPLAY/CALL twice. The status display of the disc will
appear on the screen.
DVD
Chapter number
Title elapsed playing time
00:34:56 01:12:33
Chapter 1/999
EngDolby Digital
Eng
1/9
Title total time
Camera angle
Type of audio
Disc operation
Audio language
Subtitle language
Title number
Title 1/99
1/8
1/32
NOTE:
If the unit does not operate properly:
Static electricity, etc., may affect the
player's operation. Disconnect the AC
power cord once, then connect it again.
26
5P20521A [E] P18-26 5/12/04, 2:42 PM26
To make status display disappear, press DISPLAY/CALL again.
Audio CD
Track elapsed playing time
Disc operation
Track number
• When you play a CD disc, the status display will appear
and remain on the screen.
T rac k 11/99
34:56 71:33
Track total time
You can change the default settings
OSD Language English English
Francais
Espanol
/Enter/Setup/Return
Language Picture Parental OtherSound
OSD Language English
/Enter/Setup/Return
Language Picture Parental OtherSound
/Enter/Setup/Return
Language Picture Parental OtherSound
No Disc
to customize performance to your
preference.
Setting setup language
Press TV/DVD to select
1
the DVD mode.
“No Disc” will appear on
the screen. (If a DVD disc
has already loaded, the
playback will start
automatically.)
Press SETUP in the stop
2
mode. The SETUP MENU
of DVD will appear on the
screen.
Then press
“Other”.
Press or ENTER to
3
select “OSD Language”.
Press or ENTER and
4
then press
select desired language
(e.g. English), then press
ENTER.
to select
or to
ENGLISH
NOTES:
• If the selected soundtrack language is
not recorded on the disc, the original
language will be heard.
• If the selected subtitle language is not
recorded on the disc, the first-priority
language is selected.
5P20521A [E] P27-32 5/12/04, 2:42 PM27
Press SETUP or RETURN to remove the Menu screen.
5
27
Playback procedure
Reading
NOTES:
• If a non-compatible disc is loaded,
“Incorrect Disc”, “Region Code Error” or
“Parental Error” will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 25 and 38).
• Some discs may take a minute or so to
start playback.
• A “Prohibition” symbol
the upper left of the screen.
This symbol means either the feature you
tried is not available on the disc, or the
unit can not access the feature at this
time. This does not indicate a problem
with the unit.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the
unit, “Reading” will appear on the display
and then “Incorrect Disc” will be dis played.
• Some playback operations of DVDs may
be intentionally fixed by software
producers. Since this unit plays DVDs
according to the disc contents the
software producers designed, some
playback features may not be
available. Also refer to the instructions
supplied with the DVDs.
may appear at
28
Press TV/DVD to select
1
the DVD mode.
Press OPEN/CLOSE on
the unit or the remote
control.
The disc tray will open.
Place a disc onto the
2
tray. Position it with the
printed label side up,
align it with the guides,
and place it in its proper
position.
Press PLAY or OPEN/
3
CLOSE.
The disc tray closes
automatically.
On the screen,
to “Reading” and then
playback will commence.
• A menu screen may
appear on the TV screen,
if the disc has a menu
feature. In this case,
press
ENTER to operate a
menu feature.
Press STOP to end playback.
4
• The unit memorizes the stopped point, depending on
the disc. “
Press PLAY to resume playback (from the scene point).
• If you press STOP again (“
or unload the disc, the unit will clear the stopped point.
Then press OPEN/CLOSE.
5
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and unit turns off.
changes
, , , or
” appears on the screen for approx. 4 seconds.
” appears on the screen)
5P20521A [E] P27-32 5/12/04, 2:42 PM28
NOTE: There may be a slight delay between when you press the button and
the function activating.
Special playback
Fast Forward Playback
Press SEARCH during normal playback.
Each press of the SEARCH
of the search
(CD:
• To resume normal playback, press PLAY.
(x 2), (x 4), (x 8), (x 15).
(x 2), (x 4), (x 8), (x 20))
Review Playback
Press SEARCH during normal playback.
Each press of the SEARCH
of the search
(CD:
• To resume normal playback, press PLAY.
(x 2), (x 4), (x 8), (x 15).
(x 2), (x 4), (x 8), (x 20))
Still Playback
Press PAUSE/STILL during
normal playback to pause playback.
T o resume normal playback,
press PLAY.
Frame Advance
Press PAUSE/STILL during still playback.
One frame is advanced each time you press PAUSE/STILL.
button will increase the speed
button will increase the speed
ENGLISH
NOTE:
The unit is capable of holding a still video
image or On screen display image on your
television screen indefinitely. If you leave
the still video image or On screen display
image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
5P20521A [E] P27-32 5/12/04, 2:43 PM29
T o resume normal playback, press PLAY.
Slow-motion Playback
Press SLOW
normal playback or still playback.
Each press of SLOW will change the speed of the slow x1/2,
x1/4, x1/6, x1/7.
• To resume normal playback, press PLAY.
• To resume the still playback, press PAUSE/STILL.
( )
Reverse or SLOW
( )
Forward during
Locating a chapter or track
Press SKIP( ) Forward or SKIP( ) Reverse during
playback to locate a chapter that you want to watch.
Each time you press the button, a chapter or track is
skipped.
29
Zooming/Locating desired scene
1
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump
Zooming
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
Press ZOOM during play-
1
back.
The center part of the
image will be zoomed in.
Each press of ZOOM will
change the ZOOM
(x 1.3),
3 (x 2.0).
2 (x 1.5) and
1
NOTES:
• You can select the Pause, Slow or
Search playback in the zoom mode.
• Some discs may not respond to zoom
feature.
Press
2
You may move the frame from the center position to UP,
DOWN, LEFT or RIGHT direction.
In the zoom mode press ZOOM repeatedly to return to a
3
1:1 view (
/ / / to view a different part of the frame.
Off).
Locating Desired Scene
Use the title, chapter and time recorded on the disc to
locate the desired point to play back.
Press JUMP during play-
1
back.
Press or to select the “Time”, “Title” or “Chapter”.
2
Press Direct channel selection (0–9) to input the number .
3
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
Press ENTER.
4
• Playback starts.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.
30
5P20521A [E] P27-32 5/12/04, 2:43 PM30
Loading...